BlueBat's tail light overlays install problems???

SM5654 · 01-22-2011, 05:46 PM

So I took the overlays to a professional tint shop because I have no experience working with vinyl film or tint or anything like that. After assuring me they could do it, it turns out once they had them laid out they couldn't get them to lay down without bubbling and crinkling. They fed me some bull**** about how they were too big and no one could get them to fit. Is the guy at the tint shop just a big idiot and has no skill at all? The whole reason I took it to a shop is because I didn't wanna mess them up... obviously some people have had success with the exact same overlays. So needless to say I'm pissed off and am just looking to see if anyone else that has used these overlays had any problems or if the the tint place I took my Z to is full of a bunch of 5th grade drop outs. Thanks for the piece of mind guys.

Ron · 01-22-2011, 05:52 PM

Same thing happened to me, they couldn't get them to wrap around. Regardless of the amount of heat applied it would still not lay flat..but considering others have done it, I think we chose a bad shop

SM5654 · 01-22-2011, 06:14 PM

Ya I watched them try to do it, they kept telling me they were too big or something. If anyone that has had success in installing these overlays, your input would really be appreciated. Especially if you are around the Dallas area and you found a shop that knows what they are doing.

Bluebatmobile · 01-22-2011, 06:25 PM

I have an authorized installer in Dallas! pm me for contact. Guys, My installers have installerd countless 370z overlays with no issues. Many times these shops will brag about 20 years experience in window tint, but tint is different than Vinyl!

Bat™

Ron · 01-22-2011, 06:53 PM

Dallas is too far away from me

phunk · 01-22-2011, 07:02 PM

were they using a heat gun at all? it really makes the stuff conform

ScGRaceR · 01-22-2011, 07:03 PM

what do the 370z overlays look like?

SM5654 · 01-22-2011, 07:16 PM

ya he was heating it up and stretching it all over... guess he just was used to tint and not vinyl. Hey bat I sent you a pm.

SM5654 · 01-22-2011, 07:18 PM

the main part that was giving them the most trouble was when the light makes that concave turn on the outside of the car and down at the bottom on the rear. I was watching them and it was giving them hell. The overlay was trash after about 10 minutes of them messing with it.

Ron · 01-23-2011, 01:37 AM

^^ Same here, I just got one left, so I might have as well have nothing at all lol. They used a heat gun and the stuff got all soft and flexible but it just would not wrap around.

SM5654 · 01-23-2011, 10:44 AM

yep the exact same spots for me. But to give bat some props, I emailed him about the situation and he hooked me up with some new overlays and a guy in dalls to install them for me that he knows can do it. So you may wanna shoot him an email if you are interested in trying again. Great customer service bluebat! Thanks Andy

NewYorkJon34 · 01-23-2011, 11:40 AM

I went through 2 sets of taillight tint, & bluebat did not give me any free tint. I'm def pissed and at $40 a set, I rather not buy it again. The 370z has the hardest taillights of any car made to tint, I can tell you that for sure.

Ron · 01-23-2011, 01:50 PM

I just need the left taillight overlay replaced but he's got no installer near Houston and the replacement aint gonna be free lol so I think I'm gonna leave the taillights alone for now

Bluebatmobile · 01-23-2011, 04:24 PM

Quote:

Originally Posted by NewYorkJon34

I went through 2 sets of taillight tint, & bluebat did not give me any free tint. I'm def pissed and at $40 a set, I rather not buy it again. The 370z has the hardest taillights of any car made to tint, I can tell you that for sure.

Wait, I'm supposed to give you a free set if you or the installer messed up? I'll offer you a good discount on a new set or if you just need one piece, I'll do that too. I do my best to make my customers happy. Sorry you arent. Maybe I was slow to respond, or not respond at all, please email me and let me know. I'll see what I can do.

Bat™

btw-the most complex overlay to put on are the altimas.

eddieconfetti · 01-23-2011, 05:10 PM

I def agree with andy. I had an altima myself and that is much harder than ours.

01-22-2011, 05:46 PM	#1 (permalink)
SM5654 Base Member Join Date: Oct 2010 Location: Dallas Posts: 56 Drives: 09 MB 370Z M6 Rep Power: 14	BlueBat's tail light overlays install problems??? So I took the overlays to a professional tint shop because I have no experience working with vinyl film or tint or anything like that. After assuring me they could do it, it turns out once they had them laid out they couldn't get them to lay down without bubbling and crinkling. They fed me some bull**** about how they were too big and no one could get them to fit. Is the guy at the tint shop just a big idiot and has no skill at all? The whole reason I took it to a shop is because I didn't wanna mess them up... obviously some people have had success with the exact same overlays. So needless to say I'm pissed off and am just looking to see if anyone else that has used these overlays had any problems or if the the tint place I took my Z to is full of a bunch of 5th grade drop outs. Thanks for the piece of mind guys.

