CarbonSignal Interior 11 piece Carbon fiber kit

kenchan · 04-12-2011, 11:36 PM

3 hats for me.

Maila87 · 04-20-2011, 02:45 AM

Really nice kit!

If is still no price, can you point price range?

The most common post in this tread is, that if price will be reasonable that member will buy it. Have to agree

Liquid_G · 04-20-2011, 10:10 AM

I'd be willing to bet that list shrinks to less than half once pricing is released..

CarbonSignal · 04-20-2011, 12:32 PM

ok guys, unfortunately our carbon fiber guy had to go on an emergency leave to Philippines so that's the main reason for the delay in pictures and other details.

We will start working on it once he is back as we have just one more guy but he is busy with our normal local market work. These kits need our guy to work for atleast 3-4 days on a single kit, because of finishing required.

We will start making these by third week to end of May and if people can wait which I believe they will, be contacted according to the list which is going on.

For the pricing as we said we will always be competitive so the full kit will cost in the range of 550-700$ depend on the custom work (colour/type of CF) and number of people in the first and only group buy.

We are still trying to find sometime next week to finish the first set and post some installed pictures.

Please add/delete your name if anyone wants to in the ongoing GB Interior kit

1. simota1
2. docaam
3. Nitrouz
4. Metz
5. Jamaica@UAMotorsports
6. AdamX
7. Warbird
8. FastPaced
9. 370ZNISMO#704
10. cheshirecat
11. quagmire87
12. Jquad
13. chuckd05
14. Mr. Q
15. God-Speed
16. kellyefields
17. JuRuKi

kenchan · 04-20-2011, 03:28 PM

Quote:

Originally Posted by CarbonSignal

For the pricing as we said we will always be competitive so the full kit will cost in the range of 550-700$

chuckd05 · 04-20-2011, 04:55 PM

Quote:

Originally Posted by kenchan

me too

simota1 · 04-20-2011, 05:22 PM

wow

ill stick around on the list to see how low it will go..... but man 500-700 cash money

can we custom order just the pieces we want? so itll cost less than that? all i really want is the three gauge hats the rpm bezel and the two other gauge covers (the one on each side of the cluster) the others i dont really care for

could you maybe pm me a ball park figure for just those cs? i was honestly thinking around 300-400 because there were so many pieces.... but 500-700 puts it above my budget for this mod... keep me updated CS!!!! thanks

dev929 · 05-07-2011, 01:23 PM

Im interestested in a red cb kit
added my name...

GB Interior kit

1. simota1
2. docaam
3. Nitrouz
4. Metz
5. Jamaica@UAMotorsports
6. AdamX
7. Warbird
8. FastPaced
9. 370ZNISMO#704
10. cheshirecat
11. quagmire87
12. Jquad
13. chuckd05
14. Mr. Q
15. God-Speed
16. kellyefields
17. JuRuKi
18. dev929

metz · 04-20-2011, 08:06 PM

I agree with them. I'm only interested in the 3 hats, tach cover or top of gauge cluster and the switch plates. I'm not even sure what the other pieces were.

kenchan · 04-20-2011, 08:54 PM

Yah me too, I just want the 3 hats in matte CF.

ala carte FTW!

kenchan · 04-21-2011, 11:35 AM

AJ- please keep us posted when you're ready to ship the 3 hats.

also price list would be great for the indivisual pieces when you're ready.

thanks!

metz · 04-21-2011, 05:35 PM

I think the term overlay has everyone thinking of the cheesy stick on dash kits that are like paper. What Im getting that they are saying is they are basically making a mold of a part and form fitting a piece for it, this piece will be stuck down. As someone who has worked with carbon fiber many times, this is exactly how I would do the gauge "hats" since they are not readily removeable. Its basically the same as "wrapping" say the switch plates, since its nothing more than a piece of carbon fiber resined onto the plastic then floodcoated and finished. Only this is taped down rather than resined in place. Its no different than the fang overlay that everyone uses, a hardened piece of CF form fitting.
Now someone from Carbon Signal correct me if Im offbase here.

CarbonSignal · 04-23-2011, 05:16 AM

Quote:

Originally Posted by metz

I think the term overlay has everyone thinking of the cheesy stick on dash kits that are like paper. What Im getting that they are saying is they are basically making a mold of a part and form fitting a piece for it, this piece will be stuck down. As someone who has worked with carbon fiber many times, this is exactly how I would do the gauge "hats" since they are not readily removeable. Its basically the same as "wrapping" say the switch plates, since its nothing more than a piece of carbon fiber resined onto the plastic then floodcoated and finished. Only this is taped down rather than resined in place. Its no different than the fang overlay that everyone uses, a hardened piece of CF form fitting.
Now someone from Carbon Signal correct me if Im offbase here.

you are right on the spot

3m tape will be used only on window bezels rest no need for anything they will just clip on.

AdamX · 04-23-2011, 01:06 PM

clip on sounds good!!!!!

kenchan · 04-23-2011, 03:23 PM

Quote:

Originally Posted by AdamX

clip on sounds good!!!!!

Yah, most definitely.

