How to disconnect the Bosch modulator?

wdkwang · 05-22-2012, 10:58 PM

Not sure if this is the right place to post it but...

I'm getting more aggressive with drifting now and would like to see how the car acts without the ABLS engaging that people have been mentioning about. From what I understand, it's a cable that can be disconnected right in front of the e-brake handle. When I popped off the cup holder, there seems to be some plastics in the way so I'm not really sure where I'm supposed to be pulling. If anyone could just give me some incite and/or circle the area where I'm supposed to pull from, it'll be appreciated. Thanks

Picture was taken from the passenger side:

wdkwang · 05-22-2012, 10:59 PM

Revgasm · 05-31-2012, 02:16 AM

I'm also wondering about this. Any Feed Back?

Huck · 05-31-2012, 02:25 AM

The easiest way to get to it is to take your whole middle console out. Two screws at the back behind your seats on either side of the console, and then two screws in the dash just In front of your stick, IRCC. You can see the Bosch box plainly after that, and see what cable you need to pull where.

Sent from my iPhizzle using magic and new fangled science stuff

Revgasm · 05-31-2012, 01:10 PM

is it a plug that can be disconnected?

Revgasm · 06-03-2012, 07:59 PM

So, i disconnected the wheel speed sensor on the Right Rear Wheel (easiest to get too)

I'm assuming it disabled all of the stability controls since all the indicator lights were illuminated on the gauge cluster.

Took the car to a drift event yesterday, all i could say is the car was a world of difference.

When i get a chance i'll try to compare what i did vs. disconnecting the Bosch Sensor.

Baer383 · 06-03-2012, 08:17 PM

Quote:

Originally Posted by Revgasm

So, i disconnected the wheel speed sensor on the Right Rear Wheel (easiest to get too)

I'm assuming it disabled all of the stability controls since all the indicator lights were illuminated on the gauge cluster.

Took the car to a drift event yesterday, all i could say is the car was a world of difference.

When i get a chance i'll try to compare what i did vs. disconnecting the Bosch Sensor.

I would like to here more on this.

Subbed

wdkwang · 06-03-2012, 09:01 PM

omg yes please do

wdkwang · 06-04-2012, 01:42 AM

i dunno bout u guys but all the sliding around has thrown off my rear right camber. it looks like it's increased by 1.5-2 degrees camber

Revgasm · 06-04-2012, 10:53 PM

It's always a possibility for alignments to change, Hitting uneven areas can do it especially while drifting. Getting it on alignment rack to see what's really going on

wdkwang · 08-26-2013, 03:40 AM

I disconnecte the cable tonight and it disables vdc and that slip control since those things light up on the cluster. ABS still works though which is good. The car's electronics doesn't interfere when sliding now. Car finally has a sense of old school rawness without I all the gizmos getting in the way. I'll test out of a standing/rolling burnout is also possible

Z&I · 12-19-2013, 01:47 PM

Quote:

Originally Posted by wdkwang

I disconnecte the cable tonight and it disables vdc and that slip control since those things light up on the cluster. ABS still works though which is good. The car's electronics doesn't interfere when sliding now. Car finally has a sense of old school rawness without I all the gizmos getting in the way. I'll test out of a standing/rolling burnout is also possible

How did you make out with your standing burnout ???
Did it work ?
I'm looking for the best/easiest way of 'warming' the tires up at the dragstrip.

Also - Do the Brake Lights still work with the Bosch Box disconnected in this fashion ?

Thanks,

Bob

SouthArk370Z · 12-19-2013, 01:55 PM

Quote:

Originally Posted by Z&I

I'm looking for the best/easiest way of 'warming' the tires up at the dragstrip.

IIRC, pulling the brake light fuse is all that is required. Several threads on this site that discuss it.

Quote:

Originally Posted by Z&I

Also - Do the Brake Lights still work with the Bosch Box disconnected in this fashion ?

Yes. The yaw sensor is not in the brake light circuit.

wdkwang · 12-19-2013, 02:04 PM

Quote:

Originally Posted by Z&I

How did you make out with your standing burnout ???
Did it work ?
I'm looking for the best/easiest way of 'warming' the tires up at the dragstrip.

Also - Do the Brake Lights still work with the Bosch Box disconnected in this fashion ?

Thanks,

Bob

Unfortunately it doesn't take care of the standing burnout issue. You still need to disconnect the brake lamp fuse. Very annoying.
The brake lights still work with the Bosch disconnected

Z&I · 12-19-2013, 02:22 PM

Quote:

Originally Posted by SouthArk370Z

IIRC, pulling the brake light fuse is all that is required. Several threads on this site that discuss it.