01-22-2011, 06:25 PM	#4 (permalink)
Bluebatmobile The370Z.com Vendor Join Date: Nov 2008 Location: San Diego Posts: 934 Drives: 1997 Acura NSX Rep Power: 17	I have an authorized installer in Dallas! pm me for contact. Guys, My installers have installerd countless 370z overlays with no issues. Many times these shops will brag about 20 years experience in window tint, but tint is different than Vinyl! Bat™ __________________ email: bluebatmobile@san.rr.com custom vinyl overlays: WWW.BLUEBATOVERLAYS.COM facebook:https://www.facebook.com/groups/bluebatoverlays/ @bluebatoverlays on IG

01-22-2011, 07:02 PM	#6 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,655 Drives: 370 Rep Power: 944523	were they using a heat gun at all? it really makes the stuff conform __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

01-22-2011, 07:03 PM	#7 (permalink)
ScGRaceR Enthusiast Member Join Date: Mar 2010 Location: 33908 Posts: 382 Drives: 2010 Nismo,2008 R32 Rep Power: 15	what do the 370z overlays look like? __________________ 2010 PW Nismo: GT-R Start / Stop \| Kenwood Navi / DVD \| Escort X50 \| F.I 18' CF \| F.I Resonated Test Pipes \| PasswordJDM \| Post MAF Tubes \| K&N Drop In's 297 RWHP 9/25/11 WTB SPARE RIM TIRE. PM ME

01-23-2011, 01:37 AM	#10 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	^^ Same here, I just got one left, so I might have as well have nothing at all lol. They used a heat gun and the stuff got all soft and flexible but it just would not wrap around. Last edited by Ron; 01-23-2011 at 01:42 AM.

01-22-2011, 05:52 PM	#2 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Same thing happened to me, they couldn't get them to wrap around. Regardless of the amount of heat applied it would still not lay flat..but considering others have done it, I think we chose a bad shop

01-22-2011, 06:14 PM	#3 (permalink)
SM5654 Base Member Join Date: Oct 2010 Location: Dallas Posts: 56 Drives: 09 MB 370Z M6 Rep Power: 14	Ya I watched them try to do it, they kept telling me they were too big or something. If anyone that has had success in installing these overlays, your input would really be appreciated. Especially if you are around the Dallas area and you found a shop that knows what they are doing.

01-22-2011, 06:53 PM	#5 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Dallas is too far away from me

01-22-2011, 07:16 PM	#8 (permalink)
SM5654 Base Member Join Date: Oct 2010 Location: Dallas Posts: 56 Drives: 09 MB 370Z M6 Rep Power: 14	ya he was heating it up and stretching it all over... guess he just was used to tint and not vinyl. Hey bat I sent you a pm.

01-22-2011, 07:18 PM	#9 (permalink)
SM5654 Base Member Join Date: Oct 2010 Location: Dallas Posts: 56 Drives: 09 MB 370Z M6 Rep Power: 14	the main part that was giving them the most trouble was when the light makes that concave turn on the outside of the car and down at the bottom on the rear. I was watching them and it was giving them hell. The overlay was trash after about 10 minutes of them messing with it.

01-23-2011, 10:44 AM	#11 (permalink)
SM5654 Base Member Join Date: Oct 2010 Location: Dallas Posts: 56 Drives: 09 MB 370Z M6 Rep Power: 14	yep the exact same spots for me. But to give bat some props, I emailed him about the situation and he hooked me up with some new overlays and a guy in dalls to install them for me that he knows can do it. So you may wanna shoot him an email if you are interested in trying again. Great customer service bluebat! Thanks Andy

01-23-2011, 11:40 AM	#12 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	I went through 2 sets of taillight tint, & bluebat did not give me any free tint. I'm def pissed and at $40 a set, I rather not buy it again. The 370z has the hardest taillights of any car made to tint, I can tell you that for sure.

01-23-2011, 01:50 PM	#13 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	I just need the left taillight overlay replaced but he's got no installer near Houston and the replacement aint gonna be free lol so I think I'm gonna leave the taillights alone for now Last edited by Ron; 01-23-2011 at 04:35 PM.

01-23-2011, 05:10 PM	#15 (permalink)
eddieconfetti A True Z Fanatic Join Date: Jun 2009 Location: Duluth, GA Posts: 3,334 Drives: A Totaled PW Z Rep Power: 22	I def agree with andy. I had an altima myself and that is much harder than ours.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Local 370z needed for smoked tail light and head light fitting	dantegts	Southern California Region	11	04-07-2010 07:55 PM
Headlight and tail light overlays	cwj370	Parts for sale (Private Classifieds)	4	12-11-2009 12:24 AM
smoked tail light and head light volunteer covina, ca area	dantegts	Exterior & Interior	0	08-29-2009 12:33 PM
Tail Light Overlays	DIGItonium	Bluebatoverlays.com	4	02-06-2009 11:47 PM