EVO-R 370Z Rear Diffuser

happytheman · 02-15-2012, 03:40 PM

Those of you with the EVO-R diffuser, can you tell me if the price was smooth and bubble free when you got it? Let me know, thanks.

ShockWave · 04-08-2012, 08:58 PM

My EVO-R CF Rear Diffuser have HUGE gaps on both sides. any know how to fix it? Fitment sucks with this diffuser!!

happytheman · 04-08-2012, 11:06 PM

You really have to work the piece to get in in place, then remove the backing on the 3M tape while you're holding it in place on both sides.

LakeShow · 04-08-2012, 11:10 PM

Quote:

Originally Posted by happytheman

You really have to work the piece to get in in place, then remove the backing on the 3M tape while you're holding it in place on both sides.

Does it rub or touch the bumper? Or does the tape give good separation so it doesn't scratch or something?

happytheman · 04-08-2012, 11:16 PM

Not that I recall. I'll have to check it tomorrow morning for you.

EVOR · 04-08-2012, 11:26 PM

remember the edge of the diffuser does not go over the inner lining of the bumper lining. Bumper lining is the shape of diffuser on the rear bumper. Hope this helps.

ShockWave · 04-09-2012, 08:30 AM

i'll take pics and post later. maybe someone can help!

ShockWave · 04-09-2012, 08:45 AM

ShockWave · 04-09-2012, 02:59 PM

did i install it wrong?

anthonyy · 04-09-2012, 03:44 PM

Quote:

Originally Posted by ShockWave

did i install it wrong?

Did you use screws to secure it in?

happytheman · 04-09-2012, 04:33 PM

Shockwave - imm gonna be honest, nobody is going to notice that except you. I do wonder though as well as anthonyy if you used the screws at each end to secure?

ShockWave · 04-09-2012, 06:32 PM

I used 3 screws. one on each end and 1 in the middle.

LakeShow · 04-10-2012, 12:09 AM

Shockwave good pics, really shows the detail. The edges seem fine, not noticeable unless you really stare at it.

370rossa · 04-17-2012, 08:00 PM

I have the Invidia Gemini exhaust and when I put my diffuser up to the bumper to check fitment before installing I noticed the diffuser touches the exhaust. Anyone have this problem or have any ideas what to do to get the exhaust to not touch? Only thing I thought of was getting longer rubber exhaust hangers but I haven't had any luck finding any.

happytheman · 04-17-2012, 08:17 PM

Ok, for my install it took one nut (14mm I believe), measuring ~1/4" in thickness per side between the frame and the bracket that holds the exhaust on in back to bring the exhaust tips down for proper clearance of the Evo-R Diffuser! Easy Peasey!

02-15-2012, 03:40 PM	#481 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Those of you with the EVO-R diffuser, can you tell me if the price was smooth and bubble free when you got it? Let me know, thanks. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-08-2012, 11:06 PM	#483 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	You really have to work the piece to get in in place, then remove the backing on the 3M tape while you're holding it in place on both sides. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-08-2012, 11:16 PM	#485 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Not that I recall. I'll have to check it tomorrow morning for you. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-08-2012, 11:26 PM	#486 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	remember the edge of the diffuser does not go over the inner lining of the bumper lining. Bumper lining is the shape of diffuser on the rear bumper. Hope this helps. __________________ WWW.EVO-R.NET

04-09-2012, 04:33 PM	#491 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Shockwave - imm gonna be honest, nobody is going to notice that except you. I do wonder though as well as anthonyy if you used the screws at each end to secure? __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

04-08-2012, 08:58 PM	#482 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	My EVO-R CF Rear Diffuser have HUGE gaps on both sides. any know how to fix it? Fitment sucks with this diffuser!!

04-09-2012, 08:30 AM	#487 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	i'll take pics and post later. maybe someone can help!

04-09-2012, 02:59 PM	#489 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	did i install it wrong?

04-09-2012, 06:32 PM	#492 (permalink)
ShockWave Enthusiast Member Join Date: Dec 2011 Location: houston Posts: 303 Drives: 350z Rep Power: 13	I used 3 screws. one on each end and 1 in the middle.

04-10-2012, 12:09 AM	#493 (permalink)
LakeShow A True Z Fanatic Join Date: Dec 2010 Location: L.I., NY Posts: 5,307 Drives: Everything Rep Power: 25	Shockwave good pics, really shows the detail. The edges seem fine, not noticeable unless you really stare at it. __________________ \|2013 Audi S4\|Ibis White/Black\|S-Tronic P+\| \|2013 370z\|PearlWhite/Persimmon\|Touring/Sport/Nav\|F.I. CBE 18" CF\| \|Sold\|2011 370z\|Gun Metallic\|Touring/Sport/Nav\|

04-17-2012, 08:00 PM	#494 (permalink)
370rossa Base Member Join Date: Aug 2011 Location: Ohio Posts: 2 Drives: 09 Nissan 370Z Sport Rep Power: 13	I have the Invidia Gemini exhaust and when I put my diffuser up to the bumper to check fitment before installing I noticed the diffuser touches the exhaust. Anyone have this problem or have any ideas what to do to get the exhaust to not touch? Only thing I thought of was getting longer rubber exhaust hangers but I haven't had any luck finding any.

04-17-2012, 08:17 PM	#495 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Ok, for my install it took one nut (14mm I believe), measuring ~1/4" in thickness per side between the frame and the bracket that holds the exhaust on in back to bring the exhaust tips down for proper clearance of the Evo-R Diffuser! Easy Peasey! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil change, Jack stands or ramps with diffuser?	spearfish25	Nissan 370Z General Discussions	31	08-10-2010 08:38 PM
Name this rear diffuser!	JoeD	Exterior & Interior	13	05-22-2010 07:45 PM
rear diffuser	jrmlk	Exterior & Interior	5	08-20-2009 09:58 PM
k40 calibre laser diffuser and detector.	dahbour	The Lounge (Off Topic)	2	08-17-2009 03:16 PM
Rear Diffuser 370Z	355890	Exterior & Interior	9	07-01-2009 08:17 PM