B-pillar install question...

JAYNO20 · 04-16-2012, 07:06 PM

Recently mine broke, I have a new one on the way, but the 2 white clips on the bottom side are still on the car. How do they come out? Just pull straight out or what? I don't want to break these things...

JAYNO20 · 04-17-2012, 12:05 PM

Bump

nepali · 04-17-2012, 12:12 PM

Quote:

Originally Posted by JAYNO20

Recently mine broke, I have a new one on the way, but the 2 white clips on the bottom side are still on the car. How do they come out? Just pull straight out or what? I don't want to break these things...

DIY: SpawnAero CF B-Pillars

TerribleONE · 04-17-2012, 12:15 PM

repped ^

nepali · 04-17-2012, 12:20 PM

Quote:

Originally Posted by TerribleONE

repped ^

Thank you!

JAYNO20 · 04-17-2012, 02:57 PM

That helps a good bit but it doesn't say if those white clips just pull straight out or not... (Not that I saw anyway). Does anyone know if those clips just pull straight out?

USMCASA · 04-17-2012, 04:17 PM

^yes they do. if you see two exposed holes don't pull out the surrounding white bases. thats where the clip that is on the bpillar clips into. there is 3 spots that hold it in place... not much to hold it on but it does.

JAYNO20 · 04-23-2012, 01:40 PM

Just got a new b pillar and put it on today but its not sitting flush against the car like the passenger side... any idea why? It popped in in 3 different places...

JAYNO20 · 04-24-2012, 12:51 PM

Bump... any ideas?

kenchan · 04-24-2012, 01:43 PM

i dont know, but can you sandwich 3M trim mounting tape to minimize the gap?

MattP725 · 04-24-2012, 02:07 PM

Remove and remount... it should sit flush... perhaps one of your plastic tabs slipped out of the mount.

vividracing · 04-24-2012, 03:53 PM

Make sure all of your clips are seated properly, not bent/jammed/otherwise messed up.

USMCASA · 04-24-2012, 04:03 PM

please take pics for us. i can better help when i see stuff.

JAYNO20 · 04-24-2012, 04:11 PM

Quote:

Originally Posted by USMCASA

please take pics for us. i can better help when i see stuff.

Lol I'll get some pics, I hope something is holding it up cause its definitely not sitting as tight as the passenger side.

USMCASA · 04-24-2012, 05:20 PM

^my only thoughts as of now is a possible bad anchor clip, the part that holds the clip from the back of the bpillar to the metal of the car more tightly. might be the reason the original let go to begin with but will need pics to confirm.

04-16-2012, 07:06 PM	#1 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	B-pillar install question... Recently mine broke, I have a new one on the way, but the 2 white clips on the bottom side are still on the car. How do they come out? Just pull straight out or what? I don't want to break these things...

04-17-2012, 12:05 PM	#2 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	Bump __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

04-17-2012, 12:15 PM	#4 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	repped ^ __________________ 638WHP 541WTQ @ 13.5PSI Build thread

04-17-2012, 02:57 PM	#6 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	That helps a good bit but it doesn't say if those white clips just pull straight out or not... (Not that I saw anyway). Does anyone know if those clips just pull straight out? __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

04-23-2012, 01:40 PM	#8 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	Just got a new b pillar and put it on today but its not sitting flush against the car like the passenger side... any idea why? It popped in in 3 different places... __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1 Last edited by JAYNO20; 04-23-2012 at 03:11 PM.

04-17-2012, 04:17 PM	#7 (permalink)
USMCASA A True Z Fanatic Join Date: Nov 2009 Location: NC Posts: 1,152 Drives: 09 370z CY M6 Rep Power: 17	^yes they do. if you see two exposed holes don't pull out the surrounding white bases. thats where the clip that is on the bpillar clips into. there is 3 spots that hold it in place... not much to hold it on but it does.

04-24-2012, 12:51 PM	#9 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	Bump... any ideas? __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

04-24-2012, 01:43 PM	#10 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	i dont know, but can you sandwich 3M trim mounting tape to minimize the gap?

04-24-2012, 02:07 PM	#11 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 16	Remove and remount... it should sit flush... perhaps one of your plastic tabs slipped out of the mount.

04-24-2012, 03:53 PM	#12 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	Make sure all of your clips are seated properly, not bent/jammed/otherwise messed up. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

04-24-2012, 04:03 PM	#13 (permalink)
USMCASA A True Z Fanatic Join Date: Nov 2009 Location: NC Posts: 1,152 Drives: 09 370z CY M6 Rep Power: 17	please take pics for us. i can better help when i see stuff.

04-24-2012, 05:20 PM	#15 (permalink)
USMCASA A True Z Fanatic Join Date: Nov 2009 Location: NC Posts: 1,152 Drives: 09 370z CY M6 Rep Power: 17	^my only thoughts as of now is a possible bad anchor clip, the part that holds the clip from the back of the bpillar to the metal of the car more tightly. might be the reason the original let go to begin with but will need pics to confirm.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quote For Install Question	happytheman	Nissan 370Z General Discussions	11	02-04-2012 04:28 PM
Question on CF Fang INSTALL	wangin05	Exterior & Interior	2	07-24-2011 11:54 AM
HFC install/ PB Blaster question	omgZ	Intake/Exhaust	10	05-26-2011 02:03 PM
Taillight Install Question?	Pelican170	Exterior & Interior	6	11-03-2010 08:46 AM
noob question on sub/amp install.	Snakes709	Audio & Video	2	03-20-2010 03:41 PM