Stillen Air to Air setup

DatsunFTW · 01-12-2016, 11:57 AM

Instead of helping out by funding the project we'll all just chip in for your booze

Sent from my LG-H900 using Tapatalk

JWillis72 · 01-12-2016, 12:00 PM

Hold on to it, I may still have to fly you down here before this is over!

Sent from my iPhone using Tapatalk

DatsunFTW · 01-12-2016, 12:02 PM

I'll pack a fresh bottle of Jack

Sent from my LG-H900 using Tapatalk

jaytirbhaw · 01-12-2016, 12:08 PM

When this car is done it will be legendary just because of all the things it took to get it running

JWillis72 · 01-12-2016, 04:21 PM

The trans fluid came out looking brand new, I wasn't expecting that.

Sent from my iPhone using Tapatalk

RadioFlyer · 01-12-2016, 04:45 PM

Damn... This is crazy. Any possibility a vac hose popped off the tranny somewhere? (I don't know what the AT runs off of on this car.)

StillenZ84 · 01-12-2016, 05:10 PM

That is just weird that the trans just out of nowhere started acting up as such low RPMs. Im curious, as are you I'm sure, what Level ten says happened to it. But if that noise was coming from the trans it was either that or the flex plate. My flex plate on really hot occasions makes a little chatter here and there but nothing like you described.

JWillis72 · 01-12-2016, 05:14 PM

The last time we ran it we both said something sounded strange at the end of the pull. I'm thinking whatever happened happened then. I have a FI flex plate that is heavy duty so I don't think that is it.

Sent from my iPhone using Tapatalk

StillenZ84 · 01-12-2016, 05:16 PM

Yeah I have the same flex plate and it chatters. But absolutely doesn't do what you described.

JWillis72 · 01-12-2016, 05:32 PM

Oh, thats right. It was strange that it sounded like it wasn't building at the same speed as the motor, it seemed to be building faster.

StillenZ84 · 01-12-2016, 05:37 PM

That is so odd. Well hopefully Pat gets it diagnosed, fixed, and back to you quick. I will for sure be waiting to see what he says it was.

JWillis72 · 01-12-2016, 06:09 PM

Pat was great about it, he only asked for me to pay shipping. He's a very nice guy, the car world could use more people like that.

Sent from my iPhone using Tapatalk

StillenZ84 · 01-12-2016, 06:12 PM

I agree. He has been there for every question I have ever had. Really great and caring guy.

JWillis72 · 01-12-2016, 06:28 PM

One think I noticed was that the BOV was much quieter that the BOV.

Sent from my iPhone using Tapatalk

JWillis72 · 01-12-2016, 07:21 PM

It out and no visible signs of damage.

Sent from my iPhone using Tapatalk

01-12-2016, 11:57 AM	#1141 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 379	Instead of helping out by funding the project we'll all just chip in for your booze Sent from my LG-H900 using Tapatalk __________________ The Build

01-12-2016, 12:00 PM	#1142 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Hold on to it, I may still have to fly you down here before this is over! Sent from my iPhone using Tapatalk TopgunZ likes this.

01-12-2016, 12:02 PM	#1143 (permalink)
DatsunFTW A True Z Fanatic Join Date: Apr 2013 Location: Gainesville, FL Posts: 1,234 Drives: 12 370z A54 M6 Rep Power: 379	I'll pack a fresh bottle of Jack Sent from my LG-H900 using Tapatalk __________________ The Build

01-12-2016, 12:08 PM	#1144 (permalink)
jaytirbhaw Track Member Join Date: Dec 2009 Location: NYC Posts: 814 Drives: 350z HR , Nismo 370z Rep Power: 16	When this car is done it will be legendary just because of all the things it took to get it running TopgunZ and TBatt like this. __________________ 2014 Nismo #350 , Built Motor, Top Mount Single Turbo .... 620 whp/ 500 lbs wtq 2012 Track/Drift Z, build coming soon. Build Thread - http://www.the370z.com/members-370z-...70z-build.html

01-12-2016, 04:21 PM	#1145 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	The trans fluid came out looking brand new, I wasn't expecting that. Sent from my iPhone using Tapatalk StillenZ84 likes this.

01-12-2016, 04:45 PM	#1146 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 39	Damn... This is crazy. Any possibility a vac hose popped off the tranny somewhere? (I don't know what the AT runs off of on this car.)

01-12-2016, 05:10 PM	#1147 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	That is just weird that the trans just out of nowhere started acting up as such low RPMs. Im curious, as are you I'm sure, what Level ten says happened to it. But if that noise was coming from the trans it was either that or the flex plate. My flex plate on really hot occasions makes a little chatter here and there but nothing like you described. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

01-12-2016, 05:14 PM	#1148 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	The last time we ran it we both said something sounded strange at the end of the pull. I'm thinking whatever happened happened then. I have a FI flex plate that is heavy duty so I don't think that is it. Sent from my iPhone using Tapatalk StillenZ84 likes this.

01-12-2016, 05:16 PM	#1149 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	Yeah I have the same flex plate and it chatters. But absolutely doesn't do what you described. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

01-12-2016, 05:32 PM	#1150 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Oh, thats right. It was strange that it sounded like it wasn't building at the same speed as the motor, it seemed to be building faster.

01-12-2016, 05:37 PM	#1151 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	That is so odd. Well hopefully Pat gets it diagnosed, fixed, and back to you quick. I will for sure be waiting to see what he says it was. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

01-12-2016, 06:09 PM	#1152 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Pat was great about it, he only asked for me to pay shipping. He's a very nice guy, the car world could use more people like that. Sent from my iPhone using Tapatalk StillenZ84 likes this.

01-12-2016, 06:12 PM	#1153 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	I agree. He has been there for every question I have ever had. Really great and caring guy. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

01-12-2016, 06:28 PM	#1154 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	One think I noticed was that the BOV was much quieter that the BOV. Sent from my iPhone using Tapatalk StillenZ84 likes this.

01-12-2016, 07:21 PM	#1155 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	It out and no visible signs of damage. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode