Aftermarket Steering Wheel Hub Issues

Originally Posted by scruffydog

thanks turns out I had the clockspring & the hub mis-aligned with the actual steering axle. My marks didn't line up b/c I accidentally used the wrong tick mark for alignment.

By the way, I have a Works Bell Short hub and didn't have any issues with needing to remove any clock spring.

My Hub kit came with 2 fuses which attaches to the orange and yellow plug and it does plug and play and does not trip on the VDC or Traction control.

However, I'm still having issue getting the horn to work because i think the wiring harness provided (wire location) is incorrect.

Also my air bag light is not turning off due to my aftermarket seat. even with a 4.7 ohm 1/2Watt resistor 5% error and reset procedure, i'm still stuck with a flashing Airbag light. I even tried 2 different brand ones too....frustrated.

Hope this helps everyone, any help back with the horn or seat airbag would be appreciated. I've followed the other thread but still no luck.