02-18-2014, 07:15 PM
|
#11 (permalink)
|
|
Base Member
Join Date: Mar 2011
Location: Texas
Posts: 124
Drives: 370Z
Rep Power: 16
|
Quote:
Originally Posted by bkjunk
At lowes right now to get a deep . 10 mm socket fow sport wing removal. I already popped the hatch cover and only see. Two bolts. Are there more?
Sent from my SPH-L720 using Tapatalk
|
Yes there are a total of 4 bolts and all are accesible from the same 1" hole visible on each side of the hatch once the back door finisher lower panel is removed. One set of nuts is clearly visible by looking through the hole and the other set are actually bolts about 1.5" more towards the rear of the Z hatch.
Yes the 10mm is needed for both. Be very careful removing the nuts and bolts because if they fall, they slide towards the front of the hatch between the open spaces. May want to stuff a paper towel in there to prevent the nut/bolt from sliding towards the front of the hatch. I had to use a magentic extension to fish the first one out. Lessons learned.
|
|
|
Similar Threads
89Likes
Threaded Mode
