Just swapped the triple meter OEM gauge

Girald · 01-22-2018, 05:59 PM

As to the OEM gauge mods: No - Unless you pull out the whole dash... I just took out my gauges via elbow grease and a bit of dremel action... You will end up with aprox 100 pieces +/-... Theres 2 solid plastic long bits (with the gauge backing) with circuit boards sandwich'ed in between. I just assaisnated the oem gauges.. Now its time for test fit on the BF gauges..

Lemers · 08-20-2011, 09:18 AM

F'n awesome dude. Great work

didymus · 08-20-2011, 11:26 AM

Sweeet

DIGItonium · 08-20-2011, 04:38 PM

Sweet mod! I'm waiting to get my new gauges in this Monday as well. I'm not sure how the tech is going to approach the installation, though. I don't care if he breaks the old one apart lol. Looking back, i wish I got the 4-in-1 gauges from Depo. It has an analog gauge with OLED display for 3 other parameters like voltage, water temp, etc., depending on the selected model.

V8Killer · 04-10-2013, 12:15 PM

It has been a couple years so how is the modification holding up?

Boosted Performance · 02-19-2018, 10:00 PM

^^^In other words, this is not as easy as the OP had done it?

I am looking at adding gauges, and would really like to go with the OEM look, but if it is a nightmare, I would steer away from it.

nasm · 02-13-2021, 11:04 AM

The best gauges project I saw so far, amazing, well done.
I really wanted to replace the clock gauge with oil pressure or trans-temp (A7).
Could you please advise in case I want to replace the clock gauge only, which product you recommend to match the others?

Thanks,
NASM

Rusty · 02-13-2021, 11:18 AM

Quote:

Originally Posted by nasm

The best gauges project I saw so far, amazing, well done.
I really wanted to replace the clock gauge with oil pressure or trans-temp (A7).
Could you please advise in case I want to replace the clock gauge only, which product you recommend to match the others?

Thanks,
NASM

You just can't do one gauge. You have to do all 3 gauges. Under the dash. The gauges are really just one piece.

nasm · 02-13-2021, 12:06 PM

Quote:

Originally Posted by Rusty

You just can't do one gauge. You have to do all 3 gauges. Under the dash. The gauges are really just one piece.

Ok, got it, I just saw a video on YouTube. However, it is not clear yet from where to buy them, and which model ..

I know it is Defi but is there any recommended place (online) to get them from??

And since I am going to replace them all, then I would go for engine oil temp, battery, trans-oil temp.

Thanks,
Nasm

Sent from my SM-G980F using Tapatalk

Rusty · 02-13-2021, 12:21 PM

Quote:

Originally Posted by nasm

Ok, got it, I just saw a video on YouTube. However, it is not clear yet from where to buy them, and which model ..

I know it is Defi but is there any recommended place (online) to get them from??

And since I am going to replace them all, then I would go for engine oil temp, battery, trans-oil temp.

Thanks,
Nasm

Sent from my SM-G980F using Tapatalk

I went with SpeedHut gauges. Oil pressure, Water temp, and Diff temp. Have mine installed in the cubby hole in the dash.

The switches are for the Yaw sensor, Diff cooler pump, Diff cooler fan.

nasm · 02-13-2021, 12:38 PM

Quote:

Originally Posted by Rusty

I went with SpeedHut gauges. Oil pressure, Water temp, and Diff temp. Have mine installed in the cubby hole in the dash.

The switches are for the Yaw sensor, Diff cooler pump, Diff cooler fan.

Excellent ...
Will visit their website ..
Appreciated

Sent from my SM-G980F using Tapatalk

01-22-2018, 05:59 PM	#1 (permalink)
Girald Base Member Join Date: Jun 2017 Location: Denver Posts: 136 Drives: 15' 370z SpTech 6MT Rep Power: 3364	As to the OEM gauge mods: No - Unless you pull out the whole dash... I just took out my gauges via elbow grease and a bit of dremel action... You will end up with aprox 100 pieces +/-... Theres 2 solid plastic long bits (with the gauge backing) with circuit boards sandwich'ed in between. I just assaisnated the oem gauges.. Now its time for test fit on the BF gauges.. __________________ AAM tt'ed // Soon: Moving back to the East Coast Last edited by Girald; 01-22-2018 at 06:03 PM.

08-20-2011, 09:18 AM	#2 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 53	F'n awesome dude. Great work __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

08-20-2011, 04:38 PM	#4 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	Sweet mod! I'm waiting to get my new gauges in this Monday as well. I'm not sure how the tech is going to approach the installation, though. I don't care if he breaks the old one apart lol. Looking back, i wish I got the 4-in-1 gauges from Depo. It has an analog gauge with OLED display for 3 other parameters like voltage, water temp, etc., depending on the selected model. __________________

04-10-2013, 12:15 PM	#5 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 17	It has been a couple years so how is the modification holding up? __________________ "Punch" Too much to list and a baby shot of nitrous....

02-19-2018, 10:00 PM	#6 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3383	^^^In other words, this is not as easy as the OP had done it? I am looking at adding gauges, and would really like to go with the OEM look, but if it is a nightmare, I would steer away from it. nasm likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

08-20-2011, 11:26 AM	#3 (permalink)
didymus Track Member Join Date: Jun 2009 Location: Providence / Boston Posts: 564 Drives: 280 / 370Z Rep Power: 307	Sweeet

02-13-2021, 11:04 AM	#7 (permalink)
nasm Base Member Join Date: Nov 2020 Location: Dubai Posts: 129 Drives: 370z Sport A7 2014 Rep Power: 5	The best gauges project I saw so far, amazing, well done. I really wanted to replace the clock gauge with oil pressure or trans-temp (A7). Could you please advise in case I want to replace the clock gauge only, which product you recommend to match the others? Thanks, NASM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who has swapped to the 4.08 gear?	Big J	Engine & Drivetrain	16	11-27-2012 02:21 PM
triple gauge covers	soldknow	Exterior & Interior	5	01-30-2011 12:03 PM
Custom triple meter modification...	DIGItonium	Exterior & Interior	23	11-18-2010 04:07 PM
370z Nismo version instrument meter & gauge	deben	Exterior & Interior	0	10-01-2010 09:51 AM
Tsb: 2009-2010 nissan 370z coupe, 370z roadster; triple meter clock setting procedure	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 10:21 PM