Just installed INGS carbon fiber lip. Check it out!

vividracing · 01-06-2015, 02:28 PM

Quote:

Originally Posted by Zbrah

I'm content

Well promise to let me know when you start getting that itch...you know the one, where your wallet is too fat to sit on. Feels like you're sitting on a rock and your back gets out of alignment. I have a cure for that.

jshare1 · 01-29-2015, 06:32 PM

as to pertaining to the front lip........ it will or will not fit a '14

vividracing · 02-13-2015, 10:29 AM

Bump!!!

vividracing · 03-12-2015, 12:12 PM

End of the week bump! Order yours today. Our test car in the pictures still has his on and it still looks amazing.

Joker_J · 03-13-2015, 09:26 AM

Same....if it fit the 2014 models I would get one ....

carlitos_370z · 03-13-2015, 09:28 AM

Quote:

Originally Posted by Joker_J

Same....if it fit the 2014 models I would get one ....

if you wanted you have to make it fit like I do with my SL Replica front lip hahha!!!

Joker_J · 03-13-2015, 09:37 AM

Quote:

Originally Posted by carlitos_370z

if you wanted you have to make it fit like I do with my SL Replica front lip hahha!!!

but i like my drl!!!

(substitute tears with puke haha)

carlitos_370z · 03-13-2015, 10:30 AM

Quote:

Originally Posted by Joker_J

but i like my drl!!!

(substitute tears with puke haha)

hahahahah! me to bro!!! I love my DRL

thats the reason cause I made my own lip using the SL replica lip from the 09-12

DSCN2973edited by carlitos_370z, on Flickr

You can do the same with the Ings+1 front lip if you find a FRP version

Joker_J · 03-13-2015, 10:33 AM

Quote:

Originally Posted by carlitos_370z

hahahahah! me to bro!!! I love my DRL

thats the reason cause I made my own lip using the SL replica lip from the 09-12

DSCN2973edited by carlitos_370z, on Flickr

You can do the same with the Ings+1 front lip if you find a FRP version

Too much work xD just sell me yours

ta-kid · 04-06-2015, 08:24 PM

Quote:

Originally Posted by carlitos_370z

hahahahah! me to bro!!! I love my DRL

thats the reason cause I made my own lip using the SL replica lip from the 09-12

DSCN2973edited by carlitos_370z, on Flickr

You can do the same with the Ings+1 front lip if you find a FRP version

So exactly what did you have to do to make it fit??Cut it a bit to get the proper curve or was it too short or too long?

jdmdrifter · 03-28-2015, 09:42 AM

why dont they make one for the 14

daveb91 · 03-28-2015, 12:05 PM

Quote:

Originally Posted by jdmdrifter

why dont they make one for the 14

Good f#cking question

vividracing · 03-31-2015, 07:15 PM

Quote:

Originally Posted by jdmdrifter

why dont they make one for the 14

I'm sure it's not because they hate the 2014 and up front bumper, it just changed shape and requires a new design. I have a message into INGS requesting information on if they are planning to release a front lip for the 14+.

Stay tuned, same bat time, same bat channel.

carlitos_370z · 04-01-2015, 05:33 AM

Quote:

Originally Posted by vividracing

I'm sure it's not because they hate the 2014 and up front bumper, it just changed shape and requires a new design. I have a message into INGS requesting information on if they are planning to release a front lip for the 14+.

Stay tuned, same bat time, same bat channel.

im in if they made one for the 13+ front bumper... im going to start saving

shadow85 · 05-07-2017, 03:12 AM

Quote:

Originally Posted by jdmdrifter

why dont they make one for the 14

Well I asked one of the official SunLine suppliers here in Australia to contact Sun Line in Japan. And apparantly they claimed they will make the SS lip for the 2013+ Zs. This was a few months ago, have no idea how legit that claim is or if they are even close to finishing it.

01-29-2015, 06:32 PM	#2 (permalink)
jshare1 Enthusiast Member Join Date: Aug 2014 Location: Hanover, MD Posts: 283 Drives: 14' 370Z Touring 6MT Rep Power: 16	as to pertaining to the front lip........ it will or will not fit a '14 Joker_J likes this. __________________ "only acceptable trades are turtles or beer"

02-13-2015, 10:29 AM	#3 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 39 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 40	Bump!!! __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

03-12-2015, 12:12 PM	#4 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 39 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 40	End of the week bump! Order yours today. Our test car in the pictures still has his on and it still looks amazing. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

03-13-2015, 09:26 AM	#5 (permalink)
Joker_J Track Member Join Date: Aug 2014 Location: The Ville, KY Posts: 580 Drives: 2014 NISSAN 370Z Rep Power: 14	Same....if it fit the 2014 models I would get one .... carlitos_370z likes this.

03-28-2015, 09:42 AM	#11 (permalink)
jdmdrifter Base Member Join Date: Mar 2014 Location: Los Angeles Posts: 8 Drives: 370z Rep Power: 12	why dont they make one for the 14 carlitos_370z and daveb91 like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Full Carbon Fiber 370z....CHECK!!!	Carbon_z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	51	08-16-2016 10:33 AM
FS: INGS+1 Front lip, Carbon Fiber Pod cover, EVO-R Diffuser etc	TheGreatOne	Canada	28	12-14-2014 09:57 AM
ings+1 carbon fiber side blades	jlo370z	Exterior & Interior	15	04-25-2014 07:04 AM
[WTB] INGs + 1 carbon fiber lip	Ni55anPat	Parts for sale (Private Classifieds)	3	07-11-2013 10:11 PM
[WTB] INGS+1 N-Spec Carbon Fiber Front Lip	pty370z	Parts for sale (Private Classifieds)	1	08-02-2012 07:52 PM