Amuse Tower Brace

kenhdcgov · 09-29-2014, 01:59 PM

Quote:

Originally Posted by Wiggins3377

its a great piece that's for sure. great piece of JDM art here.

No argument from me! It belongs in a church! It's sweet!

nomodsjk · 09-29-2014, 02:15 PM

What we're saying is given an unforseen "accident" your harness will cause more damage to you than what we feel you're expecting. If you are using a 4 point you can potentially slide forward with a tremendous amount of force causing paralysis or an unwanted sex change. Andrew (De.point50) was just telling me about a 5 point harness that has a break away function that is more properly suited for your application. While they are more expensive it's a lot safer

Chuck33079 · 09-29-2014, 02:19 PM

Quote:

Originally Posted by nomodsjk

What we're saying is given an unforseen "accident" your harness will cause more damage to you than what we feel you're expecting. If you are using a 4 point you can potentially slide forward with a tremendous amount of force causing paralysis or an unwanted sex change. Andrew (De.point50) was just telling me about a 5 point harness that has a break away function that is more properly suited for your application. While they are more expensive it's a lot safer

My concern is the fact the bar is mounted to the chassis with a few weakass bolts. I think in an accident the entire bar would become a missile, guided by the harness right into the back of your head. It is not mounted securely.

nomodsjk · 09-29-2014, 02:25 PM

That is a great point

kenhdcgov · 09-29-2014, 03:29 PM

Quote:

Originally Posted by Chuck33079

OP, no matter how secure it "feels", it is not designed to hold up to the massive forces applied in an accident. No matter how good the harness is, it will not help when the harness bar gets ripped off its mountings. You will die, or worse, live and be crippled.

Taking the chance is just plain retarded. Full roll cage with the harness or stock belts. Those are your safe options.

The stock belts are still there and useable. I just feel far more secure with the harness. There will be no accidents. I have had just two majors both probably
before you were born. Neither were my fault. And I will not have another. Trust me on that. On a motorcycle is another story and I don't ride as I did years ago. My shinny side will remain up and my dirty side shall always remain down. Nonetheless, your comments are appreciated and noted. Us
retards shall always survive, my friend. LOL.

DEpointfive0 · 09-29-2014, 03:31 PM

Quote:

Originally Posted by nomodsjk

What we're saying is given an unforseen "accident" your harness will cause more damage to you than what we feel you're expecting. If you are using a 4 point you can potentially slide forward with a tremendous amount of force causing paralysis or an unwanted sex change. Andrew (De.point50) was just telling me about a 5 point harness that has a break away function that is more properly suited for your application. While they are more expensive it's a lot safer

4 point with a breakaway. You don't need the breakaway with a 5 point

kenhdcgov · 09-29-2014, 03:33 PM

Quote:

Originally Posted by Chuck33079

My concern is the fact the bar is mounted to the chassis with a few weakass bolts. I think in an accident the entire bar would become a missile, guided by the harness right into the back of your head. It is not mounted securely.

And if by some unfortunate happenstance, my number comes up and I surfer the consequences, you guys will be the first that I will surely say, "you told me so"! Fair enough??

DEpointfive0 · 09-29-2014, 03:35 PM

Quote:

Originally Posted by kenhdcgov

The stock belts are still there and useable. I just feel far more secure with the harness. There will be no accidents. I have had just two majors both probably
before you were born. Neither were my fault. And I will not have another. Trust me on that. On a motorcycle is another story and I don't ride as I did years ago. My shinny side will remain up and my dirty side shall always remain down. Nonetheless, your comments are appreciated and noted. Us
retards shall always survive, my friend. LOL.

Ummmmmmmmmm... So... Your car is never leaving your garage? Noted.

What I'm saying is that while the Amuse bar is beautiful, in any sort of accident, you're going to wish you didn't have that thing. It's held in by the OEM mounts and is held in with OEM hardware. And the bar itself is held on the it's mounts WITH HOSE CLAMPS... Oh, and the bar is made out of really thin titanium... So it's going to crumple like the titanium can it is.

Chuck33079 · 09-29-2014, 03:39 PM

Quote:

Originally Posted by kenhdcgov

The stock belts are still there and useable. I just feel far more secure with the harness. There will be no accidents. I have had just two majors both probably
before you were born. Neither were my fault. And I will not have another. Trust me on that. On a motorcycle is another story and I don't ride as I did years ago. My shinny side will remain up and my dirty side shall always remain down. Nonetheless, your comments are appreciated and noted. Us
retards shall always survive, my friend. LOL.

