TopSecret Style Diffuser for 350z retro'd for the 370z

EVOHUNTER · 04-19-2014, 05:36 PM

Ok guys, Finally got time to do the final mount process, i was able to fab up brackets, from aluminum flats from hope depot, Cost was under 13 bucks, the original brackets that mount up to the outer part of your fenders can still be used. Ill have a full DIY up soon, i took pictures along the way. Note, the kit would fit perfect if there wasn't the fog/brake light. So if someone goes to the extra step, and completely removes this assembly. For me, i have a amuse kit, so putting the time and labour just isn't worth my time. This diffuser will be going on my amuse kit in 5 weeks or so, the foglight has been shaved off completely. Ill have pictures up down the road with the amuse kit. I should have pictures up of this one completely done by tomorrow night! But it works, and doesn't look to bad on the stock bumper.

Just wondering what you guys think about the vortex tubes this diffuser comes with, I'm not sure if ill use them.

Masterbeatty · 04-19-2014, 06:30 PM

What you could do is cut out the fog light. Then put some fiberglass across the hole, smoothe it out with bondo. Then either plastidip that whole bottom part or wrap it with vinyl or paint it. Then it wouldn't look so awkward. But it looks pretty nice reguardless.

FairladyZ10PG · 04-20-2014, 12:09 AM

Looks like it fits pretty well except the fog light as you mentioned. Nice work. I'm waiting to see the results on the amuse bumper as well. Mine should be on in about 2 weeks

RyanWest · 04-20-2014, 02:48 AM

looks legit to me. I wouldnt even mind leaving the third light on... Cant wait for the DIY thread to come up

simota1 · 04-20-2014, 03:15 AM

i just died a little that look absolutely beautiful

kz34wa · 04-20-2014, 09:22 AM

more pictures please!

I want to see a further shot of this diffuser

madwi · 04-20-2014, 09:31 AM

Quote:

Originally Posted by EVOHUNTER

konsta · 04-20-2014, 09:59 AM

wow, cant wait to see that on the amuse ! !

EVOHUNTER · 04-20-2014, 01:49 PM

Thanks guys, i should have the complete mounting done today! The Full DIY should be up in the next week or so, very easy process. I have all the Part #'s for the bolts, aluminum flats, and a few misc stuff. These part numbers are from HomeDepot, So its as easy as going there and buying the stuff. Socket set, drill, drill bits and torch (to bend the aluminum so it won't break) are all the tools needed. It can all be done on the jack stands, with the back wheels off. I had to use a hoist to fab the brackets, it was near impossible to get the proper measurements without the hoist. Ill get you guys some more pictures asap!
heres some more farther shots, as requested, these where from yesterday. @kz34wa

Vichtz · 05-03-2014, 12:17 PM

Why can I not see any of these pictures?!

konsta · 05-03-2014, 01:16 PM

I think that diffuser combined with the shine auto rear spats would look killer, would love to see someone try that or photoshop it

synolimit · 05-03-2014, 02:46 PM

All to dark of a car and pics to wrap my head around it.

synolimit · 05-03-2014, 02:51 PM

Can you find out the angle of attack under the muffler tips and if you add the little side things on? The sides look like a better angle but the mufflers almost look flat so kinda pointless to be a real diffuser.

Kayzee · 05-08-2014, 02:30 AM

in dire need of an update, i cannot stop drooling

shika805 · 05-09-2014, 12:51 AM

dope.

04-19-2014, 05:36 PM	#31 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Ok guys, Finally got time to do the final mount process, i was able to fab up brackets, from aluminum flats from hope depot, Cost was under 13 bucks, the original brackets that mount up to the outer part of your fenders can still be used. Ill have a full DIY up soon, i took pictures along the way. Note, the kit would fit perfect if there wasn't the fog/brake light. So if someone goes to the extra step, and completely removes this assembly. For me, i have a amuse kit, so putting the time and labour just isn't worth my time. This diffuser will be going on my amuse kit in 5 weeks or so, the foglight has been shaved off completely. Ill have pictures up down the road with the amuse kit. I should have pictures up of this one completely done by tomorrow night! But it works, and doesn't look to bad on the stock bumper. Just wondering what you guys think about the vortex tubes this diffuser comes with, I'm not sure if ill use them. kenchan, KaienZ34, FairladyZ10PG and 3 others like this. __________________ Last edited by EVOHUNTER; 04-19-2014 at 05:39 PM.

