Stillen front splitter VS. Possum

FireDan50 · 09-15-2013, 07:23 PM

So first my Stillen supercharger blew up and now my Stillen front splitter is destroyed. I only had both items on for about a month!!! I just DO NOT have luck with Stillen products.

I was on my way to a car show when a dead possum came out from under the car in front of me and it was too late for me to take any action but slow down. The splitter is gone and now my front bumper has a small tear in the corner

Now I need to try and see if I can get my front end fixed before Friday because I'm going to Nopi Nationals this weekend.

Trips · 09-15-2013, 07:56 PM

Man talk about some bad luck!

Sorry to hear what happened But glad it wasn't worse.

Darketch · 09-15-2013, 08:42 PM

Sux man, sorry to hear about that. Went through the same thang only it was a dead deer back in May. What ya gonna do? Back to stock?

Xplicit97 · 09-15-2013, 08:50 PM

Aren't these lips urethane?

Sent from my SPH-L710 using Tapatalk 2

AdamRacer · 09-15-2013, 10:36 PM

By the looks of it I think you're going to have a tough time fixing that lip. Whatever you do its going to show. You could try and glue it back together temporarily or add a thin top layer of wrap or plastic and paint it black to match.
Either way hope all goes well and sorry to hear that.

FireDan50 · 09-16-2013, 06:27 AM

Definitely not going to fix this lip or buy the same thing to replace it. I'm not exactly sure what the material is that its made out of...pretty sure its urethane though. This lip is not flexible at all....only when it sags in the middle lol. Mine was slightly starting to show a little sag.

Read T · 09-16-2013, 06:57 PM

At least you're $100 richer after the car show

tonythetiger · 09-16-2013, 07:01 PM

crazy! i almost hit a live one on saturday

m3chhawk · 09-17-2013, 05:18 PM

That sucks dude. Look at the bright side, your cheap lip saved your expensive bumper and fang cover.

Amuse370z · 09-17-2013, 06:34 PM

On a side note, that looked really good. The splitters flowed nice with the canards.

edub370 · 09-18-2013, 12:55 PM

these lips are so cheap to replace. easy come easy go. coulda been the bumper as mech stated above

09-15-2013, 07:23 PM	#1 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Stillen front splitter VS. Possum So first my Stillen supercharger blew up and now my Stillen front splitter is destroyed. I only had both items on for about a month!!! I just DO NOT have luck with Stillen products. I was on my way to a car show when a dead possum came out from under the car in front of me and it was too late for me to take any action but slow down. The splitter is gone and now my front bumper has a small tear in the corner Now I need to try and see if I can get my front end fixed before Friday because I'm going to Nopi Nationals this weekend.

09-15-2013, 07:56 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Man talk about some bad luck! Sorry to hear what happened But glad it wasn't worse. __________________

09-15-2013, 08:50 PM	#4 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 45 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 299	Aren't these lips urethane? Sent from my SPH-L710 using Tapatalk 2 __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

09-15-2013, 10:36 PM	#5 (permalink)
AdamRacer Enthusiast Member Join Date: Jan 2012 Location: North Florida Posts: 316 Drives: '12 MBlue 370z 6sp Rep Power: 13	By the looks of it I think you're going to have a tough time fixing that lip. Whatever you do its going to show. You could try and glue it back together temporarily or add a thin top layer of wrap or plastic and paint it black to match. Either way hope all goes well and sorry to hear that. Last edited by AdamRacer; 09-15-2013 at 10:39 PM.

09-16-2013, 06:57 PM	#7 (permalink)
Read T A True Z Fanatic Join Date: May 2012 Location: Raleigh, NC Posts: 1,046 Drives: 11 Nissan 370z BC 6M Rep Power: 17	At least you're $100 richer after the car show __________________ 2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

09-15-2013, 08:42 PM	#3 (permalink)
Darketch Enthusiast Member Join Date: May 2013 Location: Virginia Posts: 429 Drives: 14 NISMO #292 Rep Power: 11	Sux man, sorry to hear about that. Went through the same thang only it was a dead deer back in May. What ya gonna do? Back to stock?

09-16-2013, 06:27 AM	#6 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Definitely not going to fix this lip or buy the same thing to replace it. I'm not exactly sure what the material is that its made out of...pretty sure its urethane though. This lip is not flexible at all....only when it sags in the middle lol. Mine was slightly starting to show a little sag.

09-16-2013, 07:01 PM	#8 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 192	crazy! i almost hit a live one on saturday __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

09-17-2013, 05:18 PM	#9 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	That sucks dude. Look at the bright side, your cheap lip saved your expensive bumper and fang cover. edub370 likes this. __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

09-17-2013, 06:34 PM	#10 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 16	On a side note, that looked really good. The splitters flowed nice with the canards.

09-18-2013, 12:55 PM	#11 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	these lips are so cheap to replace. easy come easy go. coulda been the bumper as mech stated above __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Stillen front splitter	Schsplayer00	Parts for sale (Private Classifieds)	0	02-24-2013 09:23 PM
[FOR SALE] New Stillen Front Splitter	Aizen Sosuke	Parts for sale (Private Classifieds)	7	10-30-2012 11:12 AM
[FOR SALE] NIB Stillen front splitter	Red__Zed	Parts for sale (Private Classifieds)	19	09-06-2011 07:52 PM
WTB: Stillen front splitter...	iceman21_23	Parts for sale (Private Classifieds)	0	10-24-2010 07:07 PM
stillen front canard and splitter	chuckd05	Exterior & Interior	81	05-28-2010 03:26 PM