Thanks Jason! Arrived well packed in the box :tup:
http://i327.photobucket.com/albums/k...psers4xqty.jpg

Nice!

I recommend pushing the gauges forward so they butt up against the back side of the silver trim rings and add a dab of silicone or hot glue on the back side to secure the gauge.

Looking good! :tup:

Good idea, will give it a shot. the fit is so good that a small dab of silicone would hold it very well. :tup:

Finally got caught up and had time to program and install my AEM gauges into the cubby mount. Looks awesome. I'll be installing them on the 10th along with a Z1 oil cooler kit. Then comes the Stillen SC with a air to air cooler mod.

Cool!

Something I noticed, the cubby mount is upside down. The curve is nearest the radio.

Without looking thru the whole thread, has someone done a plx gauge in one of these?

https://c4.staticflickr.com/9/8829/1...58461979_z.jpg8385684098_80aef258b3_z by Jason Gale, on Flickr

Took a picture of the inside with my camera today. Both pillars done by Mr GaleForce!

http://i.imgur.com/DwSH1Ru.jpg

Looking good Tony! Thanks for sharing!

I really enjoy seeing custom, handmade items with such attention to detail. As another person that appreciates the OCD that kicks in when a project like this is started, great job!

Gauges installed! Thanks GaleForce!!!

I was getting ready to head to Z1 for a EcuTek tune when my fuel pump started acting up. Dang good thing I had the AFR gauge because it was reading 18 AFR which is BAD, real bad. Fuel pressure had dropped to 40 psi. By the time I limped the car home the fuel pressure had dropped to less than 20. Time to pull the pump and see what is going on.

Thank you Sir :tiphat:

First, I hope you get your fuel pressure issue figured out.

Second, thanks for sharing the pics! Looking great! :tup:

Got to think about that centre sunglass holder replacement :)

Though I have a question about the single pillar pods. To utilize those factory looking trim rings is it limited to 52mm or is 60mm an option and still retain that OEM type look?

Want to run a wideband AFR/Boost controller combo and would prefer the extra real estate.

The way my pillar mould works is that it perfectly cups a 52mm gauge. Extensive modifications would need to be made for a 60mm gauge to fit in that same spot, also I would need to verify if the OEM gauge trim is big enough to fully cover the 60mm gauge.

I could always fabricate a one-off gauge trim for the 60mm gauge if it comes down to it.

Here is a custom trim ring that I fabricated to mimic the OEM gauge trim.

https://c3.staticflickr.com/8/7562/2...c21645ba_c.jpgUntitled

Appreciated that Jason, but it's not worth it just to satisfy a minor want vs need.
Would you PM me a price on what the single 52mm pods are going for nowadays when you have a moment. Thanks

PMed.

Get I get a price please

Sent from my SM-G920F using Tapatalk

You need to tell him what type of pillar you want and where it's shipped to

Sent :tup:

:iagree:

Mr. Galeforce,
Could you PM me the price+shipping for a dual A-pillar gauge pod to 89138 please?
Thanks!

Sent from my LG-H918 using Tapatalk

Done :tiphat:

Price on a double pod, Zip 34759. Please and thanks!!!

Installed this past weekend! Thanks GaleForce!

http://i3.photobucket.com/albums/y65...pslferkxwa.jpg

http://i3.photobucket.com/albums/y65...psgnts1a6o.jpg

This is kool, but could you make them for RHD lol? :)

dat looks fantastic! :tup:

I can/have, but I need to have my car in order for me to make them. The problem is my car is still in California and I'm in Ontario Canada.

Many thanks! :tiphat: :D

Absolutely stellar fit and finish there :tup:

When do you get the car back. I am definatle interested in getting this!

:)

Good question, I'm trying to get that answer myself. Keep in touch, I have another owner from Australia that wants one as well. He's first on my list for when my car returns.

Put me on the list for a dual LHD please.

No worries, you can put me on the waiting list for single RHD :)

Could you PM me the price & shipping for a dual A-pillar gauge pod to 11793 please? It would be greatly appreciated it, please and thank you!

My car is finally back so I can get started on RHD pillars.

Sent :tiphat:

ETA for LHD pillar? and cost?

Thanks in advance

Could Pm me price of the dual gauge pod pillar to 48073 along with ETA?

Can you pm me the price of the single A pillar gauge pod to 20758 along with the ETA?

Thanks!

Done :tup: