Nissan 370Z Forum
Page 15 of 16 « First 51314 15 16
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Custom A-Pillar gauge pod - lots of pictures (http://www.the370z.com/exterior-interior/64959-custom-pillar-gauge-pod-lots-pictures.html)

bushyguy 02-02-2018 10:13 AM
Can I get pricing for the double pod option?

Shipping info: CA 93065

:tiphat:

scope22 03-04-2018 08:54 AM
Quote:
Originally Posted by GaleForce (Post 3583266)
The way my pillar mould works is that it perfectly cups a 52mm gauge. Extensive modifications would need to be made for a 60mm gauge to fit in that same spot, also I would need to verify if the OEM gauge trim is big enough to fully cover the 60mm gauge.

I could always fabricate a one-off gauge trim for the 60mm gauge if it comes down to it.
Did you ever get around to doing a 60mm gauge pod? i just got a 60mm Defi and i have your 52mm pod which i can dremel out to fit a 60mm but then its not going to be recessed.

jwick 03-04-2018 09:45 AM
Quote:
Originally Posted by scope22 (Post 3735510)
Did you ever get around to doing a 60mm gauge pod? i just got a 60mm Defi and i have your 52mm pod which i can dremel out to fit a 60mm but then its not going to be recessed.


I have one for a 62mm (which is my Greddy Multi-gauge). Sure Gale could make it work but you might have to send him the gauge to make sure it’s right.

GaleForce 03-05-2018 08:14 AM
Quote:
Originally Posted by scope22 (Post 3735510)
Did you ever get around to doing a 60mm gauge pod? i just got a 60mm Defi and i have your 52mm pod which i can dremel out to fit a 60mm but then its not going to be recessed.
I have made pillars for 60mm gauges. The 60mm gauge ends up being surface mount, and the OEM gauge trim is not used.

scope22 03-05-2018 11:36 AM
Quote:
Originally Posted by GaleForce (Post 3735758)
I have made pillars for 60mm gauges. The 60mm gauge ends up being surface mount, and the OEM gauge trim is not used.
is the outside diameter the same as in 52mm gauge?

GaleForce 03-05-2018 11:42 AM
Quote:
Originally Posted by scope22 (Post 3735861)
is the outside diameter the same as in 52mm gauge?
That would depend on the gauges. In the case of a custom order, I make them to your gauge’s specifications.

EliteXpress 03-06-2018 09:30 PM
1 Attachment(s)
My setup "GaleForce hybrid Pillar"
52mm Innovate PSB-1 PowerSafe Boost & AFR Gauge
60mm ProSport Premium Evo Oil Pressure Gauge

Spooler 03-06-2018 10:09 PM
Can I get a quote for a 60mm Eboost2 boost controller on a single gauge A-pillar. How do we order from you online? Shipping is 30417.

GaleForce 03-07-2018 08:29 AM
Quote:
Originally Posted by Spooler (Post 3736395)
Can I get a quote for a 60mm Eboost2 boost controller on a single gauge A-pillar. How do we order from you online? Shipping is 30417.
PM’d :tiphat:

Spartan 1771 10-04-2018 11:43 AM
Are these still available? I'm looking for a single pod for a 52mm gauge.

blkwidow 11-15-2018 01:50 PM
Can i get a quote for a double pod shipped to 78253. Thanks!

OldFart 01-01-2019 08:31 AM
Can I get a quote for a double pod (52mm), along with the factory trim pieces included shipped to 17015.

GaleForce 01-01-2019 08:34 AM
Custom A-Pillar gauge pod - lots of pictures
 
PM’d

zfever 01-11-2019 10:24 PM
Can I get a quote for a single-pod 52mm (for AEM Flex Fuel Wideband FAILSAFE Gauge) shipped to 75044?

Spartan 1771 01-13-2019 09:49 AM
I sent you an email, but have not heard back. Looking for a single pod for a 52mm gauge wirh the darker nismo trim shipped to 21756.

Thanks!

Spartan 1771 02-28-2019 06:01 PM
Got the pod today and it looks amazing! I can't wait to install it.

Thanks so much for a great transaction!

2011 Nismo#91 05-06-2019 11:14 AM
Can I get a quote for the 52mm single pillar to 07086. Thanks!

Roadster370 05-06-2019 03:32 PM
A pillar
 
Just wondering if any Pics of the pillar install ?

