Racing Seat Brackets - Bride Gias

FuszNissan · 08-03-2009, 05:49 PM

That is one of the Employer to employee benifits....lol

CBRich · 08-03-2009, 06:31 PM

They look really sharp. You sure you don't want to trade those Nismo seats for the stock cloth seats. Leather's a pain.

kdoske · 08-03-2009, 09:21 PM

Looks cool. I just wish the seats had a little bit more branding on them....

I KID I KID!

Bster · 08-04-2009, 01:42 AM

Looks good Equinox!!

Are there any airbag (or any other sort of) resistors that you need to installed with the seats as well?

Endgame · 08-04-2009, 08:57 AM

Quote:

Originally Posted by Equinox

FuszNissan trolling boards at work claiming he's trying to get buyers, haha.

LOL!!! I find this to be a very funny random comment.

Nice car man...

Equinox · 08-04-2009, 09:29 AM

Quote:

Originally Posted by Bster

Looks good Equinox!!

Are there any airbag (or any other sort of) resistors that you need to installed with the seats as well?

Both seats in the car have an airbag integrated into the outside shoulder, and there is a wire leading to them under the seats. When you unplug these they will cause an airbag light on your dash.

The passenger seat also has a weight sensor to detect the passenger. If you disconnect this, your Passenger Airbag light on the right side of the dash will stay lit.

I haven't done anything to make these go away, but I will research solutions, most likely solder a resistor inline to the harness, and jump them so they loop.

Equinox · 08-04-2009, 09:44 AM

With the airbag connected, measure the resistance drop across the airbag harness. (Measure wire going to airbag, and wire coming to airbag.) Whatever the ohm resistance is, just bridge the harness with a resistor of that ohm rating, and light will go away.

Remember that the 370 needs to have the diagnostic mode run in order to actually remove the light once the airbag or resistor is reconnected AK370Z had a thread on how to accomplish this, as well as a link to it from his radio install, DNX6140 Kenwood I think.

M.Bonanni · 08-04-2009, 10:44 AM

Also for the passenger air bag, a friend who has a Mini Cooper bought a factory weight sensor from Mini that he installed into his Recaro seats so the passenger airbag remains functional. Just an idea.

Equinox · 08-04-2009, 10:47 AM

well I was considering gutting the stock seat, because really the skin is just zipper on like all seats, and taking the weight sensor off. The bride seats have centers that velcro on so you can wash them after all those sweaty Solo II events. I can just slide the weight sensor under there.

M.Bonanni · 08-04-2009, 10:51 AM

Quote:

Originally Posted by Equinox

well I was considering gutting the stock seat, because really the skin is just zipper on like all seats, and taking the weight sensor off. The bride seats have centers that velcro on so you can wash them after all those sweaty Solo II events. I can just slide the weight sensor under there.

If you do that, make sure you post a DIY thread on transferring the stock weight sensor to an aftermarket seat. That is something that most people who get aftermarket seats don't think about.

Modshack · 08-04-2009, 11:06 AM

Quote:

Originally Posted by Equinox

With the airbag connected, measure the resistance drop across the airbag harness. (Measure wire going to airbag, and wire coming to airbag.) Whatever the ohm resistance is, just bridge the harness with a resistor of that ohm rating, and light will go away.

A 4.7 Ohm resistor worked for my Audi Bags....

Equinox · 08-04-2009, 11:07 AM

I'm sure that picture filled in a lot of gaps for people. Good looking out Modshack. You and your diamond plate mats - ya ricer. Lol,

DDM - I'll try to remember to make a DIY. I usually get too excited and just complete the mod instead of documenting it, lol.

LiquidZ · 08-04-2009, 11:20 AM

Moar

Equinox · 09-29-2009, 09:42 AM

I installed the passenger air bag weight sensor in my passenger bride gias seat - to allow the sensor to arm when someone is in the car. Here are some pictures!
Nissan 370Z Forum - Equinox's Album: Air Bag Weight Sensor in Bride Gias Seats

More to come, I took the SRS air bag out of the passenger seat as well, and I'm gonna try figuring out the resistance needed to trick the air bag light. That's this week's project as long as the RX-7 stops distracting me with new parts coming in the mail. Lol.

