Interest check - ~Kellyefields~ custom hood damper kit

dmhenderson · 01-28-2013, 06:20 AM

It's "first come, first serve" so you're better off just sending him cash and your shipping address if you want in.

kellyefields · 01-29-2013, 06:17 AM

Putting together the shipping boxes and addresses. once the parts come in they will be shipped out same day. Remember is it first come first serve so if I do not have your order I wont be able to get it out quickly. Parts are scheduled to arrive late this week first of next week.

seizer8 · 02-05-2013, 09:23 PM

I ordered mine from the The Z store already, but it's out of stock, maybe I can cancel it? Am I too late?

Kinda ticked off to hear these can damage my hood. Or is it just he Z1 motor sports one that's bad?

Joepro · 02-05-2013, 09:41 PM

Visiting my grandparents in Leesburg, I should run down and grab one! lol. If there are going to be left overs lmk, Ill paypal you tomorrow if you have enough, Ill race it back to PA!

kellyefields · 02-05-2013, 09:54 PM

I have plenty to go around. the parts shipped today so I hope to have them in a couple of days. I have sold two right now there are a total of 15 available. first come first serve.

MarkGideon · 02-06-2013, 08:58 AM

Quote:

Originally Posted by kellyefields

I have plenty to go around. the parts shipped today so I hope to have them in a couple of days. I have sold two right now there are a total of 15 available. first come first serve.

I'm in. PM sent.

Thanks

MarkGideon · 02-06-2013, 12:38 PM

Quote:

Originally Posted by MarkGideon

I'm in. PM sent.

Thanks

Now I am REALLY in. Payment sent.

kellyefields · 02-05-2013, 10:47 PM

it is not about bending the hood it is more about not allowing the hood to close properly. this is due to a couple of reasons. 1 bad design of the kit or 2 improper installation of the kit. Usually it comes down to improper installation.

chops · 02-07-2013, 03:53 PM

Quote:

Originally Posted by kellyefields

it is not about bending the hood it is more about not allowing the hood to close properly. this is due to a couple of reasons. 1 bad design of the kit or 2 improper installation of the kit. Usually it comes down to improper installation.

if thats the case, fine, but the original post claims that the z1 hood dampers are bending hoods. which IMO...is wrong. considering z1 is an actual forum sponsor, and you are not.

kellyefields · 02-07-2013, 09:26 PM

Quote:

Originally Posted by chops

if thats the case, fine, but the original post claims that the z1 hood dampers are bending hoods. which IMO...is wrong. considering z1 is an actual forum sponsor, and you are not.

guys we need to let this go. if you want to go with z1 struts then go with them. you dont see me posting on their threads even though they used the design I came up with. They decided to make their own set after they said they did not want to work with me due to the low percentage they would make so they decided to cut out the middle man. simple fact is their kit is sound because I did the Research and development and got it right before selling them to the public the problem comes down to the fact the instructions on how to install them is not there. I lay out the issues that one may have and have had success in helping people fix the problems 99 percent of the time. I have even refunded people that did not like it for one reason or the other. Simply stated you can buy there kit or buy mine they are almost identical. I am doing this to help out the forum members and the only money made goes to the forum ($5 per each sale). So to chops

now down to business I have about 8 left if all of those that said they were interested comes through. Parts left the supplier and should be arriving soon. I will keep you posted and will send shipping info once I ship them via paypal.

chops · 02-07-2013, 09:59 PM

Quote:

Originally Posted by kellyefields

guys we need to let this go. if you want to go with z1 struts then go with them. you dont see me posting on their threads even though they used the design I came up with. They decided to make their own set after they said they did not want to work with me due to the low percentage they would make so they decided to cut out the middle man. simple fact is their kit is sound because I did the Research and development and got it right before selling them to the public the problem comes down to the fact the instructions on how to install them is not there. I lay out the issues that one may have and have had success in helping people fix the problems 99 percent of the time. I have even refunded people that did not like it for one reason or the other. Simply stated you can buy there kit or buy mine they are almost identical. I am doing this to help out the forum members and the only money made goes to the forum ($5 per each sale). So to chops

now down to business I have about 8 left if all of those that said they were interested comes through. Parts left the supplier and should be arriving soon. I will keep you posted and will send shipping info once I ship them via paypal.

bro, im not trying to start anything with you, so now "owned" here. i was simply stating that the original post makes it out to seem that the z1 hood struts are a problem. i am not defending z1 whatsoever, just wanted to call it out.

daisuke149 · 02-07-2013, 10:04 PM

Quote:

Originally Posted by kellyefields

guys we need to let this go. if you want to go with z1 struts then go with them. you dont see me posting on their threads even though they used the design I came up with. They decided to make their own set after they said they did not want to work with me due to the low percentage they would make so they decided to cut out the middle man. simple fact is their kit is sound because I did the Research and development and got it right before selling them to the public the problem comes down to the fact the instructions on how to install them is not there. I lay out the issues that one may have and have had success in helping people fix the problems 99 percent of the time. I have even refunded people that did not like it for one reason or the other. Simply stated you can buy there kit or buy mine they are almost identical. I am doing this to help out the forum members and the only money made goes to the forum ($5 per each sale). So to chops

now down to business I have about 8 left if all of those that said they were interested comes through. Parts left the supplier and should be arriving soon. I will keep you posted and will send shipping info once I ship them via paypal.

