Stillen air to air conversion fabrication thread

Pauly Z · 02-16-2016, 09:02 AM

OK so that setup works then? I just need to space the MAFs?

Sent from my SM-N920V using Tapatalk

TopgunZ · 02-16-2016, 09:11 AM

?? You should read through the threads. This setup does not work with MAF's.

EVOHUNTER · 02-16-2016, 09:13 AM

This setup will only work with SD tuning through ECUTEK.

You need a Haltech 3bar map sensor, inline filter, and needs to be hooked up to your factory vacuum lines.

Pauly Z · 02-16-2016, 09:21 AM

Oh, I was confused cause you still have the MAFS in there

Sent from my SM-N920V using Tapatalk

EVOHUNTER · 02-16-2016, 09:31 AM

MAfs are only there for IAT temp signals.

JWillis72 · 02-16-2016, 03:28 PM

When are you SD tuning it?

Boosted Performance · 02-16-2016, 04:19 PM

This build will be re-visited in the spring and the corrections will be made to make this work with MAF sensors as well.

I have a few ideas brewing in my head, and at least one will work for sure.

EliteXpress · 02-16-2016, 08:18 PM

nvdave04 · 02-16-2016, 10:22 PM

Quote:

Originally Posted by EliteXpress

Great video ! Again sorry to beat a dead horse but I'm just very frustrated that we spent this much $ on our stillen kits and consistently people are finding issues with it in regards to bad readings and heat soak... But never hear a word from stillen... I dunno it just bothers me... I don't see people with FI,AAM, BP kits always having to figure out ways to fix issues and 9/10 times I see Patrick from AAM or someone from FI working to solve the issues or chiming
In to atleast put some input..BP is always here to help his customers.. Sorry rant over lol

Edit - BP make me a single turbo setup to work with my 7at automatic lol

YzGyz · 02-16-2016, 10:33 PM

Quote:

Originally Posted by nvdave04

Great video ! Again sorry to beat a dead horse but I'm just very frustrated that we spent this much $ on our stillen kits and consistently people are finding issues with it in regards to bad readings and heat soak... But never hear a word from stillen... I dunno it just bothers me... I don't see people with FI,AAM, BP kits always having to figure out ways to fix issues and 9/10 times I see Patrick from AAM or someone from FI working to solve the issues or chiming
In to atleast put some input..BP is always here to help his customers.. Sorry rant over lol

Edit - BP make me a single turbo setup to work with my 7at automatic lol

I think this is because the other boost kits satisfy out needs and are a lot more versatile and able to accommodate future needs. The other kits had "upgrade" in mind while Stillen had a goal and met it (to make a little more power and carb) with no "upgrade" in mind.

YzGyz

swiss370Z · 02-16-2016, 10:45 PM

Quote:

Originally Posted by YzGyz

I think this is because the other boost kits satisfy out needs and are a lot more versatile and able to accommodate future needs.
The other kits had "upgrade" in mind while Stillen had a goal and met it (to make a little more power and carb) with no "upgrade" in mind.

YzGyz

Very well explained

EliteXpress · 02-16-2016, 10:59 PM

For me this is why I sold my 2010 Stillen Supercharged Z and decided to start over. I wanted more power and just didn't want to push what I had any further. I currently have a deposit on a new BP Kit.

nvdave04 · 02-16-2016, 11:38 PM

I agree with all said but if I remember correctly even with running the Kit as intended people were still seeing bad readings... To me it just does not make any since.. But I am very thankful for the people on this forum and what they contribute to ensure all the bugs are gone. BP and Topgunz A2A kits are my only savior and those people I do have faith In. Keep up the great work!

omG37S · 03-18-2016, 08:38 PM

I asked this on myG37.com, but I figured I would pose it here, as well, since this thread seemed to have the best and most information:

"What is the difference between the 370Z kit and the G37 coupe RWD kit? I found a great deal for one locally. Guy blew his engine from running the 10lb pulley with upgraded impeller with too small of injectors (GT-R injectors.) He has the 8lb, 9lb, and 10lb pulley included. He is also throwing in the trans cooler.

I intend to buy the FrozenBoost intercooler, 750cc injectors, 340lhp pump, GT-R spark plugs, Gator belt(s), and possibly the lightweight pulley for my initial install. I already have UpRev, so I will stick with that until the A2A kit has more time and is improved more, then I'll switch the EcuTek. Also will take off my hfc, and put back on the stock cats. I have 275 tires in rear, which only have about 3k miles on them, so I'll wait until I go A2A, or the tires are bald, before moving up to 305 (if they fit in my well -- 20x10.5 +35, dropped on coilovers) but no less than 295.

