immobilizer not working!?

kz34wa · 06-07-2014, 09:56 AM

My immobilizer's battery was dead so i went to the shops to change for a new one. After putting the new battery in, the immobilizer doesn't work anymore.

Is there an immobilizer reset or something? Nothing happens when i press lock or unlock. I have to use the key to lock it manually and put the immobilizer in the hole to be able to start the car.

Trips · 06-07-2014, 10:21 AM

You might have just replaced it with an expired New battery.

It happens since there is NO way really to test the shelf life before buying them.

Have you tried using another NEW battery or the spare remote?

kz34wa · 06-07-2014, 10:53 AM

I'll try it again with another battery.

kz34wa · 06-16-2014, 07:11 AM

I have tried changing the battery and the immobilizer is still not working?

Does anyone know why it does not work? Do i need to pair them up again through Nissan?

SouthArk370Z · 06-16-2014, 07:29 AM

I replaced the battery in one of my fobs and didn't have to go through any reset procedure - just changed the battery and it worked.
Check and make sure the battery is installed correctly, positive-to-positive/negative-to-negative.
Look for any corrosion or other material on the contacts - gently clean with a rubber pencil eraser if needed. Clean the battery - buffing with some denim usually works or use the eraser.

Zteve · 06-16-2014, 11:40 AM

did you do any audio work or work where you had to take the center column near the cupholder off? if so check to make sure the brain module inside the car is plugged in. if that is plugged in then try another battery. this happened to someone else on the forum and that was the culprit

No Key error

kenchan · 06-16-2014, 11:43 AM

immobilizer not working? wat?

Zteve · 06-16-2014, 01:22 PM

probably australian for key fob

kz34wa · 06-16-2014, 07:20 PM

Quote:

Originally Posted by Zteve

did you do any audio work or work where you had to take the center column near the cupholder off? if so check to make sure the brain module inside the car is plugged in. if that is plugged in then try another battery. this happened to someone else on the forum and that was the culprit

No Key error

I haven't touched anything in the interior.

The story is that my immobilizer ran out of batteries. When i replaced the battery, it still doesn't work. Yet i still have no clue what is wrong.

I might have to take it to Nissan

Fountainhead · 06-16-2014, 09:52 PM

Since you put the fob in the keygina on the left hand side of the console, the keygina is designed to power the fob in case of no power/bad battery. It has to be the battery or battery contacts.

Fountainhead · 06-16-2014, 09:57 PM

Yeah there is a near field charging coil on the keyfob pcba. It wasn't exactly cheap to go to the trouble to make the fob wirelessly powered when battery went dead. Lots of NRE on that little bugger to make it so compact and separate the two frequencies, one for charging and one for transmission to allow starting. Really cool though.

kz34wa · 06-17-2014, 02:48 AM

i feel so stupid right now.... The battery was put in the wrong side.... LOL

Major fail to myself lol.

06-07-2014, 09:56 AM	#1 (permalink)
kz34wa Base Member Join Date: Dec 2013 Location: Australia Posts: 60 Drives: 10 370z GM 7AT Rep Power: 11	immobilizer not working!? My immobilizer's battery was dead so i went to the shops to change for a new one. After putting the new battery in, the immobilizer doesn't work anymore. Is there an immobilizer reset or something? Nothing happens when i press lock or unlock. I have to use the key to lock it manually and put the immobilizer in the hole to be able to start the car.

06-07-2014, 10:21 AM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	You might have just replaced it with an expired New battery. It happens since there is NO way really to test the shelf life before buying them. Have you tried using another NEW battery or the spare remote? __________________

06-16-2014, 07:29 AM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	I replaced the battery in one of my fobs and didn't have to go through any reset procedure - just changed the battery and it worked. Check and make sure the battery is installed correctly, positive-to-positive/negative-to-negative. Look for any corrosion or other material on the contacts - gently clean with a rubber pencil eraser if needed. Clean the battery - buffing with some denim usually works or use the eraser. DEpointfive0 likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

06-16-2014, 11:40 AM	#6 (permalink)
Zteve Enthusiast Member Join Date: Jul 2013 Location: Clarksville TN Posts: 348 Drives: 2013 370Z MB w/Sport Rep Power: 3368	did you do any audio work or work where you had to take the center column near the cupholder off? if so check to make sure the brain module inside the car is plugged in. if that is plugged in then try another battery. this happened to someone else on the forum and that was the culprit No Key error __________________ 2013 Midnight Blue 370Z Base w/Sport Package

06-16-2014, 01:22 PM	#8 (permalink)
Zteve Enthusiast Member Join Date: Jul 2013 Location: Clarksville TN Posts: 348 Drives: 2013 370Z MB w/Sport Rep Power: 3368	probably australian for key fob __________________ 2013 Midnight Blue 370Z Base w/Sport Package

06-07-2014, 10:53 AM	#3 (permalink)
kz34wa Base Member Join Date: Dec 2013 Location: Australia Posts: 60 Drives: 10 370z GM 7AT Rep Power: 11	I'll try it again with another battery.

06-16-2014, 07:11 AM	#4 (permalink)
kz34wa Base Member Join Date: Dec 2013 Location: Australia Posts: 60 Drives: 10 370z GM 7AT Rep Power: 11	I have tried changing the battery and the immobilizer is still not working? Does anyone know why it does not work? Do i need to pair them up again through Nissan?

06-16-2014, 11:43 AM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	immobilizer not working? wat?

06-16-2014, 09:52 PM	#10 (permalink)
Fountainhead Track Member Join Date: Feb 2013 Location: FL Posts: 834 Drives: 2019 Civic Type R Rep Power: 14	Since you put the fob in the keygina on the left hand side of the console, the keygina is designed to power the fob in case of no power/bad battery. It has to be the battery or battery contacts. SouthArk370Z likes this.

06-16-2014, 09:57 PM	#11 (permalink)
Fountainhead Track Member Join Date: Feb 2013 Location: FL Posts: 834 Drives: 2019 Civic Type R Rep Power: 14	Yeah there is a near field charging coil on the keyfob pcba. It wasn't exactly cheap to go to the trouble to make the fob wirelessly powered when battery went dead. Lots of NRE on that little bugger to make it so compact and separate the two frequencies, one for charging and one for transmission to allow starting. Really cool though.

06-17-2014, 02:48 AM	#12 (permalink)
kz34wa Base Member Join Date: Dec 2013 Location: Australia Posts: 60 Drives: 10 370z GM 7AT Rep Power: 11	i feel so stupid right now.... The battery was put in the wrong side.... LOL Major fail to myself lol.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One key fob not working?	kittens	Nissan 370Z General Discussions	3	10-23-2013 03:12 PM
Reactivate Immobilizer System?	Damonox	Exterior & Interior	23	08-23-2013 09:36 PM
Is Rev Match Working Right	Jimc	Nissan 370Z General Discussions	9	06-03-2013 07:52 PM
Help!!!! Fog Lamp, not working.	lastblueprint	Exterior & Interior	8	05-07-2010 10:09 PM
So I was working on the Z today	>135I	Nissan 370Z General Discussions	22	04-19-2010 11:27 PM