Start to a new bumper & diffuser.. Maybe.

cc370z · 06-29-2012, 10:50 AM

I would like your feed back (good & bad). I bought a used bumper and thought I would try something different and make own diffuser. I cut out part of the bumper to start out and now need ideas from members that have some knowledge about diffusers.

iceman21_23 · 06-29-2012, 10:52 AM

bigger picture cant tell at all in that one

cc370z · 06-29-2012, 11:03 AM

I'm doing this from my phone. Let me try this a different way. Is this a better picture? ImageUploadedByTapatalk1340985810.417687.jpg

iceman21_23 · 06-29-2012, 11:33 AM

yea thats a little better but all i see is that you cut the diffuser area off. but im in for final results

MattP725 · 06-29-2012, 11:51 AM

Looks pretty bad IMO and what's going on with those lights.

ohmikegod · 06-29-2012, 12:09 PM

What lights?

simota1 · 06-29-2012, 12:30 PM

maybe cut out the rest of the bottom bumper off... like follow the curve line that goes from end to end of the bumper....

i think that would look cleaner than the boxy cut

cc370z · 06-29-2012, 12:55 PM

Quote:

Originally Posted by MattP725

Looks pretty bad IMO and what's going on with those lights.

I removed the lights while I'm taking the bumper on and off.

cc370z · 06-29-2012, 12:58 PM

I'm looking to fill in the cut out with a diffuser. I've got sheets of abs plastics (I used to have a side business making heat shields for intakes). I was going to make a diffuser from that and then have it wrapped in carbon fiber. I was hoping it could be functional.

simota1 · 06-29-2012, 01:18 PM

nice dood ^^^^ that would be bad ***!!!!

Waiz · 06-29-2012, 01:55 PM

lol at the lights question!

Looks like someone has some extra time on their hands

couple of ideas for you Chad:

I would go with trying to make something similar to this JP version:

Chargespeed style:

Nearly full undertray versions

DarkJak · 06-29-2012, 02:30 PM

A fuller diffuser would be hard with your exhaust setup since your canisters are taking up a lot of the space where the undertray would go. Gotta give you props for having the balls to cut your bumper like that though.

Waiz · 06-29-2012, 03:02 PM

You going to mock it up in cardboard first Chad?

Apoc370z · 06-29-2012, 03:06 PM

I dont know.. Isnt it easier to just make one that goes on top of the stock diffuser area and work on the under trays?

You are brave to cut your bumper first without any plans

anthonyy · 06-29-2012, 03:27 PM

Quote:

Originally Posted by Waizzz

lol at the lights question!

Looks like someone has some extra time on their hands

couple of ideas for you Chad:

I would go with trying to make something similar to this JP version:

Chargespeed style:

Nearly full undertray versions

These are some solid ideas...
Have fun with it!

06-29-2012, 10:52 AM	#2 (permalink)
iceman21_23 Track Member Join Date: Jan 2009 Location: league city, tx Posts: 757 Drives: 09' Solid Red 370z Rep Power: 17	bigger picture cant tell at all in that one __________________ Zele front bumper cf front lip, Seibon TS Hood, Work GS2, Ings+1 side skirts Takeda CAI Litespeed Exhaust

06-29-2012, 11:33 AM	#4 (permalink)
iceman21_23 Track Member Join Date: Jan 2009 Location: league city, tx Posts: 757 Drives: 09' Solid Red 370z Rep Power: 17	yea thats a little better but all i see is that you cut the diffuser area off. but im in for final results __________________ Zele front bumper cf front lip, Seibon TS Hood, Work GS2, Ings+1 side skirts Takeda CAI Litespeed Exhaust

06-29-2012, 12:30 PM	#7 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	maybe cut out the rest of the bottom bumper off... like follow the curve line that goes from end to end of the bumper.... i think that would look cleaner than the boxy cut __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

06-29-2012, 12:58 PM	#9 (permalink)
cc370z Enthusiast Member Join Date: Jan 2010 Location: AZ Posts: 467 Drives: 09 370z Rep Power: 15	I'm looking to fill in the cut out with a diffuser. I've got sheets of abs plastics (I used to have a side business making heat shields for intakes). I was going to make a diffuser from that and then have it wrapped in carbon fiber. I was hoping it could be functional. Last edited by cc370z; 06-29-2012 at 01:01 PM.

06-29-2012, 01:18 PM	#10 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	nice dood ^^^^ that would be bad *!!!! __________________ TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/**

06-29-2012, 11:03 AM	#3 (permalink)
cc370z Enthusiast Member Join Date: Jan 2010 Location: AZ Posts: 467 Drives: 09 370z Rep Power: 15	I'm doing this from my phone. Let me try this a different way. Is this a better picture? ImageUploadedByTapatalk1340985810.417687.jpg

06-29-2012, 11:51 AM	#5 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Looks pretty bad IMO and what's going on with those lights.

06-29-2012, 12:09 PM	#6 (permalink)
ohmikegod Base Member Join Date: Oct 2011 Location: San Jose Age: 34 Posts: 96 Drives: 2012 PW 370z S/T/N Rep Power: 13	What lights?

06-29-2012, 01:55 PM	#11 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	lol at the lights question! Looks like someone has some extra time on their hands couple of ideas for you Chad: I would go with trying to make something similar to this JP version: Chargespeed style: Nearly full undertray versions Last edited by Waiz; 06-29-2012 at 01:58 PM.

06-29-2012, 02:30 PM	#12 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	A fuller diffuser would be hard with your exhaust setup since your canisters are taking up a lot of the space where the undertray would go. Gotta give you props for having the balls to cut your bumper like that though.

06-29-2012, 03:02 PM	#13 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	You going to mock it up in cardboard first Chad?

06-29-2012, 03:06 PM	#14 (permalink)
Apoc370z A True Z Fanatic Join Date: May 2011 Location: Orange County, CA Posts: 1,001 Drives: 2011 GM z34 Rep Power: 15	I dont know.. Isnt it easier to just make one that goes on top of the stock diffuser area and work on the under trays? You are brave to cut your bumper first without any plans

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimara Rear Diffuser VS. EVO-R NEW Diffuser	KB2	Exterior & Interior	12	02-11-2014 08:03 PM
Car will start sometimes and not start, need advice	aragona7	Nissan 370Z General Discussions	11	03-08-2012 10:23 PM
[FOR SALE] Evo-R CF Diffuser & Front Upper Bumper Piece	AllForTheCash	Parts for sale (Private Classifieds)	11	05-24-2011 03:59 PM
cold start/push start	chops	Nissan 370Z General Discussions	21	02-14-2011 03:40 AM