07-07-2016, 09:25 PM
|
#1 (permalink)
|
|
Enthusiast Member
Join Date: Aug 2014
Location: Orlando
Age: 35
Posts: 295
Drives: 370Z 6SPD Touring
Rep Power: 13
|
Quote:
Originally Posted by mults
For the clutch pedal switch, there is a welded 14mm square on the bracket that needs to be held with a wrench while you loosen the jam nut on the switch. Mine was tight as heck and it took a little bit to get it loose. I changed the one for the clutch pedal 3 weeks ago (about $26) and the issue went away for good...
|
To be clear... both the outside welded and the inside nut are 14mm?
I did notice that the one on the outside is welded, but must it really be held in place if its welded?
I just went through my tool box and have all sorts of different wrenches except the 14mm 
I tried using the adjustable wrench, but it never stays held on...
Plus how the hell did you guys manage to work with such confined space? The smallest wrench I can find is 6" and even that's too long...
Last edited by Bad Boy; 07-07-2016 at 09:27 PM.
|
|
|
Similar Threads
52Likes
Hybrid Mode
