EVO-R 370Z Light weight Mirrors

sparky · 11-04-2012, 07:59 PM

Sub'd.

I'd like to see more detail photos and comments on quality and visibility before I give up heated powered mirrors. Looking forward to a review from whoever gets em first.

Jordo! · 11-13-2012, 02:18 PM

anxiously waiting start of the GB

VDC_OFF · 11-13-2012, 02:35 PM

any pics of the black base installed? Dan?

FireDan50 · 11-13-2012, 03:30 PM

I'm still waiting for them in the mail. I will do a full write-up and pic review as soon as I get them

DR_ · 11-13-2012, 04:49 PM

Please weigh them and the stock mirrors in your review.

tonythetiger · 11-13-2012, 04:56 PM

hope they dont have fitment issues like most other products...

GaleForce · 11-13-2012, 04:59 PM

Quote:

Originally Posted by tonythetiger

hope they dont have fitment issues like most other products...

I have this image of a rock being duct taped to the door.

EVOR · 11-13-2012, 06:55 PM

Humm... Don't know any issues. Since it is already on my Nismo Z. Loving it.

martin82 · 11-13-2012, 08:32 PM

GB please........!

EVOR · 11-16-2012, 01:37 AM

OK. Going put up GB tomorrow.

Jordo! · 11-16-2012, 06:59 PM

Quote:

Originally Posted by EVOR

OK. Going put up GB tomorrow.

GB List
#1 --> JORDO!

(Flat black base)<--

370ZNISMO#704 · 11-17-2012, 11:40 AM

Color options for mirrior and bases plssss.

EVOR · 11-17-2012, 07:13 PM

OK guys, here is the GB thread you all benn wating for! I got few in stock ready to go! Order them before you need to wait 10 days.

GB: EVO-R 370Z F1 light weight mirrors

FireDan50 · 11-27-2012, 04:41 PM

I just received mine in the mail today, but they look like they were a used piece or something because they had this yellow Evo-R sticker:

I definitely did not want this yellow sticker on my Pearl White Z because it did not match with anything on it....my attempt to take the sticker off resulted in this:

I definitely would like a partial refund or something for this problem. No one should have to buy these mirrors, receive them with a yellow sticker which is only on one side, have to take it off and then be left with a messed up paint job which I will have to correct.

Other than that, I have no other problems with these mirrors. I don't have a scale so I don't have the exact weight measurements, but I can definitely say that these are not heavier than the originals, but are not a dramatic weight saving piece. If you want to lighten your car, there are much more effective ways than changing mirrors.

Install was simple and took less than an hour for both sides.

Take out these three screws/bolts and then just pull/pop the door panel off.

With the door panel out of the way, you can just pop the plastic triangle piece from the inside/backside of the mirror, unplug the mirror, take off the three nuts holding the mirror, and then remove it.

At this point, you'll want to clean up the black residue from the bottom of where the stock mirror was. If you clean it good enough you can choose to use the black sticker which is provided to cover up that spot or not.

After that, then you can place the new mirror in and screw the three screws in. Be careful putting these screws in and do not force them when turning/screwing them in. The metal is soft and can the threads can be stripped if you're not careful.

If yours doesn't come with the sticker, then you don't have to repaint/repair the paint damage from peeling the sticker off :P Just need to adjust the mirrors and tighten them down. Hope this helps people a little.

Ni55anPat · 11-27-2012, 05:04 PM

EVO-R =

11-04-2012, 07:59 PM	#91 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 14	Sub'd. I'd like to see more detail photos and comments on quality and visibility before I give up heated powered mirrors. Looking forward to a review from whoever gets em first. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

11-13-2012, 02:18 PM	#92 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	anxiously waiting start of the GB __________________ Enjoy it. Destroy it. Last edited by Jordo!; 11-13-2012 at 03:05 PM.

11-13-2012, 02:35 PM	#93 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 16	any pics of the black base installed? Dan? __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

11-13-2012, 03:30 PM	#94 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	I'm still waiting for them in the mail. I will do a full write-up and pic review as soon as I get them VDC_OFF likes this.