04-19-2014, 06:30 PM	#32 (permalink)
Masterbeatty A True Z Fanatic Join Date: May 2012 Location: Whales Vagina Posts: 4,586 Drives: the speed limit... Rep Power: 122866	What you could do is cut out the fog light. Then put some fiberglass across the hole, smoothe it out with bondo. Then either plastidip that whole bottom part or wrap it with vinyl or paint it. Then it wouldn't look so awkward. But it looks pretty nice reguardless. __________________ 2011 MB 6MT Masterbeatty journal

04-20-2014, 12:09 AM	#33 (permalink)
FairladyZ10PG A True Z Fanatic Join Date: Aug 2010 Location: SoCal-IE Posts: 1,890 Drives: PGraphite m6 Rep Power: 254	Looks like it fits pretty well except the fog light as you mentioned. Nice work. I'm waiting to see the results on the amuse bumper as well. Mine should be on in about 2 weeks Amuse370z likes this. __________________ ///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER

04-20-2014, 03:15 AM	#35 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 404	i just died a little that look absolutely beautiful __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

04-20-2014, 01:49 PM	#39 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Thanks guys, i should have the complete mounting done today! The Full DIY should be up in the next week or so, very easy process. I have all the Part #'s for the bolts, aluminum flats, and a few misc stuff. These part numbers are from HomeDepot, So its as easy as going there and buying the stuff. Socket set, drill, drill bits and torch (to bend the aluminum so it won't break) are all the tools needed. It can all be done on the jack stands, with the back wheels off. I had to use a hoist to fab the brackets, it was near impossible to get the proper measurements without the hoist. Ill get you guys some more pictures asap! heres some more farther shots, as requested, these where from yesterday. @kz34wa axio, FairladyZ10PG, NickTurnon and 4 others like this. __________________ Last edited by EVOHUNTER; 04-20-2014 at 01:58 PM.

04-20-2014, 02:48 AM	#34 (permalink)
RyanWest Track Member Join Date: Jan 2012 Location: Tamp, Fl Posts: 714 Drives: 2009 Nissan Rep Power: 33	looks legit to me. I wouldnt even mind leaving the third light on... Cant wait for the DIY thread to come up

04-20-2014, 09:22 AM	#36 (permalink)
kz34wa Base Member Join Date: Dec 2013 Location: Australia Posts: 60 Drives: 10 370z GM 7AT Rep Power: 11	more pictures please! I want to see a further shot of this diffuser

04-20-2014, 09:59 AM	#38 (permalink)
konsta Base Member Join Date: Dec 2013 Location: Dubai Posts: 156 Drives: 370z Rep Power: 296	wow, cant wait to see that on the amuse ! !

05-03-2014, 12:17 PM	#40 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 13	Why can I not see any of these pictures?! __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

05-03-2014, 01:16 PM	#41 (permalink)
konsta Base Member Join Date: Dec 2013 Location: Dubai Posts: 156 Drives: 370z Rep Power: 296	I think that diffuser combined with the shine auto rear spats would look killer, would love to see someone try that or photoshop it

05-03-2014, 02:46 PM	#42 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	All to dark of a car and pics to wrap my head around it. __________________ 13 370z-

05-03-2014, 02:51 PM	#43 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Can you find out the angle of attack under the muffler tips and if you add the little side things on? The sides look like a better angle but the mufflers almost look flat so kinda pointless to be a real diffuser. __________________ 13 370z-

05-08-2014, 02:30 AM	#44 (permalink)
Kayzee Enthusiast Member Join Date: Jul 2012 Location: New York, NYC Posts: 361 Drives: around Rep Power: 12	in dire need of an update, i cannot stop drooling axio likes this. __________________ 2010 Sport, Magnetic Black Top Speed Pro 1 CBE - Swift Spec R - Stillen Splitter - 35% Tint - Tinted tails - 6k HID -ES113 20x10 20x11

05-09-2014, 12:51 AM	#45 (permalink)
shika805 Enthusiast Member Join Date: Sep 2011 Location: Santa Barbara, CA Posts: 491 Drives: 40th Z, 71' 240z Rep Power: 19	dope. __________________ 1971 Datsun 240z, 2010 40th Anniversary Z Build #541

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTR-style Monitoring System for 370Z	jamesDJRPM	Exterior & Interior	25	04-07-2015 05:45 AM
Fujimara Rear Diffuser VS. EVO-R NEW Diffuser	KB2	Exterior & Interior	12	02-11-2014 08:03 PM
370Z Nismo Style Lip kit	boostedz	Parts for sale (Private Classifieds)	10	05-06-2010 04:07 PM
TopSecret Lip l Slammed l 5" lips l Negative Camber	SOLISIMO	The Lounge (Off Topic)	14	07-09-2009 01:06 PM
Track Video: Nissan 370Z vs 350Z (VQDE) vs 350Z HR (VQHR)	AK370Z	Track / Autocross / Drifting / Dragstrip	2	05-24-2009 08:33 PM