Hexxis 3D CF film

TreeSemdyZee

The texture feels like it looks. If that makes sense. It is not flat if that helps.
I'm a novice too. This was the first time I had done anything like this.
Remember. This isn't real Carbon Fiber. It's vinyl.
I used 3M Adhesion Promoter to make the surface tackier so that the bond was better. I used a plastic putty knife as a squeegee. I also used a heat gun to soften the material and it also helps it form around the edges of the lid.
When you take the covering off of the lid, there is a "trough" that made space for the stitched seam. I filled it in with Bondo (also my first time).

Baer383

Where did you get the Carbon Fiber wrap?

__________________
2013 ZL1

754 rwhp 747 rwtq

christian370z

That's perfect, thanks for the explanation. I especially like the door panel switch plates, I think I will give that a try now that you had success.

__________________
-320whp / 259wftlbs-
SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob