Oil gauge to replace the clock

Ages · 11-29-2011, 11:18 AM

What's up , I was wandering if anyone has found a gauge that looks good and can fit in that third pod with the clock. Also will removing that clock mess with the main info center.

Ps. I used the search and nothing poped up><

007MI6 · 11-29-2011, 11:45 AM

Just a few from a quick search. There's a lot of discussion on that here. Search is your friend.

Clock removal-gauge replacement
3 gauges on dashboard
Just swapped the triple meter OEM gauge

Ages · 11-29-2011, 06:56 PM

Thanks for the links maybe i was too vague on my search attempts><

kellyefields · 11-29-2011, 07:15 PM

you cannot replace just one of the guages because they are all connected just look in my photo albums and you will see what I mean. also you will have to remove the entire dash to take it out. Trust me I have done just that.

007MI6 · 11-29-2011, 07:47 PM

Quote:

Originally Posted by kellyefields

you cannot replace just one of the guages because they are all connected just look in my photo albums and you will see what I mean. also you will have to remove the entire dash to take it out. Trust me I have done just that.

Or do what JP_370Z did and just meticulously dismantle each pod in place and throw away the debris as you go.

007MI6 · 11-29-2011, 07:49 PM

Quote:

Originally Posted by Ages

Thanks for the links maybe i was too vague on my search attempts><

Sa right! Took me a little time to learn how to finesse the search engine to give me what I wanted.

kellyefields · 12-04-2011, 09:06 PM

Here is what I did for guage replacement using prosport guages and removing the dash completely. from left to right I have boost , oil pressure, oil temp in the dash that I can change from red to blue to white depending on my mood and in the glove box I have Air Fuel and exhaust temp. removing the dash is not all that hard following the service manual and taking your time. took me about 2 hrs going really slow to remove it and then only 45 mins to replace it and no rattles or leftover parts except for the old guage cluster. More pics are in my profile album.

martin82 · 12-27-2011, 06:32 PM

great looking set of gauges. Too bad we can't remove the gauges easier. I found this online for the V1

martin82 · 12-27-2011, 06:34 PM

Stealth Valentine One (V1) install in 52mm gauge - NASIOC

kellyefields · 12-27-2011, 07:05 PM

To be honest removing the dash to get to the guages is really not that bad. takes about 2 hours to remove when I did it. For those that want the stock look and wants to use the stock silver rings you need to get 52mm anything larger will not work there.

martin82 · 12-27-2011, 07:09 PM

thanks, one of these days I'll look into it when I got nothing better to do. I'd really like to get the V1 display on one of the gauges even if its modified with LED's or something.

Ages · 12-27-2011, 07:14 PM

Hey Kellys what gauges are those as in what model and how close to the stock speedo/ tack are they in style? Hard to tell since pic is blurrd . Can you take a pic showing all 5?..... Also I am gonna get them new lifts you made. Nice work.

kellyefields · 12-27-2011, 07:20 PM

Quote:

Originally Posted by Ages

Hey Kellys what gauges are those as in what model and how close to the stock speedo/ tack are they in style? Hard to tell since pic is blurrd . Can you take a pic showing all 5?..... Also I am gonna get them new lifts you made. Nice work.

Here is a little better pic. I will take more during the day so you can see them better. but they are prosport premium halo series. They match the dash speedo very well. they have the amber ring around them just like the speedo and such.
As far as the hood lifts I have only about 6 left right now so if you want a set you better hurry.

blak max · 07-03-2015, 06:21 PM

52 or 60 gauges?

cooltoy · 07-03-2015, 06:44 PM

20 11.

11-29-2011, 11:18 AM	#1 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 13	Oil gauge to replace the clock What's up , I was wandering if anyone has found a gauge that looks good and can fit in that third pod with the clock. Also will removing that clock mess with the main info center. Ps. I used the search and nothing poped up><

11-29-2011, 11:45 AM	#2 (permalink)
007MI6 Track Member Join Date: May 2011 Location: Corpus Christi, TX Age: 44 Posts: 703 Drives: Audrey Rep Power: 14	Just a few from a quick search. There's a lot of discussion on that here. Search is your friend. Clock removal-gauge replacement 3 gauges on dashboard Just swapped the triple meter OEM gauge __________________ 2011 370Z Touring+Sport Coupe BLK Int\|\|M6\|\|Navigation\|\|Illuminated Door Sills\|\|GoMiniGo LPB

11-29-2011, 07:15 PM	#4 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 47 Posts: 1,149 Drives: Supercharged Rep Power: 16	you cannot replace just one of the guages because they are all connected just look in my photo albums and you will see what I mean. also you will have to remove the entire dash to take it out. Trust me I have done just that. __________________ MY 2009 SC BUILD.

12-04-2011, 09:06 PM	#7 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 47 Posts: 1,149 Drives: Supercharged Rep Power: 16	Here is what I did for guage replacement using prosport guages and removing the dash completely. from left to right I have boost , oil pressure, oil temp in the dash that I can change from red to blue to white depending on my mood and in the glove box I have Air Fuel and exhaust temp. removing the dash is not all that hard following the service manual and taking your time. took me about 2 hrs going really slow to remove it and then only 45 mins to replace it and no rattles or leftover parts except for the old guage cluster. More pics are in my profile album. DYNAZOR, WI_Hedgehog and nasm like this. __________________ MY 2009 SC BUILD.

12-27-2011, 06:34 PM	#9 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	Stealth Valentine One (V1) install in 52mm gauge - NASIOC Last edited by martin82; 12-27-2011 at 06:52 PM.

11-29-2011, 06:56 PM	#3 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 13	Thanks for the links maybe i was too vague on my search attempts><

12-27-2011, 06:32 PM	#8 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	great looking set of gauges. Too bad we can't remove the gauges easier. I found this online for the V1

12-27-2011, 07:05 PM	#10 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 47 Posts: 1,149 Drives: Supercharged Rep Power: 16	To be honest removing the dash to get to the guages is really not that bad. takes about 2 hours to remove when I did it. For those that want the stock look and wants to use the stock silver rings you need to get 52mm anything larger will not work there. __________________ MY 2009 SC BUILD.

12-27-2011, 07:09 PM	#11 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	thanks, one of these days I'll look into it when I got nothing better to do. I'd really like to get the V1 display on one of the gauges even if its modified with LED's or something.

12-27-2011, 07:14 PM	#12 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 13	Hey Kellys what gauges are those as in what model and how close to the stock speedo/ tack are they in style? Hard to tell since pic is blurrd . Can you take a pic showing all 5?..... Also I am gonna get them new lifts you made. Nice work. __________________ F.I.CBE\|F.I.HFC\|20/25mm Z1 Spacers\|CS TypeN Wing(cf)\|CS Diffuser (cf)\|EvoR Fangs(cf)\|EvoR Type2 Front Lip\|Evor Side Blades\|Stillen Gen3\|JDM Fog\|

07-03-2015, 06:21 PM	#14 (permalink)
blak max Enthusiast Member Join Date: Apr 2014 Location: CFL Posts: 476 Drives: Ls swapped 370z Rep Power: 3369	52 or 60 gauges? __________________ LS 370Z ~ Fueled Racing ~ CSF radiator ~ Vis Racing ~ Braum Racing ~ SPLparts~ Vossen~Odessey Battery

07-03-2015, 06:44 PM	#15 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	20 11. Memphis370Z and AntiVenom like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clock removal-gauge replacement	bucketman	Exterior & Interior	49	01-01-2012 11:08 AM
Can you change the time in the clock gauge?	Stosh Rickles	Exterior & Interior	21	11-20-2011 10:27 AM
distorted clock in gauge pod?	chops	Exterior & Interior	6	05-09-2011 06:36 PM
STRI Oil Pressure Gauge... Amber 52mm to replace your clock !	travisjb	Parts for sale (Private Classifieds)	33	03-09-2010 06:02 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 10:28 PM