M.Bonanni · 09-29-2009, 11:07 AM

Awesome! Thanks Equinox!

08-03-2009, 05:49 PM	#31 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	That is one of the Employer to employee benifits....lol __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

08-04-2009, 01:42 AM	#34 (permalink)
Bster Base Member Join Date: Feb 2009 Location: Singapore Posts: 174 Drives: '09 PW Z34 Manual Rep Power: 16	Looks good Equinox!! Are there any airbag (or any other sort of) resistors that you need to installed with the seats as well? __________________ TEIN Monoflex with EDFC \| H&R 20mm Spacer \| SPC Rear Camber \| HKS Hi-Power \| Berks High Flow Cat \| Stillen G3 \| EVO R Rear Diffuser \| Blacked out headlights \| Z1 34Row Cooler \| Z1 SS Brake lines Last edited by Bster; 08-04-2009 at 01:45 AM.

08-04-2009, 09:44 AM	#37 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 17	With the airbag connected, measure the resistance drop across the airbag harness. (Measure wire going to airbag, and wire coming to airbag.) Whatever the ohm resistance is, just bridge the harness with a resistor of that ohm rating, and light will go away. Remember that the 370 needs to have the diagnostic mode run in order to actually remove the light once the airbag or resistor is reconnected AK370Z had a thread on how to accomplish this, as well as a link to it from his radio install, DNX6140 Kenwood I think. __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD)

08-04-2009, 10:44 AM	#38 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	Also for the passenger air bag, a friend who has a Mini Cooper bought a factory weight sensor from Mini that he installed into his Recaro seats so the passenger airbag remains functional. Just an idea. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

08-04-2009, 10:47 AM	#39 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 17	well I was considering gutting the stock seat, because really the skin is just zipper on like all seats, and taking the weight sensor off. The bride seats have centers that velcro on so you can wash them after all those sweaty Solo II events. I can just slide the weight sensor under there. __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD)

08-03-2009, 06:31 PM	#32 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	They look really sharp. You sure you don't want to trade those Nismo seats for the stock cloth seats. Leather's a pain.

08-03-2009, 09:21 PM	#33 (permalink)
kdoske Track Member Join Date: Jul 2009 Location: Louisiana Posts: 541 Drives: 800whp Unicorn FI Z Rep Power: 16	Looks cool. I just wish the seats had a little bit more branding on them.... I KID I KID!

08-04-2009, 11:07 AM	#42 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 17	I'm sure that picture filled in a lot of gaps for people. Good looking out Modshack. You and your diamond plate mats - ya ricer. Lol, DDM - I'll try to remember to make a DIY. I usually get too excited and just complete the mod instead of documenting it, lol. __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD)

08-04-2009, 11:20 AM	#43 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 704	Moar __________________ Last edited by LiquidZ; 08-04-2009 at 11:30 AM.

09-29-2009, 09:42 AM	#44 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 17	I installed the passenger air bag weight sensor in my passenger bride gias seat - to allow the sensor to arm when someone is in the car. Here are some pictures! Nissan 370Z Forum - Equinox's Album: Air Bag Weight Sensor in Bride Gias Seats More to come, I took the SRS air bag out of the passenger seat as well, and I'm gonna try figuring out the resistance needed to trick the air bag light. That's this week's project as long as the RX-7 stops distracting me with new parts coming in the mail. Lol. __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo #0058 (SOLD) Last edited by Equinox; 09-29-2009 at 09:45 AM.

09-29-2009, 11:07 AM	#45 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	Awesome! Thanks Equinox! __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fake Bride vs Real bride	The_Zed_car	Exterior & Interior	44	07-26-2011 05:36 PM
Seat Adjustment	ZzzZz	Exterior & Interior	8	09-26-2010 01:04 PM
In stock Bride Seats	370Ztune	Exterior & Interior	27	04-15-2010 03:53 AM
Seat click fix	NotmyGTR	Nissan 370Z General Discussions	25	02-22-2010 05:46 PM