Stillen Air to Air setup

JWillis72 · 10-16-2015, 12:47 PM

Did you change out your flex plate?

Sent from my iPhone using Tapatalk

StillenZ84 · 10-16-2015, 01:25 PM

No, flex plate is the same. Was told that for a flex plate to fail, most times there are failing parts around it and the upgraded torque converter Level 10 adds will help add stability to the flex plate. Not sure if they swap it out with the 1000whp kit or not

JWillis72 · 10-16-2015, 01:31 PM

No, they don't make one.

Sent from my iPhone using Tapatalk

BOLIO 671 · 10-17-2015, 01:37 AM

How much is that Tow Bar from F.I.? Is this a direct replacement of the bumper support bar?

EVOHUNTER · 10-17-2015, 09:26 AM

Quote:

Originally Posted by BOLIO 671

How much is that Tow Bar from F.I.? Is this a direct replacement of the bumper support bar?

Hey willis,

Maybe you can get one of these?

this guys made one, super nice!

CNC 7AT Flex Plate

JWillis72 · 10-17-2015, 09:42 AM

Quote:

Originally Posted by EVOHUNTER

Hey willis,

Maybe you can get one of these?

this guys made one, super nice!

CNC 7AT Flex Plate

F.I. also has one that I plan to use if they are ready in time. They have them made but they need to be balanced.

Sales@F.I. Inc. · 10-20-2015, 06:37 PM

Quote:

Originally Posted by JWillis72

F.I. also has one that I plan to use if they are ready in time. They have them made but they need to be balanced.

Should be ready to ship in a few days. I will give you a call.

- Kevin

JWillis72 · 10-20-2015, 06:52 PM

Quote:

Originally Posted by Sales@F.I. Inc.

Should be ready to ship in a few days. I will give you a call.

- Kevin

Perfect

Sent from my iPhone using Tapatalk

JWillis72 · 10-17-2015, 09:40 AM

Quote:

Originally Posted by BOLIO 671

How much is that Tow Bar from F.I.? Is this a direct replacement of the bumper support bar?

It is a direct replacement and it's $429 + shipping.

JWillis72 · 10-27-2015, 02:11 PM

I will keep in touch.

Sent from my iPhone using Tapatalk

JWillis72 · 10-28-2015, 04:19 PM

Headers are in the car.

Sent from my iPhone using Tapatalk

StillenZ84 · 10-28-2015, 04:22 PM

Quote:

Originally Posted by JWillis72

Headers are in the car.

Sent from my iPhone using Tapatalk

Coming together nice man. Im really looking forward to seeing how it runs. It is going to be a huge change from where you were a few months ago thats for sure.

JWillis72 · 10-28-2015, 04:35 PM

The F.I. Flex plate will be here tomorrow and so should the trans, I'm glad this is coming to the end. It will be sitting next week because of SEMA but the plan is to tune it the following week.

Sent from my iPhone using Tapatalk

StillenZ84 · 10-29-2015, 12:14 PM

Good thing you are doing the FI flex plate because I just busted mine today. lol Pretty upset that Level 10 said I would be fine with the stock one. Taking it to make sure it is the flex plate and then ordering the FI flex plate from Kevin later today. fml

JWillis72 · 10-29-2015, 12:26 PM

F.I. Flex plate is beautiful, it a shame it will never be seen.

Sent from my iPhone using Tapatalk

10-16-2015, 01:25 PM	#2 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 19	No, flex plate is the same. Was told that for a flex plate to fail, most times there are failing parts around it and the upgraded torque converter Level 10 adds will help add stability to the flex plate. Not sure if they swap it out with the 1000whp kit or not __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

10-17-2015, 01:37 AM	#4 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3401	How much is that Tow Bar from F.I.? Is this a direct replacement of the bumper support bar? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

10-29-2015, 12:14 PM	#14 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 19	Good thing you are doing the FI flex plate because I just busted mine today. lol Pretty upset that Level 10 said I would be fine with the stock one. Taking it to make sure it is the flex plate and then ordering the FI flex plate from Kevin later today. fml __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
My new setup :)	Flushnismo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	30	06-29-2012 11:03 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Stillen Sway bars - 305 rear tires - setup?	FricFrac	Track / Autocross / Drifting / Dragstrip	2	02-15-2011 10:33 AM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 04:32 PM

10-16-2015, 12:47 PM	#1 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	Did you change out your flex plate? Sent from my iPhone using Tapatalk

10-16-2015, 01:31 PM	#3 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	No, they don't make one. Sent from my iPhone using Tapatalk

10-27-2015, 02:11 PM	#10 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	I will keep in touch. Sent from my iPhone using Tapatalk

10-28-2015, 04:19 PM	#11 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	Headers are in the car. Sent from my iPhone using Tapatalk

10-28-2015, 04:35 PM	#13 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	The F.I. Flex plate will be here tomorrow and so should the trans, I'm glad this is coming to the end. It will be sitting next week because of SEMA but the plan is to tune it the following week. Sent from my iPhone using Tapatalk

10-29-2015, 12:26 PM	#15 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 46	F.I. Flex plate is beautiful, it a shame it will never be seen. Sent from my iPhone using Tapatalk