GReddy 370Z Daytime Running Light (DRL) kits

daisuke149 · 09-01-2010, 06:18 PM

mine are on the way, but im planning on having the led's changes/brighter if they are indeed not bright enough. I dont want them to be super bright either tho or they would be overpowering at night.

Rui Z · 09-01-2010, 06:21 PM

Quote:

Originally Posted by PontualZ

Ill copy it right now. They cannot be called drl's haha. They are bright in the dark.

Damn! Too good to be true.

PontualZ · 09-01-2010, 06:32 PM

I like them alot and I recommend it for sure. They aren't as bright as Audi's, but they are bright. I'm very please with them.

Here is a quick comparison

Audi Q5

Z

In the dark it's bright

lemansz20 · 09-01-2010, 06:36 PM

Just wait till someone does this with all those light mods from MR, were gonna see xmas tree Z's rolling around.

Raven · 09-01-2010, 06:39 PM

as someone said before...i wish the they exteneded out a bit longer...and curled upwards towards the edge...

Red__Zed · 09-01-2010, 06:41 PM

Quote:

Originally Posted by PontualZ

I like them alot and I recommend it for sure. They aren't as bright as Audi's, but they are bright. I'm very please with them.

Here is a quick comparison

Audi Q5

Z

In the dark it's bright

Any daytime pics?

christian370z · 09-01-2010, 06:43 PM

Awesome, I should have just gone to GReddy and picked them up in person to save the wait. How much extra wire did you need approximately?

YamahaR6 · 09-01-2010, 07:02 PM

Great DIY!

Does the strip rub/touches the bumper?

Do you have pictures of the strip itself?

Thanks

PontualZ · 09-01-2010, 08:04 PM

DanGizinski-
Here are some pics inside my garage, with the garage door open to show how much it doesn't illuminate anything.

DRL off

DRL on

Sideview

I like it!!
Ill get some better daytime pics when I take it out tomorrow

christian370z-
I used about 6 inches of extra wire and had a good amount of slack left over. It's a pretty straightforward install, but the lack of room behind the headlight and having to take the tape off to separate the green wire was a pain.

YamahaR6-
Yes the strip touches the bumper, it's a very tight fit. I didn't take any pictures of the strip itself, sorry.

2theextreme · 09-01-2010, 08:46 PM

Quote:

Originally Posted by lemansz20

Just wait till someone does this with all those light mods from MR, were gonna see xmas tree Z's rolling around.

Just waiting to get mine so I can add them to my MR Works lights.....can't wait! I hope to have 'em on for Z Nationals @ Z1 Motorsports!

mattjk · 09-01-2010, 09:19 PM

PontualZ, did you have to remove the bumper, or can you slide them into place?

PontualZ · 09-01-2010, 10:53 PM

Bumper needs to come off. It's too tight of a fit to slide them in.

Bster · 09-01-2010, 11:10 PM

If you don't mind, could you take some pictures from a slightly further distance just to be able to see the whole car with a better perspective?

Plenty thanks!

christian370z · 09-02-2010, 02:22 AM

Quote:

Originally Posted by PontualZ

christian370z-
I used about 6 inches of extra wire and had a good amount of slack left over. It's a pretty straightforward install, but the lack of room behind the headlight and having to take the tape off to separate the green wire was a pain.

Gotcha, thanks again as this will make my install go much more smoothly. They look great btw, you should get LED parking lights to round off the LED look.

second_2_nun · 09-02-2010, 02:58 AM

Hmm need mor pics

09-01-2010, 06:43 PM	#97 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	Awesome, I should have just gone to GReddy and picked them up in person to save the wait. How much extra wire did you need approximately? __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