One, you don't get to pick when you have accidents. It's not always in your control.

And you have no idea when I was born, so you're talking out your ***. If you're older than I am, you're in your 40s and have no right to be as dumb as your actions seem to suggest.

And any passenger with you is at risk too, since that bar will likely take them out too. It's a sweet piece, it's just for show.

DEpointfive0 · 09-29-2014, 03:40 PM

Aaaaaannnnnnnnnnd

/thread

kenhdcgov · 09-29-2014, 03:58 PM

Quote:

Originally Posted by DEpointfive0

Ummmmmmmmmm... So... Your car is never leaving your garage? Noted.

What I'm saying is that while the Amuse bar is beautiful, in any sort of accident, you're going to wish you didn't have that thing. It's held in by the OEM mounts and is held in with OEM hardware. And the bar itself is held on the it's mounts WITH HOSE CLAMPS... Oh, and the bar is made out of really thin titanium... So it's going to crumple like the titanium can it is.

It's not thin titanium, it's reinforced because of the harness bolts. The bar is bolted in. No hose claps allowed! I will be safe. I promise that you will not have to either attend my funeral or visit me in the hospital, ok? LOL Peace out, my Z Brother. I am going home.

kenhdcgov · 09-29-2014, 04:01 PM

Quote:

Originally Posted by Chuck33079

One, you don't get to pick when you have accidents. It's not always in your control.

And you have no idea when I was born, so you're talking out your ***. If you're older than I am, you're in your 40s and have no right to be as dumb as your actions seem to suggest.

And any passenger with you is at risk too, since that bar will likely take them out too. It's a sweet piece, it's just for show.

No, I wish I were still in my 40's, if only. I am old enough to be your granddad! My actions are result of being a track racer and far more, my friend. When you are my age, every day is a chance and you take them as they come.

DEpointfive0 · 09-29-2014, 04:01 PM

Quote:

Originally Posted by kenhdcgov

It's not thin titanium, it's reinforced because of the harness bolts. The bar is bolted in. No hose claps allowed! I will be safe. I promise that you will not have to either attend my funeral or visit me in the hospital, ok? LOL Peace out, my Z Brother. I am going home.

Ummmmmm... It's thin as shít titanium...

That outer titanium uses hose clamps to hold the end pieces...

The end pieces use the OEMS mounts that hold the OEMS bars in...

There is no debate here. Those are the facts...

DEpointfive0 · 09-29-2014, 04:03 PM

Quote:

Originally Posted by kenhdcgov

No, I wish I were still in my 40's, if only. I am old enough to be your granddad! My actions are result of being a track racer and far more, my friend. When you are my age, every day is a chance and you take them as they come.

If you're saying your old enough that you don't give a **** that you die in your car because of your harness bar; no problem. Props to you.

Saying you WON'T get into an accident because you won't let it happen... Full retard

Chuck33079 · 09-29-2014, 04:03 PM

Quote:

Originally Posted by kenhdcgov

No, I wish I were still in my 40's, if only. I am old enough to be your granddad! My actions are result of being a track racer and far more, my friend. When you are my age, every day is a chance and you take them as they come.

Welp, good luck with all that. Don't allow any passengers in your car. That would be negligent and they would have a serious case against you. Or your estate. Unsubscribing.

09-29-2014, 03:40 PM	#25 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Aaaaaannnnnnnnnnd /thread nomodsjk likes this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Front Strut Tower Brace OEM	modme	Parts for sale (Private Classifieds)	8	08-03-2014 12:21 AM
Front Strut tower brace options???	bldg636	Engine & Drivetrain	28	02-18-2013 02:00 PM
strut tower brace material?	edub370	Exterior & Interior	12	09-22-2012 01:01 AM
WTB: OEM Strut tower brace	daisuke149	Wanted	7	10-27-2010 08:50 AM
WTB: OEM Nismo Strut Tower Brace	'10Anamoly	Wanted	0	07-13-2010 08:30 AM

09-29-2014, 02:15 PM	#17 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	What we're saying is given an unforseen "accident" your harness will cause more damage to you than what we feel you're expecting. If you are using a 4 point you can potentially slide forward with a tremendous amount of force causing paralysis or an unwanted sex change. Andrew (De.point50) was just telling me about a 5 point harness that has a break away function that is more properly suited for your application. While they are more expensive it's a lot safer

09-29-2014, 02:25 PM	#19 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	That is a great point