Custom Headlights (Do they still make them?)

bullitt5897

The difference in what the DIY job does and what I and 180 do are completely different. The build materials like LEDs and such are different along with sized wires and resistors. Follow the DIY and its a pretty permanent wiring job... I myself have incorporated some quick disconnects so that you can change your bulbs... Something to think about. I did Moses with cf elements original headlights at his home for him in the middle of winter.... Dam it was a few cold days.

If your looking for quality LEDs check out Oznium.com they are expensive but are the best pre built LEDs on the market for the DIYer. Remember for the higher end LEDs it requires modifications to the back of the landing strip to get them to sit flat. I will say that it takes a good 20+ hours to drill and shave down the backside with out f'ng it up! I have done several headlights and the hours stay the same... 20+ for both strips and the middle of the strip is the hardest!!! If your in the southeast and you need a quick turn around I can help any members who would like help. Also expect about $260-$400 for automotive paint and that's dependent on what you want done.

Mike

__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054