TWM Performance Shift Knob

cruzthepug · 05-16-2014, 07:19 PM

I had been thinking about getting a short shifter but after some research I opted just to try a weighted shift knob. Ordered a Big Type R from TWM Performance. Brown truck delivered it this afternoon. I'll take it out for some testing tomorrow.

zefaulter · 05-17-2014, 11:23 PM

kenchan · 05-18-2014, 02:31 PM

You need a ballcock shank washer or some premade finisher to finish it off.
Looks unfinished without it.

cruzthepug · 05-28-2014, 02:49 PM

Ordered this finishing ring from Zeetoys.com and it came in the raw aluminum finish but wanted to match the knob. Took it to work today, scuffed sanded, wash primer and a finish coat of Polane color matched to the knob. I'll install this evening when I get home.

Sent from my iPhone using Tapatalk

kenchan · 05-28-2014, 04:23 PM

might suggest putting a piece of nylon between the finisher and your biggie type-r so that your paint doesnt scratch off when you tighten down the knob.

cruzthepug · 05-28-2014, 05:55 PM

Not real sure which one I like better, I kinda like it without the ring

Sent from my iPhone using Tapatalk

jwick · 05-28-2014, 06:03 PM

Quote:

Originally Posted by cruzthepug

Not real sure which one I like better, I kinda like it without the ring

Sent from my iPhone using Tapatalk

Middle one! That's the one I'm going to when I stop spending money on the turbo

madwi · 05-28-2014, 06:10 PM

Quote:

Originally Posted by cruzthepug

Not real sure which one I like better, I kinda like it without the ring
[/IMG]

Sent from my iPhone using Tapatalk

I actually like it better without the ring on it.

kenchan · 05-28-2014, 06:16 PM

my modded ballcock shank washer was like $2 and has a much lower profile and clean finish.

too bad no more picts available. only one pict in my albums page.

madwi · 05-28-2014, 06:19 PM

Yeah if that spacer had a lower profile I would like it.

kenchan · 05-28-2014, 06:23 PM

Quote:

Originally Posted by madwi

Yeah if that spacer had a lower profile I would like it.

then yah, you would like my setup.

kenchan · 05-28-2014, 06:33 PM

here you go...

onzedge · 05-28-2014, 06:43 PM

Quote:

Originally Posted by kenchan

here you go...

madwi · 05-28-2014, 06:55 PM

Quote:

Originally Posted by kenchan

here you go...

I like that.

Got_Z · 05-29-2014, 08:11 AM

Had the same issue with my shift knob OP. I went out to Home Depot and bought this and mine sits perfectly flush. Use this:

http://m.homedepot.com/p/Fluidmaster..._sku=202252982

-M-

05-16-2014, 07:19 PM	#1 (permalink)
cruzthepug Base Member Join Date: Feb 2014 Location: Huntsville, AL Posts: 245 Drives: 2014 370Z Touring Rep Power: 11	TWM Performance Shift Knob I had been thinking about getting a short shifter but after some research I opted just to try a weighted shift knob. Ordered a Big Type R from TWM Performance. Brown truck delivered it this afternoon. I'll take it out for some testing tomorrow. MX52Z, zefaulter and equalme like this. Last edited by cruzthepug; 05-28-2014 at 06:04 PM.

05-28-2014, 02:49 PM	#4 (permalink)
cruzthepug Base Member Join Date: Feb 2014 Location: Huntsville, AL Posts: 245 Drives: 2014 370Z Touring Rep Power: 11	Ordered this finishing ring from Zeetoys.com and it came in the raw aluminum finish but wanted to match the knob. Took it to work today, scuffed sanded, wash primer and a finish coat of Polane color matched to the knob. I'll install this evening when I get home. Sent from my iPhone using Tapatalk __________________ Ark Performance / Eibach / Forgestar (CF10's Daily, F14's Race)/ Project Kics / K&N / Z1 / TWM Performance / RJM Performance / Koni / Hawk Performance

05-28-2014, 05:55 PM	#6 (permalink)
cruzthepug Base Member Join Date: Feb 2014 Location: Huntsville, AL Posts: 245 Drives: 2014 370Z Touring Rep Power: 11	Not real sure which one I like better, I kinda like it without the ring Sent from my iPhone using Tapatalk __________________ Ark Performance / Eibach / Forgestar (CF10's Daily, F14's Race)/ Project Kics / K&N / Z1 / TWM Performance / RJM Performance / Koni / Hawk Performance

05-28-2014, 06:19 PM	#10 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	Yeah if that spacer had a lower profile I would like it. kenchan likes this.

05-28-2014, 06:33 PM	#12 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	here you go... onzedge likes this.

05-17-2014, 11:23 PM	#2 (permalink)
zefaulter A True Z Fanatic Join Date: Jan 2013 Location: Toronto, Canada Posts: 1,983 Drives: 40th 370Z Rep Power: 27

05-18-2014, 02:31 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	You need a ballcock shank washer or some premade finisher to finish it off. Looks unfinished without it.

05-28-2014, 04:23 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	might suggest putting a piece of nylon between the finisher and your biggie type-r so that your paint doesnt scratch off when you tighten down the knob.

05-28-2014, 06:16 PM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	my modded ballcock shank washer was like $2 and has a much lower profile and clean finish. too bad no more picts available. only one pict in my albums page.

05-29-2014, 08:11 AM	#15 (permalink)
Got_Z Track Member Join Date: Oct 2013 Location: Dallas Posts: 582 Drives: 11 Sport/Touring 6MT Rep Power: 12	Had the same issue with my shift knob OP. I went out to Home Depot and bought this and mine sits perfectly flush. Use this: http://m.homedepot.com/p/Fluidmaster..._sku=202252982 -M- __________________ Insta: www.instagram.com/mb4393/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] TWM Performance Type-R (Graphite) shift knob.	Arrvaxx	Parts for sale (Private Classifieds)	14	10-26-2013 07:04 PM
[FOR SALE] Tmw performance shift knob	TOPHER9425	Parts for sale (Private Classifieds)	3	10-26-2013 10:36 AM
[FOR SALE] Forged Performance Shift Knob (Miami)	fl350z	Parts for sale (Private Classifieds)	18	10-11-2013 06:14 AM
[FOR SALE] Forged Performance CNC shift knob & LED bulbs	98intrigue	Parts for sale (Private Classifieds)	14	04-16-2012 06:16 AM
+ Forged Performance Shift Knob (Installed) +	batman_4	Exterior & Interior	16	04-13-2009 02:28 PM