04-20-2011, 10:10 AM	#3 (permalink)
Liquid_G A True Z Fanatic Join Date: Aug 2009 Location: Chicago Burbs Posts: 1,439 Drives: 09 370z Supercharged Rep Power: 45	I'd be willing to bet that list shrinks to less than half once pricing is released.. __________________

04-20-2011, 12:32 PM	#4 (permalink)
CarbonSignal A True Z Fanatic Join Date: Jan 2011 Location: Dubai/California Posts: 2,092 Drives: 370z Rep Power: 21	ok guys, unfortunately our carbon fiber guy had to go on an emergency leave to Philippines so that's the main reason for the delay in pictures and other details. We will start working on it once he is back as we have just one more guy but he is busy with our normal local market work. These kits need our guy to work for atleast 3-4 days on a single kit, because of finishing required. We will start making these by third week to end of May and if people can wait which I believe they will, be contacted according to the list which is going on. For the pricing as we said we will always be competitive so the full kit will cost in the range of 550-700$ depend on the custom work (colour/type of CF) and number of people in the first and only group buy. We are still trying to find sometime next week to finish the first set and post some installed pictures. Please add/delete your name if anyone wants to in the ongoing GB Interior kit 1. simota1 2. docaam 3. Nitrouz 4. Metz 5. Jamaica@UAMotorsports 6. AdamX 7. Warbird 8. FastPaced 9. 370ZNISMO#704 10. cheshirecat 11. quagmire87 12. Jquad 13. chuckd05 14. Mr. Q 15. God-Speed 16. kellyefields 17. JuRuKi __________________ CS 2018 Summer Nismo NEW GB............MOONBEAM Forum OFFER.....................09-14 CS Nismolipkit Forum OFFER Facebook.... Instagram ....Website

04-20-2011, 05:22 PM	#7 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 406	wow ill stick around on the list to see how low it will go..... but man 500-700 cash money can we custom order just the pieces we want? so itll cost less than that? all i really want is the three gauge hats the rpm bezel and the two other gauge covers (the one on each side of the cluster) the others i dont really care for could you maybe pm me a ball park figure for just those cs? i was honestly thinking around 300-400 because there were so many pieces.... but 500-700 puts it above my budget for this mod... keep me updated CS!!!! thanks __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Wheels * Super Clearance * 2 Piece / 3 Piece ***	RavSpec	Tires/Wheels	14	05-02-2011 10:38 PM
WORK Wheels * Super Clearance * 2 Piece / 3 Piece ***	RavSpec	RavSpec - JDMwheel	1	04-11-2011 05:38 PM
CarbonSignal in the house.	CarbonSignal	New Forum Member	34	01-26-2011 09:43 AM
Who can wrap an interior piece for me in real CF?	NewYorkJon34	Exterior & Interior	5	07-29-2010 04:31 PM

04-12-2011, 11:36 PM	#1 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	3 hats for me.

04-20-2011, 02:45 AM	#2 (permalink)
Maila87 Base Member Join Date: Apr 2011 Location: Prague Age: 38 Posts: 138 Drives: 370Z Rep Power: 15	Really nice kit! If is still no price, can you point price range? The most common post in this tread is, that if price will be reasonable that member will buy it. Have to agree

05-07-2011, 01:23 PM	#8 (permalink)
dev929 Base Member Join Date: Apr 2011 Location: Houston Posts: 8 Drives: 10 Nissan 370z Nismo Rep Power: 15	Im interestested in a red cb kit added my name... GB Interior kit 1. simota1 2. docaam 3. Nitrouz 4. Metz 5. Jamaica@UAMotorsports 6. AdamX 7. Warbird 8. FastPaced 9. 370ZNISMO#704 10. cheshirecat 11. quagmire87 12. Jquad 13. chuckd05 14. Mr. Q 15. God-Speed 16. kellyefields 17. JuRuKi 18. dev929

04-20-2011, 08:06 PM	#9 (permalink)
metz Enthusiast Member Join Date: Mar 2010 Location: Baton Rouge Posts: 347 Drives: 05 Roush, 2010 40th Rep Power: 16	I agree with them. I'm only interested in the 3 hats, tach cover or top of gauge cluster and the switch plates. I'm not even sure what the other pieces were.

04-20-2011, 08:54 PM	#10 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	Yah me too, I just want the 3 hats in matte CF. ala carte FTW!

04-21-2011, 11:35 AM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	AJ- please keep us posted when you're ready to ship the 3 hats. also price list would be great for the indivisual pieces when you're ready. thanks!

04-21-2011, 05:35 PM	#12 (permalink)
metz Enthusiast Member Join Date: Mar 2010 Location: Baton Rouge Posts: 347 Drives: 05 Roush, 2010 40th Rep Power: 16	I think the term overlay has everyone thinking of the cheesy stick on dash kits that are like paper. What Im getting that they are saying is they are basically making a mold of a part and form fitting a piece for it, this piece will be stuck down. As someone who has worked with carbon fiber many times, this is exactly how I would do the gauge "hats" since they are not readily removeable. Its basically the same as "wrapping" say the switch plates, since its nothing more than a piece of carbon fiber resined onto the plastic then floodcoated and finished. Only this is taped down rather than resined in place. Its no different than the fang overlay that everyone uses, a hardened piece of CF form fitting. Now someone from Carbon Signal correct me if Im offbase here.

04-23-2011, 01:06 PM	#14 (permalink)
AdamX Base Member Join Date: Mar 2011 Location: Freehold,NJ Posts: 164 Drives: 09 370Z PW 7AT Rep Power: 15	clip on sounds good!!!!!