NISMO Titanium Shift Knob installed!!!!

FromG2Z · 07-02-2011, 03:32 PM

^Happy that would work, but why? The black rubber one fits really well... and as Ken said, it contrasts the Ti well. Save your 25 bucks

lochness · 07-02-2011, 06:16 PM

Black shifter installed.

happytheman · 07-02-2011, 07:23 PM

I think you guys may be right, especially after seeing lochness' install! I will listen to your voices of reason!

akong51 · 07-06-2011, 11:15 AM

Quote:

Originally Posted by happytheman

I think you guys may be right, especially after seeing lochness' install! I will listen to your voices of reason!

I also like the rubber finisher. One tip though...if you use a little Armor All on it, it will smooth it out, darken it up and give it a little shine. I was fairly pleased with the results.

kenchan · 07-06-2011, 11:31 AM

Quote:

Originally Posted by akong51

I also like the rubber finisher. One tip though...if you use a little Armor All on it, it will smooth it out, darken it up and give it a little shine. I was fairly pleased with the results.

did i just read "armorall" in a 370Z forum? really?

use Aerospace303 (at minimum) or Prima Nero.

FromG2Z · 07-06-2011, 01:59 PM

Quote:

Originally Posted by kenchan

did i just read "armorall" in a 370Z forum? really?

use Aerospace303 (at minimum) or Prima Nero.

LOL My thoughts exactly Ken.... for once we agree on a product of choice!!! YAY!!! 303 FTW.

Yes, please, no armorall. That's blasphemy

That's like wearing sandals to a wedding, and you're in the wedding party.

akong51 · 07-06-2011, 02:03 PM

Quote:

Originally Posted by kenchan

did i just read "armorall" in a 370Z forum? really?

use Aerospace303 (at minimum) or Prima Nero.

Quote:

Originally Posted by FromG2Z

LOL My thoughts exactly Ken.... for once we agree on a product of choice!!! YAY!!! 303 FTW.

Yes, please, no armorall. That's blasphemy

That's like wearing sandals to a wedding, and you're in the wedding party.

Guys relax...it's just a rubber finisher!

kenchan · 07-06-2011, 02:45 PM

Quote:

Originally Posted by FromG2Z

LOL My thoughts exactly Ken.... for once we agree on a product of choice!!! YAY!!! 303 FTW.

Yes, please, no armorall. That's blasphemy

That's like wearing sandals to a wedding, and you're in the wedding party.

happytheman · 07-05-2011, 10:18 PM

Shift knob and GTR button installed in (no lie) 20 minutes! Since I had the shift knob off, it made installing the starter button sooo much easier! I was able to move the shifter boot and ring completely out of the way. It was not necessary to disconnect SRM or anything!

Thumbs up and REP to G2Z for the write up! Will post pics as time permits!

FromG2Z · 07-05-2011, 11:01 PM

Quote:

Originally Posted by happytheman

Shift knob and GTR button installed in (no lie) 20 minutes! Since I had the shift knob off, it made installing the starter button sooo much easier! I was able to move the shifter boot and ring completely out of the way. It was not necessary to disconnect SRM or anything!

Thumbs up and REP to G2Z for the write up! Will post pics as time permits!

awesome man! yes pics please! and no prob for the help...anytime bro.

kenchan · 07-06-2011, 10:50 AM

Quote:

Originally Posted by happytheman

Shift knob and GTR button installed in (no lie) 20 minutes!

dang, not fair!

happytheman · 07-05-2011, 11:10 PM

Oh yeah..I only needed the strap wrench for the first two revolutions, and thereafter it was all by hand, baby!

FromG2Z · 07-06-2011, 08:14 AM

^ so the strap wrench REALLY worked for you too? Awesome man. So why is Ken the only one breaking his straps???? Is he just that much more buff than us?!?!?!

happytheman · 07-06-2011, 05:09 PM

Quote:

Originally Posted by FromG2Z

^ so the strap wrench REALLY worked for you too? Awesome man. So why is Ken the only one breaking his straps???? Is he just that much more buff than us?!?!?!

