Nissan 370Z Forum
Page 30 of 114 « First 202829 30 31324080 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Stillen Air to Air setup (http://www.the370z.com/forced-induction/104308-stillen-air-air-setup.html)

EVOHUNTER 09-12-2015 11:30 AM
good luck bro!

jwick 09-12-2015 02:41 PM
More than 3 hrs to tune?

Masterbeatty 09-12-2015 03:01 PM
Quote:
Originally Posted by jwick (Post 3307616)
More than 3 hrs to tune?
Patience young padawan, egger he is to post the results. :shakes head:

Im wondering as well!

TopgunZ 09-12-2015 03:39 PM
Well. The 500 Mark has yet to be hit. I made 490whp and 390tq. This was at 5500ft elevation. Up here I only got 10psi out of the blower. At sea level I would have see 13psi and would have been close to 550whp.

JWillis72 09-12-2015 04:18 PM
Congratulations! Thats with the Stillen 9 lb pulley and the 2.75 on the supercharger?

Z&I 09-12-2015 05:24 PM
Quote:
Originally Posted by TopgunZ (Post 3307655)
Well. The 500 Mark has yet to be hit. I made 490whp and 390tq. This was at 5500ft elevation. Up here I only got 10psi out of the blower. At sea level I would have see 13psi and would have been close to 550whp.
Pump Gas ???

TopgunZ 09-12-2015 05:44 PM
E85. 9 psi serp and 3.0" sc pulley. I have. 3.2 Jack shaft pulley at home. Which should be good for another 1.5psi. Then ill break 500.

JWillis72 09-12-2015 05:51 PM
No problems with belts slipping?


Sent from my iPhone using Tapatalk

TopgunZ 09-12-2015 07:52 PM
Zero belt slip. I have the anti slip brace. ��

TopgunZ 09-12-2015 07:54 PM
Edit... I meant 3.4" js pulley. The stock is 3.2.

JWillis72 09-12-2015 07:57 PM
Where did you get the bigger Jack shaft pulley? Seeing your numbers I'm realizing I need to send my 7AT to level 10.


Sent from my iPhone using Tapatalk

StillenZ84 09-12-2015 07:58 PM
Quote:
Originally Posted by TopgunZ (Post 3307739)
E85. 9 psi serp and 3.0" sc pulley. I have. 3.2 Jack shaft pulley at home. Which should be good for another 1.5psi. Then ill break 500.
Cant remember if you went with EcuTek?

StillenZ84 09-12-2015 08:00 PM
Quote:
Originally Posted by JWillis72 (Post 3307790)
Where did you get the bigger Jack shaft pulley? Seeing your numbers I'm realizing I need to send my 7AT to level 10.


Sent from my iPhone using Tapatalk
My Transmission is with them as we speak.

JWillis72 09-12-2015 08:23 PM
Stillen Air to Air setup
 
Really, when did you send it to them? I've been trying to make Sebring the first weekend of October but it's not looking like that will happen so when the pipes are done I'm thinking we will send them the trans. Seeing Tops numbers I know it's a mater of time and don't want to miss mare track days.


Sent from my iPhone using Tapatalk

StillenZ84 09-12-2015 08:37 PM
Quote:
Originally Posted by JWillis72 (Post 3307807)
Really, when did you send it to them? I've been trying to make Sebring the first weekend of October but it's not looking like that will happen so when the pipes are done I'm thinking we will send them the trans. Seeing Tops numbers I know it's a mater of time and don't want to miss mare track days.


Sent from my iPhone using Tapatalk
Sent it Thursday morning and they got it today. They said will take them 2-3 days starting Monday and it will be back on its way to me. Im in Oklahoma so the turn around might be a little quicker for you in FL.


All times are GMT -5. The time now is 07:37 PM.
Page 30 of 114 « First 202829 30 31324080 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2