Yes. The yaw sensor is not in the brake light circuit.

Thanks ... Have been using the search feature and have located these threads and have stumbled on some tantalizing pieces of info that I am now digging deeper in to.
I like things simple and easy.

So far:

Up Rev pre-tune that deals with the ABLS issue for drag racing ... have contacted Up Rev and they have requested the P/N of my computer...promising...

Bosch Modulator and it's functions/effects

'Stop Lamp' fuse (at least that is what my car has it labeled as)

Drag Radials and associated wheels ... limits - pro's and con's

GTM traction control

Making progress ... will continue to use the Search button till it breaks...

Nothin' beats hands on knowledge tho' from those who have done it.

So far have gotten my time down to 12.4 @ 116 (on cold tires) as a result of tapping in to the knowledge base here..

Would like to get in to the 11's

Bob

05-22-2012, 10:59 PM	#2 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	__________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

05-31-2012, 02:16 AM	#3 (permalink)
Revgasm Base Member Join Date: Aug 2011 Location: Chicago Posts: 9 Drives: Nissan 180sx Rep Power: 13	I'm also wondering about this. Any Feed Back? __________________ Riskydevil.com Junkhouse.us/blog Revgasm.wordpress.com

05-31-2012, 02:25 AM	#4 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	The easiest way to get to it is to take your whole middle console out. Two screws at the back behind your seats on either side of the console, and then two screws in the dash just In front of your stick, IRCC. You can see the Bosch box plainly after that, and see what cable you need to pull where. Sent from my iPhizzle using magic and new fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

05-31-2012, 01:10 PM	#5 (permalink)
Revgasm Base Member Join Date: Aug 2011 Location: Chicago Posts: 9 Drives: Nissan 180sx Rep Power: 13	is it a plug that can be disconnected? __________________ Riskydevil.com Junkhouse.us/blog Revgasm.wordpress.com

06-03-2012, 07:59 PM	#6 (permalink)
Revgasm Base Member Join Date: Aug 2011 Location: Chicago Posts: 9 Drives: Nissan 180sx Rep Power: 13	So, i disconnected the wheel speed sensor on the Right Rear Wheel (easiest to get too) I'm assuming it disabled all of the stability controls since all the indicator lights were illuminated on the gauge cluster. Took the car to a drift event yesterday, all i could say is the car was a world of difference. When i get a chance i'll try to compare what i did vs. disconnecting the Bosch Sensor. __________________ Riskydevil.com Junkhouse.us/blog Revgasm.wordpress.com

06-03-2012, 09:01 PM	#8 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	omg yes please do __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

06-04-2012, 01:42 AM	#9 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	i dunno bout u guys but all the sliding around has thrown off my rear right camber. it looks like it's increased by 1.5-2 degrees camber __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

06-04-2012, 10:53 PM	#10 (permalink)
Revgasm Base Member Join Date: Aug 2011 Location: Chicago Posts: 9 Drives: Nissan 180sx Rep Power: 13	It's always a possibility for alignments to change, Hitting uneven areas can do it especially while drifting. Getting it on alignment rack to see what's really going on __________________ Riskydevil.com Junkhouse.us/blog Revgasm.wordpress.com

08-26-2013, 03:40 AM	#11 (permalink)
wdkwang Track Member Join Date: Nov 2010 Location: N/A Posts: 899 Drives: slidewayz Rep Power: 20	I disconnecte the cable tonight and it disables vdc and that slip control since those things light up on the cluster. ABS still works though which is good. The car's electronics doesn't interfere when sliding now. Car finally has a sense of old school rawness without I all the gizmos getting in the way. I'll test out of a standing/rolling burnout is also possible __________________ Powerhouse Amuse \| K&N Typhoon Intakes \| MotorDyne ART Pipes \| Borla Catback Exhaust \| B&M Short Shifter \| Intake Ducts \| Ichiba 25mm F/R Spacers \| Carbon Fiber Interior Vinyl Wrap \| Tints \| 10000k HIDs \| Vtak, yo!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Systems to reset after battery disconnect	binto100	Nissan 370Z General Discussions	8	05-09-2014 01:13 AM
Battery Disconnect Question	BG370z	DIY Section (Do-It-Yourself)	5	02-26-2012 11:02 AM
Speed Sensor Disconnect for Nav Unit	BernieB	DIY Section (Do-It-Yourself)	5	02-02-2011 08:10 PM
what to reset after battery disconnect?	ncheung85	DIY Section (Do-It-Yourself)	6	07-10-2010 07:36 PM