Nissan 370Z Forum
Page 10 of 114 « First 89 10 11122060110 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Stillen Air to Air setup (http://www.the370z.com/forced-induction/104308-stillen-air-air-setup.html)

TopgunZ 08-01-2015 05:03 PM
Quote:
Originally Posted by JWillis72 (Post 3273535)
The pipe under the headlight, is that the intake/ filter pipe?


Sent from my iPhone using Tapatalk
Yes it is.

JWillis72 08-01-2015 05:10 PM
It looks like an easier way to do for my car so I don't have to move the trans cooler. We were planning to do the same thing.

TopgunZ 08-02-2015 01:22 AM
Can anyone please send me the part number to the short sc belt? I thought I had one but I dont. If you know the best place to buy it from too, that would be nice.

JWillis72 08-02-2015 09:15 AM
Is it for the 9 lb pulley from Stillen? If so they told me it was the same belt?

TopgunZ 08-02-2015 12:09 PM
No the short one on the sc pulley, back of plate.

JWillis72 08-02-2015 12:25 PM
Evohunter posted this in his build, is this what you are running?

For my setup next year

34 Tooth Count Jackshaft Pulley vortech - 4GR032-034

30 Tooth/35mm Supercharger Pulley votech - 4GR033-030

Gates belt Part number 5608MGT20 for the cog pulleys

StillenZ84 08-02-2015 04:06 PM
If not COG its Gates K080220

TopgunZ 08-02-2015 08:46 PM
Yeah need the 8 rib. Thanks Z84 .

TopgunZ 08-03-2015 10:29 AM
Quote:
Originally Posted by EVOHUNTER (Post 3272611)
Before you buy anything, Im going to work on the pulley setup tonight.

Ill tell you what works and what doesn't, then we can go from there.
Did you figure this out? Need to know if I should order that pulley today or not.

EVOHUNTER 08-04-2015 09:14 AM
Quote:
Originally Posted by TopgunZ (Post 3274553)
Did you figure this out? Need to know if I should order that pulley today or not.
Im putting the supercharger pulleys and belts on right now at work, ill let you know in a hour or so!

EVOHUNTER 08-04-2015 10:54 AM
Okay, everything works.

2.75" vortech pulley on supercharger - JACKSHAFT - stock sizing - stillen 9 psi on serp side.

For the tensioner pulley Napa Part # USA # 36112 NBH Canada # 36112 UNR

JWillis72 08-04-2015 11:01 AM
Do you have a part number for the 2.75" supercharger pulley?

EVOHUNTER 08-04-2015 11:16 AM
Quote:
Originally Posted by jwillis72 (Post 3275698)
do you have a part number for the 2.75" supercharger pulley?
vortech # 2a038-275

LINK BELOW FOR TENSIONER PULLEY

http://www.napaonline.com/Catalog/Ca...112_0338248387

JWillis72 08-04-2015 11:17 AM
Your the best! Thank you!

TopgunZ 08-04-2015 01:22 PM
Quote:
Originally Posted by EVOHUNTER (Post 3275690)
Okay, everything works.

2.75" vortech pulley on supercharger - JACKSHAFT - stock sizing - stillen 9 psi on serp side.

For the tensioner pulley Napa Part # USA # 36112 NBH Canada # 36112 UNR
What is stock size on that jackshaft pulley?


All times are GMT -5. The time now is 08:57 PM.
Page 10 of 114 « First 89 10 11122060110 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2