09-01-2010, 11:10 PM	#103 (permalink)
Bster Base Member Join Date: Feb 2009 Location: Singapore Posts: 174 Drives: '09 PW Z34 Manual Rep Power: 16	If you don't mind, could you take some pictures from a slightly further distance just to be able to see the whole car with a better perspective? Plenty thanks! __________________ TEIN Monoflex with EDFC \| H&R 20mm Spacer \| SPC Rear Camber \| HKS Hi-Power \| Berks High Flow Cat \| Stillen G3 \| EVO R Rear Diffuser \| Blacked out headlights \| Z1 34Row Cooler \| Z1 SS Brake lines

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Daytime Running Lights	TacoZ	Exterior & Interior	76	03-07-2015 09:01 PM
DIY - Parking/Running Light LED replacement	TARDCORE	DIY Section (Do-It-Yourself)	14	10-28-2013 12:40 AM
{{GTM & Greddy Twin Turbo Kits AVAILABLE NOW @ ViViD Racing}}	vividracing	Drivetrain/Engine	117	02-06-2012 01:49 PM
FS: White LED Daytime Running Lamps	js1	Parts for sale (Private Classifieds)	14	07-18-2010 07:52 AM

09-01-2010, 06:18 PM	#91 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	mine are on the way, but im planning on having the led's changes/brighter if they are indeed not bright enough. I dont want them to be super bright either tho or they would be overpowering at night.

09-01-2010, 06:32 PM	#93 (permalink)
PontualZ Base Member Join Date: Jul 2010 Location: SD & LA Posts: 156 Drives: 10 370Z / 92 Bronco Rep Power: 14	I like them alot and I recommend it for sure. They aren't as bright as Audi's, but they are bright. I'm very please with them. Here is a quick comparison Audi Q5 Z In the dark it's bright

09-01-2010, 06:36 PM	#94 (permalink)
lemansz20 Banned Join Date: Aug 2009 Location: THe world Posts: 195 Drives: Nissan Maxima Rep Power: 0	Just wait till someone does this with all those light mods from MR, were gonna see xmas tree Z's rolling around.

09-01-2010, 06:39 PM	#95 (permalink)
Raven Base Member Join Date: Jul 2010 Location: Valley Village Posts: 138 Drives: Scion TC Rep Power: 14	as someone said before...i wish the they exteneded out a bit longer...and curled upwards towards the edge...

09-01-2010, 07:02 PM	#98 (permalink)
YamahaR6 Track Member Join Date: Feb 2009 Location: California Posts: 527 Drives: A Car Rep Power: 17	Great DIY! Does the strip rub/touches the bumper? Do you have pictures of the strip itself? Thanks

09-01-2010, 08:04 PM	#99 (permalink)
PontualZ Base Member Join Date: Jul 2010 Location: SD & LA Posts: 156 Drives: 10 370Z / 92 Bronco Rep Power: 14	DanGizinski- Here are some pics inside my garage, with the garage door open to show how much it doesn't illuminate anything. DRL off DRL on Sideview I like it!! Ill get some better daytime pics when I take it out tomorrow christian370z- I used about 6 inches of extra wire and had a good amount of slack left over. It's a pretty straightforward install, but the lack of room behind the headlight and having to take the tape off to separate the green wire was a pain. YamahaR6- Yes the strip touches the bumper, it's a very tight fit. I didn't take any pictures of the strip itself, sorry.

09-01-2010, 09:19 PM	#101 (permalink)
mattjk Enthusiast Member Join Date: Jul 2009 Location: Azusa Posts: 331 Drives: 09 370z K51 09 Elise Rep Power: 266	PontualZ, did you have to remove the bumper, or can you slide them into place?

09-01-2010, 10:53 PM	#102 (permalink)
PontualZ Base Member Join Date: Jul 2010 Location: SD & LA Posts: 156 Drives: 10 370Z / 92 Bronco Rep Power: 14	Bumper needs to come off. It's too tight of a fit to slide them in.

09-02-2010, 02:58 AM	#105 (permalink)
second_2_nun Base Member Join Date: Apr 2009 Location: oc Posts: 35 Drives: 08 bmw e92 Rep Power: 16	Hmm need mor pics