Stillen Air to Air setup

Originally Posted by TopgunZ

Disregard how the "old stillen" was set up. That's what were trying to get away from anyway. Since you are on a blow thru setup now you can dump to atmosphere. The only reason not to is to reduce bypass noise. Just put a breather filter on your valve cover. The only reason that line is there is to supply a filter of sorts that you already have. You can eliminate 2 vacuum lines. But it will still work either way.

Is Sasha custom fabbing your Y pipe? I was going to use the Y from the stillen kit as mine. Then either place my MAFS there or move them closer to where you have them in your drawing. But then I will need to buy some MAF housing pipe and 3D print a couple of plugs to put in the old holes of the Y.