My initial goal was 500+whp, but I am going to remain realistic, and ~420whp will have to suffice until I go A2A.

Do I need to do the valve body upgrade right away, or wait until I go over 500whp? Also, I wanted a csf radiator, but don't believe they make one for the automatic. Any suggestions?

Any answers, help, advice, links would be greatly appreciated."

Elmo370z · 03-19-2016, 01:55 AM

Quote:

Originally Posted by EliteXpress

What front bumper is that?

02-16-2016, 09:02 AM	#181 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	OK so that setup works then? I just need to space the MAFs? Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-16-2016, 09:11 AM	#182 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	?? You should read through the threads. This setup does not work with MAF's. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 02-16-2016 at 09:18 AM.

02-16-2016, 09:13 AM	#183 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	This setup will only work with SD tuning through ECUTEK. You need a Haltech 3bar map sensor, inline filter, and needs to be hooked up to your factory vacuum lines. StillenZ84 likes this. __________________

02-16-2016, 09:21 AM	#184 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 11	Oh, I was confused cause you still have the MAFS in there Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

02-16-2016, 09:31 AM	#185 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	MAfs are only there for IAT temp signals. __________________

02-16-2016, 03:28 PM	#186 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	When are you SD tuning it?

02-16-2016, 04:19 PM	#187 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	This build will be re-visited in the spring and the corrections will be made to make this work with MAF sensors as well. I have a few ideas brewing in my head, and at least one will work for sure. swiss370Z and javi370z like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

02-16-2016, 08:18 PM	#188 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 10	Speed Density Tuning 370z Stillen Supercharger nvdave04 likes this.

02-16-2016, 10:59 PM	#192 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 10	For me this is why I sold my 2010 Stillen Supercharged Z and decided to start over. I wanted more power and just didn't want to push what I had any further. I currently have a deposit on a new BP Kit. jwick and nvdave04 like this.

02-16-2016, 11:38 PM	#193 (permalink)
nvdave04 Base Member Join Date: Jun 2014 Location: Covington LA- NOLA Posts: 108 Drives: 2013 370z base Rep Power: 11	I agree with all said but if I remember correctly even with running the Kit as intended people were still seeing bad readings... To me it just does not make any since.. But I am very thankful for the people on this forum and what they contribute to ensure all the bugs are gone. BP and Topgunz A2A kits are my only savior and those people I do have faith In. Keep up the great work! TopgunZ and StillenZ84 like this. __________________ 2013 370z base brilliant silver - AT -stillen supercharger kit -upgraded impeller, csf radiator,GTR injectors, walboro fuel pump, berks HFC, AAM S-line midpipe AAM S-line axleback - Z1 34 row oil cooler -stillen trans cooler, custom UpRev tune avantgarde m310 wheels

03-18-2016, 08:38 PM	#194 (permalink)
omG37S Base Member Join Date: Jun 2015 Location: New Orleans Posts: 41 Drives: 11 G37S Rep Power: 9	I asked this on myG37.com, but I figured I would pose it here, as well, since this thread seemed to have the best and most information: "What is the difference between the 370Z kit and the G37 coupe RWD kit? I found a great deal for one locally. Guy blew his engine from running the 10lb pulley with upgraded impeller with too small of injectors (GT-R injectors.) He has the 8lb, 9lb, and 10lb pulley included. He is also throwing in the trans cooler. I intend to buy the FrozenBoost intercooler, 750cc injectors, 340lhp pump, GT-R spark plugs, Gator belt(s), and possibly the lightweight pulley for my initial install. I already have UpRev, so I will stick with that until the A2A kit has more time and is improved more, then I'll switch the EcuTek. Also will take off my hfc, and put back on the stock cats. I have 275 tires in rear, which only have about 3k miles on them, so I'll wait until I go A2A, or the tires are bald, before moving up to 305 (if they fit in my well -- 20x10.5 +35, dropped on coilovers) but no less than 295. My initial goal was 500+whp, but I am going to remain realistic, and ~420whp will have to suffice until I go A2A. Do I need to do the valve body upgrade right away, or wait until I go over 500whp? Also, I wanted a csf radiator, but don't believe they make one for the automatic. Any suggestions? Any answers, help, advice, links would be greatly appreciated."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starting carbon fiber fabrication, questions	Gauge	Exterior & Interior	15	08-10-2012 07:44 AM
DIY: Custom License Plate LED Fabrication	tbonesteak	DIY Section (Do-It-Yourself)	31	05-16-2012 08:05 PM
metal fabrication.	jayl	Mid-Atlantic Region	9	04-25-2012 09:55 AM
Another Stillen SC thread!	weiboy718	Forced Induction	106	01-11-2011 01:27 AM