Quote:

Originally Posted by chops

bro, im not trying to start anything with you, so now "owned" here. i was simply stating that the original post makes it out to seem that the z1 hood struts are a problem. i am not defending z1 whatsoever, just wanted to call it out.

same as Chops. dont care which set people buy. but spreading ******** is well.. ********.

dmhenderson · 02-07-2013, 10:08 PM

Quote:

Originally Posted by chops

bro, im not trying to start anything with you, so now "owned" here. i was simply stating that the original post makes it out to seem that the z1 hood struts are a problem. i am not defending z1 whatsoever, just wanted to call it out.

Like I said, they were/have been an issue for several people on these forums but not all. Quit trying to make it sound like there was some sort of agenda here.

seizer8 · 02-06-2013, 08:23 AM

Hopefully it comes with good installation instructions. I'm a bit apprehensive about installing them now.

Mr&Mrs · 02-06-2013, 09:11 AM

Dang i am taking some things to jeff today to have painted let me know when you get them.

01-28-2013, 06:20 AM	#1 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 28	It's "first come, first serve" so you're better off just sending him cash and your shipping address if you want in. __________________

01-29-2013, 06:17 AM	#2 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 49 Posts: 1,166 Drives: Supercharged Rep Power: 18	Putting together the shipping boxes and addresses. once the parts come in they will be shipped out same day. Remember is it first come first serve so if I do not have your order I wont be able to get it out quickly. Parts are scheduled to arrive late this week first of next week. __________________ MY 2009 SC BUILD.

02-05-2013, 09:23 PM	#3 (permalink)
seizer8 Base Member Join Date: Jan 2013 Location: Carol Stream IL Chicago Posts: 103 Drives: 2010 Z Touring AT Rep Power: 14	I ordered mine from the The Z store already, but it's out of stock, maybe I can cancel it? Am I too late? Kinda ticked off to hear these can damage my hood. Or is it just he Z1 motor sports one that's bad? __________________ 2010 Platinum Graphite, Touring; Custom Coated Sport Brakes; Z1 Drilled and Slotted Rotors; SS Brake Lines; Hood Struts; Rear LED Fog Light; GT-R Wheels; LED Interior Lighting Sunday Cars and Coffee Last edited by seizer8; 02-05-2013 at 10:10 PM.

02-05-2013, 09:41 PM	#4 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 35	Visiting my grandparents in Leesburg, I should run down and grab one! lol. If there are going to be left overs lmk, Ill paypal you tomorrow if you have enough, Ill race it back to PA! __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-05-2013, 09:54 PM	#5 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 49 Posts: 1,166 Drives: Supercharged Rep Power: 18	I have plenty to go around. the parts shipped today so I hope to have them in a couple of days. I have sold two right now there are a total of 15 available. first come first serve. __________________ MY 2009 SC BUILD.

02-05-2013, 10:47 PM	#8 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 49 Posts: 1,166 Drives: Supercharged Rep Power: 18	it is not about bending the hood it is more about not allowing the hood to close properly. this is due to a couple of reasons. 1 bad design of the kit or 2 improper installation of the kit. Usually it comes down to improper installation. __________________ MY 2009 SC BUILD.

02-06-2013, 08:23 AM	#14 (permalink)
seizer8 Base Member Join Date: Jan 2013 Location: Carol Stream IL Chicago Posts: 103 Drives: 2010 Z Touring AT Rep Power: 14	Hopefully it comes with good installation instructions. I'm a bit apprehensive about installing them now. __________________ 2010 Platinum Graphite, Touring; Custom Coated Sport Brakes; Z1 Drilled and Slotted Rotors; SS Brake Lines; Hood Struts; Rear LED Fog Light; GT-R Wheels; LED Interior Lighting Sunday Cars and Coffee

02-06-2013, 09:11 AM	#15 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	Dang i am taking some things to jeff today to have painted let me know when you get them. __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evo-R Hood Damper Install	Stealth36	Exterior & Interior	10	06-29-2013 07:11 PM
The Z Store - CF hood damper kit	whittier	Nissan 370Z Roadster (Convertible)	3	01-25-2013 08:17 AM
hood damper kit??? where?	boomboom	Exterior & Interior	4	08-22-2012 06:19 PM
FS: Prosport CF Hood damper set with bracket	kenchan	Parts for sale (Private Classifieds)	14	08-27-2010 12:12 AM