Roadster370 05-06-2019 03:47 PM
A Pillar
 
Great Job, Any pics of the install?

soill370z 06-04-2019 03:47 AM
quote for dual pod shipped to 62959?

NorthStyle 06-04-2019 06:50 AM
Quote:
Originally Posted by Roadster370 (Post 3850112)
Great Job, Any pics of the install?
Pretty much pop the old one out and place the new one in, and be careful of the curtain airbags... pretty cut and dry.

madwi 06-04-2019 06:57 AM
Quote:
Originally Posted by Roadster370 (Post 3850112)
Great Job, Any pics of the install?
Here is one installed.
https://i.imgur.com/BqvR7rCl.jpg?1

Husky 06-07-2019 10:49 AM
What price we talkin

JARblue 06-07-2019 10:59 AM
I just received my single pod pillar last week. It is a work of art :tiphat:

soill370z 07-29-2019 05:18 AM
I need a dual pod please pm me thanks!

2011 Nismo#91 11-20-2019 05:10 PM
What's the typical turn around time for this, haven't gotten a response for 6months?

NorthStyle 11-20-2019 07:40 PM
Quote:
Originally Posted by 2011 Nismo#91 (Post 3890432)
What's the typical turn around time for this, haven't gotten a response for 6months?
I had mine in about 3 weeks which included shipping from his location to Germany (where I lived at the time).

JARblue 11-21-2019 04:32 AM
I had trouble reaching him via the forum; he's not on much anymore. PM me for his email - he's much more responsive that way. He gave me a 4-6 week fabrication estimate. Got mine earlier this year.

Sway 12-27-2020 06:50 PM
Is he still doing these? I’d like to order one...

madwi 12-27-2020 08:19 PM
Maybe try him at 3Gs customs.

BettyZ 04-05-2021 04:14 PM
His website is deader than chivalry.

JARblue 04-05-2021 04:51 PM
He still makes them. Have to email him. I can give you his email via PM.

BettyZ 04-05-2021 05:15 PM
Quote:
Originally Posted by JARblue (Post 3990987)
He still makes them. Have to email him. I can give you his email via PM.
I'm tempted.. but don't want a double pillar.

Sent from my SM-G955U using Tapatalk

Hotrodz 04-05-2021 05:28 PM
Quote:
Originally Posted by BettyZ (Post 3990990)
I'm tempted.. but don't want a double pillar.

Sent from my SM-G955U using Tapatalk
Hey I have single pillar I can sell you. It has a Haltec double AFR gauge already installed. All you would need to get is the sensor.

Sent from my SM-G965U using Tapatalk

BettyZ 04-05-2021 06:33 PM
Quote:
Originally Posted by Hotrodz (Post 3990993)
Hey I have single pillar I can sell you. It has a Haltec double AFR gauge already installed. All you would need to get is the sensor.

Sent from my SM-G965U using Tapatalk
I appreciate it! But I already have a single gauge pillar with Defi oil pressure gauge. Just trying to figure out where to mount the Innovate afr/boost gauge. Probably here:
https://uploads.tapatalk-cdn.com/202...1db0f5d034.jpg

Sent from my SM-G955U using Tapatalk

Leingod 04-05-2021 06:43 PM
Fify

https://live.staticflickr.com/65535/...3894dbc1_c.jpg

redondoaveb 04-05-2021 06:54 PM
Quote:
Originally Posted by Leingod (Post 3990999)
That would be what his shifter looks like :nutswinger:

Leingod 04-05-2021 07:00 PM
Quote:
Originally Posted by redondoaveb (Post 3991003)
That would be what his shifter looks like :nutswinger:
When he's not gripping it, he's gotta be staring at one.

BettyZ 04-05-2021 07:11 PM
Quote:
Originally Posted by redondoaveb (Post 3991003)
That would be what his shifter looks like :nutswinger:
Got the Coolerworx idea from you, so, yes. :rofl2:

Hotrodz 04-05-2021 09:10 PM
Quote:
Originally Posted by BettyZ (Post 3990996)
I appreciate it! But I already have a single gauge pillar with Defi oil pressure gauge. Just trying to figure out where to mount the Innovate afr/boost gauge. Probably here:
https://uploads.tapatalk-cdn.com/202...1db0f5d034.jpg

Sent from my SM-G955U using Tapatalk
Cool! That will work.

Sent from my SM-G965U using Tapatalk


All times are GMT -5. The time now is 07:30 PM.
Page 15 of 16 « First 51314 15 16
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2