That stupid plastic lock rivet in trunk query

Limeybastard · 09-05-2014, 11:52 PM

I was checking my spare tire pressure and also installing some wheel lock nuts ( props to TreeSemdyZee he gave them to me ). The black foamy polystyrine on each side is held in place by one black plastic retainer. How the hell do these go back again, I tried pushing them in or screwing them in, they just pop back out.

Thanks.

KaienZ34 · 09-06-2014, 08:30 AM

I know the link is for the fog light. There are plenty of pics and info on getting the interior pieces from the hatch in and out.

DIY: of complete FOG LAMP install

SouthArk370Z · 09-06-2014, 09:18 AM

If you are talking about the plastic "pop-rivets" then you have probably broken one or more of the "fingers" and will need to replace the pop-rivet. You can find them at auto parts stores (I get them by the handful from my favorite body shop. Depending on what kind of mood they are in, I get them for $0.50-1.00 a piece).

If you are talking about something else, post a pic.

Limeybastard · 09-06-2014, 11:25 AM

Quote:

Originally Posted by SouthArk370Z

If you are talking about the plastic "pop-rivets" then you have probably broken one or more of the "fingers" and will need to replace the pop-rivet. You can find them at auto parts stores (I get them by the handful from my favorite body shop. Depending on what kind of mood they are in, I get them for $0.50-1.00 a piece).

If you are talking about something else, post a pic.

Thanks, the one I am talking about is only used in two places in the trunk.

One on either side of the spare wheel that holds the foam try down.

Image stolen for my Ozzie cousins..

Great write up of rear bumper removal also..

http://zclub.com.au/forums/index.php...ensor-install/

SouthArk370Z · 09-07-2014, 12:47 AM

I don't remember using any of those but my guess is that yours is worn or broken. Assuming they are generic fasteners, as with the pop-rivets, they shouldn't cost more than a few bucks at any auto parts store. Check the FSM and/or Courtesy Parts for drawings, Nissan part number, &c.

Limeybastard · 09-07-2014, 01:07 AM

Quote:

Originally Posted by SouthArk370Z

I don't remember using any of those but my guess is that yours is worn or broken. Assuming they are generic fasteners, as with the pop-rivets, they shouldn't cost more than a few bucks at any auto parts store. Check the FSM and/or Courtesy Parts for drawings, Nissan part number, &c.

Yeah, I probably broke a few plastic teeth inside of them. These rivets or whatever they are called were stock parts.

I will take one to autozone or something and see if I can get a replacement. thanks.

09-05-2014, 11:52 PM	#1 (permalink)
Limeybastard A True Z Fanatic Join Date: Apr 2014 Location: FL and London UK. Posts: 1,514 Drives: 2014 370Z Sport. Rep Power: 17	That stupid plastic lock rivet in trunk query I was checking my spare tire pressure and also installing some wheel lock nuts ( props to TreeSemdyZee he gave them to me ). The black foamy polystyrine on each side is held in place by one black plastic retainer. How the hell do these go back again, I tried pushing them in or screwing them in, they just pop back out. Thanks.

09-06-2014, 08:30 AM	#2 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I know the link is for the fog light. There are plenty of pics and info on getting the interior pieces from the hatch in and out. DIY: of complete FOG LAMP install __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

09-06-2014, 09:18 AM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	If you are talking about the plastic "pop-rivets" then you have probably broken one or more of the "fingers" and will need to replace the pop-rivet. You can find them at auto parts stores (I get them by the handful from my favorite body shop. Depending on what kind of mood they are in, I get them for $0.50-1.00 a piece). If you are talking about something else, post a pic. Limeybastard likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

09-07-2014, 12:47 AM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	I don't remember using any of those but my guess is that yours is worn or broken. Assuming they are generic fasteners, as with the pop-rivets, they shouldn't cost more than a few bucks at any auto parts store. Check the FSM and/or Courtesy Parts for drawings, Nissan part number, &c. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trunk lid lock and new spoiler	Thuegel1	Exterior & Interior	1	07-19-2013 07:08 AM
Plastic covers inside trunk, what are they for???	Kabestro	New 370Z Owner	3	09-12-2012 04:50 AM
N-Spec bumper query	Pheonix	Exterior & Interior	0	04-28-2012 05:00 PM
2 Seater Query	ludeakris7	Nissan 370Z General Discussions	47	12-12-2011 11:54 AM
just lost my stupid job today cuz of my stupid boss, and i just got my pw 370z	jookiyaya	The Lounge (Off Topic)	16	09-23-2009 09:53 PM