Yup, it worked just fine...and I dunno about kenchan's burly manliness, but I was able to remove the sucker by hand in short fashion!

Ok, first initial impressions:

The TI knob is a bit thinner than I might like. I find that I am a palm shifter mote often than not. We'll have to see how it goes after a few days. Did you all have any initial misgivings about the slenderness of the shifter?

Also, MAN THIS BUGGER GETS HOT!

I went inside to get a bit of lunch today and came out an hour later to a truly searing experience! It's ok, I was expecting it...just not so soon!

kenchan · 07-06-2011, 06:09 PM

Quote:

Originally Posted by happytheman

Yup, it worked just fine...and I dunno about kenchan's burly manliness, but I was able to remove the sucker by hand in short fashion!

Ok, first initial impressions:

The TI knob is a bit thinner than I might like. I find that I am a palm shifter mote often than not. We'll have to see how it goes after a few days. Did you all have any initial misgivings about the slenderness of the shifter?

Also, MAN THIS BUGGER GETS HOT!

I went inside to get a bit of lunch today and came out an hour later to a truly searing experience! It's ok, I was expecting it...just not so soon!

It might just be my karate background. You know, all Asians know kongfu and karate and jujitsu and taekwon dont. They're all the same.

As for the slim design it felt alittle different at first but I got use to it and like it.

yah metal knobs can get hot. Its funny how my metal twm knob on my G doesn't get nearly as hot in the sun. It might be due to its matte finish...

07-02-2011, 03:32 PM	#1 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 19	^Happy that would work, but why? The black rubber one fits really well... and as Ken said, it contrasts the Ti well. Save your 25 bucks __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

07-02-2011, 06:16 PM	#2 (permalink)
lochness Base Member Join Date: Mar 2011 Location: Columbus, OH Posts: 110 Drives: 12 WRX STI Sedan Rep Power: 16	Black shifter installed. __________________ Platinum Graphite 2010 370Z w/ Sport Package SOLD Still for Sale HERE - See if you can count the errors in the post New DD and Fun Car - 2012 DGM STI Sedan

07-02-2011, 07:23 PM	#3 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1824	I think you guys may be right, especially after seeing lochness' install! I will listen to your voices of reason! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

07-05-2011, 10:18 PM	#9 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1824	Shift knob and GTR button installed in (no lie) 20 minutes! Since I had the shift knob off, it made installing the starter button sooo much easier! I was able to move the shifter boot and ring completely out of the way. It was not necessary to disconnect SRM or anything! Thumbs up and REP to G2Z for the write up! Will post pics as time permits! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

07-05-2011, 11:10 PM	#12 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1824	Oh yeah..I only needed the strap wrench for the first two revolutions, and thereafter it was all by hand, baby! __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

07-06-2011, 08:14 AM	#13 (permalink)
FromG2Z A True Z Fanatic Join Date: Nov 2010 Location: Fields of Opportunities Posts: 1,406 Drives: '12 5.0, kona, 6MT Rep Power: 19	^ so the strap wrench REALLY worked for you too? Awesome man. So why is Ken the only one breaking his straps???? Is he just that much more buff than us?!?!?! __________________ 2012 5.0 GT Prem, Kona Blue, 6MT, HID, Brembo, 3.73 -- Ordered: 9/20/11, Born on: 10/20/11, Delivered 11/15/11"Marilyn" GT500 mufflers/flaps, MGW shifter, FRPP K springs, BMR panhard bar, Boss coil covers, 3DC spoiler, Llumar Tint (35% and 20%), 3M ClearBra

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo Titanium Shift Knob Open-O Design Installed	karotZ	40th Anniversary 370Z	22	03-04-2011 03:58 PM
FS: NISMO titanium shift knob	VancouverZ34	Parts for sale (Private Classifieds)	5	02-26-2011 08:43 AM
NISMO GT Titanium shift knob!	corner3garage	Body Interior/Exterior	4	01-16-2010 01:52 AM