CarbonSignal Automotive Teaser

Originally Posted by RCZ

fyi...if you leave the fender well covers in there, the vent has absolutely 0 aerodynamic effect...it will only alleviate pressure if its directly open to the tire.

Originally Posted by NewYorkJon34

Ya, im gonna have my installer cut a slit in the fender well to allow air to pass through

Originally Posted by RCZ

What's a slit gonna do?

Originally Posted by NewYorkJon34

Slit/vent, cut a section of the inner fender wall to let air pass through, sound better?

Originally Posted by RCZ

It would sound better except a slit won't do anything because its not enough to evacuate the pressure...you'd need to tear off half your fender well...and even if you did that, you'd never know the difference because you don't track the car...but you knew that

Originally Posted by shumby

lol WTF is up with that litle slit? WTF is that ging to do?

Originally Posted by toner123

IDK I am just as lost as you. Can't see it doing anything since it is a little slit

Originally Posted by NewYorkJon34

Geez, I should have said make a huge opening to allow air to pass through. Sry for any confustion.

Originally Posted by zzdudaka

Would it make any sense(or is it possible) to port the engine bay into the fender area so the vents could be functional to help reduce under hood temps? I am assuming the air flow past the vents would create a vaccuum that could pull air out of th engine bay the comes through the radiator.

Originally Posted by crash1369

If you look at the first pictures that doesn't look possible, there is a large structural, or at least big piece or "frame" that runs right through there