Help finding always on power source

TacoSport10 · 06-14-2019, 09:27 AM

Thanks guys! I have the motion setting on my dash cam as well. I'll try that stop lamp fuse location. If it doesn't work, and/or I continue to loose my dash cam settings, I'll try and return the cam. I really wanted to use the fuse block bc the wiring harness for the dash cam came with a built in fuse on the end of the wire. So all I have to do is remove the factory fuse, and plug in this fuse with the wire.

Zedn3wb13 · 04-07-2023, 02:22 PM

Quote:

Originally Posted by JARblue

The STOP LAMP fuse is always on

That's what I ran my dash cam on so it could have power for the motion triggered recording security feature when the car is parked.

Could you share a photo of how you tapped this fuse as the large connector for “ELEC PARTS” is just above it and I can’t remove the 10A fuse of the “STOP LAMP” and I doubt the add-a-circuit could fit with the “ELEC PARTS” just above it.

Also wanted to know if it’s safe to remove the “ELEC PARTS” connector to remove the “STOP LAMP” fuse and then reconnect.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alternate source for 12v power	vermithrax	Audio & Video	23	09-19-2012 03:52 PM
Easiest source of switched power?	gr8-wrx	Exterior & Interior	2	04-12-2011 12:41 PM
video camera recorder needs a power source	zmyride	DIY Section (Do-It-Yourself)	1	03-16-2011 04:59 PM
Finding The Right Car For Me	Bibimbap	Nissan 370Z General Discussions	25	09-17-2009 04:43 PM
Need Help Finding My Z...	Jason	Nissan 370Z Pricing / Ordering Discussions	16	06-04-2009 12:49 PM

06-14-2019, 09:27 AM	#16 (permalink)
TacoSport10 Base Member Join Date: Mar 2019 Location: Virginia Posts: 182 Drives: 13 370Z Touring Sprt Rep Power: 197	Thanks guys! I have the motion setting on my dash cam as well. I'll try that stop lamp fuse location. If it doesn't work, and/or I continue to loose my dash cam settings, I'll try and return the cam. I really wanted to use the fuse block bc the wiring harness for the dash cam came with a built in fuse on the end of the wire. So all I have to do is remove the factory fuse, and plug in this fuse with the wire.