11-13-2012, 04:56 PM	#96 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 192	hope they dont have fitment issues like most other products... iceman21_23 and GaleForce like this. __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

11-13-2012, 04:49 PM	#95 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 16	Please weigh them and the stock mirrors in your review.

11-13-2012, 06:55 PM	#98 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	Humm... Don't know any issues. Since it is already on my Nismo Z. Loving it. __________________ WWW.EVO-R.NET

11-13-2012, 08:32 PM	#99 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	GB please........!

11-16-2012, 01:37 AM	#100 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	OK. Going put up GB tomorrow. __________________ WWW.EVO-R.NET

11-17-2012, 11:40 AM	#102 (permalink)
370ZNISMO#704 Enthusiast Member Join Date: Nov 2010 Location: Seattle Posts: 466 Drives: Nismo10,EgH22,TSX04 Rep Power: 14	Color options for mirrior and bases plssss. __________________ 2010NISMO•305.9whp 250tq Osirus•STANCE GR+•and Camber & Toe bars•KICS R 20mm•VOSSEN CV3 20"-10.5x4•Stillen GENIII•AAM S-Line Nimso mid-pipe•CarbonSignal Sponsored car•EVOR F1mirrors•NST short shifter•Zspeed Nismo under tray.

11-17-2012, 07:13 PM	#103 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	OK guys, here is the GB thread you all benn wating for! I got few in stock ready to go! Order them before you need to wait 10 days. GB: EVO-R 370Z F1 light weight mirrors __________________ WWW.EVO-R.NET

11-27-2012, 04:41 PM	#104 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	I just received mine in the mail today, but they look like they were a used piece or something because they had this yellow Evo-R sticker: I definitely did not want this yellow sticker on my Pearl White Z because it did not match with anything on it....my attempt to take the sticker off resulted in this: I definitely would like a partial refund or something for this problem. No one should have to buy these mirrors, receive them with a yellow sticker which is only on one side, have to take it off and then be left with a messed up paint job which I will have to correct. Other than that, I have no other problems with these mirrors. I don't have a scale so I don't have the exact weight measurements, but I can definitely say that these are not heavier than the originals, but are not a dramatic weight saving piece. If you want to lighten your car, there are much more effective ways than changing mirrors. Install was simple and took less than an hour for both sides. Take out these three screws/bolts and then just pull/pop the door panel off. With the door panel out of the way, you can just pop the plastic triangle piece from the inside/backside of the mirror, unplug the mirror, take off the three nuts holding the mirror, and then remove it. At this point, you'll want to clean up the black residue from the bottom of where the stock mirror was. If you clean it good enough you can choose to use the black sticker which is provided to cover up that spot or not. After that, then you can place the new mirror in and screw the three screws in. Be careful putting these screws in and do not force them when turning/screwing them in. The metal is soft and can the threads can be stripped if you're not careful. If yours doesn't come with the sticker, then you don't have to repaint/repair the paint damage from peeling the sticker off :P Just need to adjust the mirrors and tighten them down. Hope this helps people a little. VDC_OFF likes this.

11-27-2012, 05:04 PM	#105 (permalink)
Ni55anPat A True Z Fanatic Join Date: Mar 2010 Location: Chicago Posts: 1,833 Drives: Zed Rep Power: 18	EVO-R = GaleForce likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Competition Clutch Light Weight Flywheel	Lunar-Eclipse	Parts for sale (Private Classifieds)	9	08-27-2012 02:58 PM
Light weight wheels	Zeto	Wheels & Tires	25	03-30-2012 11:21 AM
Stillen Light weight Pulleys for my Z !! YES OR NO?????	370zjames	Engine & Drivetrain	14	01-19-2012 06:17 PM
AMS 370Z/G37 Light Weight Crank Pulley Price Update	Dustin@Z1	Drivetrain/Engine	1	11-12-2009 09:52 AM