Rear 370Z Emblem Removal or Replacement?

Musashi · 05-15-2009, 06:37 PM

I have been thinking about just removing 370, keeping the Z. I want to replace the nissan badges when something comes out also.

cwj370 · 05-23-2009, 04:07 PM

I have been thinking about just removing 370, keeping the Z. I want to replace the nissan badges when something comes out also.

Thats what I did!

keioh · 05-23-2009, 11:58 PM

Quote:

Originally Posted by cwj370

I have been thinking about just removing 370, keeping the Z. I want to replace the nissan badges when something comes out also.

Thats what I did!

CWJ,
that looks really nice.
Did you reuse the "Z"? what kind of "foam tape" did you use?

nizz23sd · 05-15-2009, 07:08 PM

i removed all the emblems,doors,fenders,hatch,front and rear bumpers,c pillars,side skirts, and mirrors on mine for this big project were working on..any guess?emblems..front and back dont have holes.i used a fishing line to start with and finished it with a gentle used of flat head and wallahh..just be really carefull not to scratch or dent ur paint and body. im currently working on installing my bnm short shifter with trust shift knob.its pain in the butt to take the stock knob off so i just decided to buy the whole shifter.

carfr3ak · 05-23-2009, 01:51 PM

If you guys use goo gone to remove anything off the car, make sure you wash it and reseal that part with wax.

phelan · 05-24-2009, 12:14 AM

Quote:

Originally Posted by carfr3ak

If you guys use goo gone to remove anything off the car, make sure you wash it and reseal that part with wax.

is there anything else to use other than goo gone? something maybe not as abrasive?

i want to swap out my badge for the fairlady z one (yeah i'm a dork for the japanese car names), but i don't want to do any damage while i'm at it..

cwj370 · 05-24-2009, 07:04 AM

Yes, I just reused the Z. I think its 3m auto tape. I actually like the car better without the Z, but I scratched the car with my fingernail, taking it off. So if you are going to remove any of the emblems use the fishing line and no nails!!!

Phimosis · 05-24-2009, 02:03 PM

I would like to Relace the front and rear hamburger with the same design, same size/shape that says "Datsun." Bring the old school back.....

frost · 05-24-2009, 03:15 PM

Quote:

Originally Posted by Phimosis

I would like to Relace the front and rear hamburger with the same design, same size/shape that says "Datsun." Bring the old school back.....

Sounds like a photoshop is in order.

Phimosis · 06-01-2009, 05:18 AM

Quote:

Originally Posted by frost

Sounds like a photoshop is in order.

Can someone Phoshop me a 370z with a front or rear hamburger with a Datsun logo?

desunaito · 08-15-2009, 12:19 PM

I want to pull the nissan emblems off, paint them black then reattach. What kind of adhesive to I need to use to stick the emblems back on?

FricFrac · 08-15-2009, 01:05 PM

Quote:

Originally Posted by desunaito

I want to pull the nissan emblems off, paint them black then reattach. What kind of adhesive to I need to use to stick the emblems back on?

3M double sided tape. Servo tape from a hobby shop would work as well probably.... they have a clear thin one out now instead of the old school black/grey stuff.

FricFrac · 08-15-2009, 01:03 PM

Quote:

Originally Posted by Phimosis

Can someone Phoshop me a 370z with a front or rear hamburger with a Datsun logo?

That's something I pondered. My budy with a 240Z joked about it and was kinda surpised when I told him it was a cool idea. He started rooting through his parts drawers right away

TipsZ · 05-29-2009, 09:59 PM

So does anyone know if there are any replacements for the rear Nissan hamburger yet? I replaced the front emblem with the 350z (z with 3 squares in the center portion of the Z), however, can not find an emblem that fits correctly for the rear Nissan hamburger.

cwj370 · 05-30-2009, 08:58 AM

I've been waiting on The 370Z Source to get the new ones in that are on their web site. Anybody know when that will be?

View Poll Results: Rear 370Z Emblem
Keeping factory 370Z emblem.	134	31.09%
Removing 370Z emblem.	121	28.07%
Replacing 370Z emblem with FairladyZ emblem.	129	29.93%
Undecided.	47	10.90%
Voters: 431. You may not vote on this poll

05-29-2009, 09:59 PM	#14 (permalink)
TipsZ Track Member Join Date: Mar 2009 Location: Lithia, FL Age: 52 Posts: 552 Drives: 09 Nissan 370z CS M6 Rep Power: 188	So does anyone know if there are any replacements for the rear Nissan hamburger yet? I replaced the front emblem with the 350z (z with 3 squares in the center portion of the Z), however, can not find an emblem that fits correctly for the rear Nissan hamburger. __________________ Dynojet 285 HP/245 TQ (pre CBE)// Agency Power CBE // GTM Test Pipes // JWT Pop Chargers // B&M Short Shifter // Eibach Springs // Powder-coated Akebono's // Powder-coated Strut Bar // Black Chromed 19" Rays // // Redline Designs Graphics TipsZ journal

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looks like 370Z is getting rear wiper	AK370Z	Nissan 370Z General Discussions	50	08-25-2010 09:42 PM
Euro fog light (aka b__hole) replacement ideas !	travisjb	Exterior & Interior	21	03-04-2009 09:22 AM
Fairlady Z Emblem for 370Z	Sergio98	Exterior & Interior	6	01-28-2009 08:29 PM
Fog Replacement	370z2	Nissan 370Z General Discussions	32	01-28-2009 06:50 PM

05-15-2009, 06:37 PM	#1 (permalink)
Musashi Enthusiast Member Join Date: Mar 2009 Location: New Jersey Posts: 357 Drives: 09 370Z 6speed Rep Power: 608	I have been thinking about just removing 370, keeping the Z. I want to replace the nissan badges when something comes out also.

05-15-2009, 07:08 PM	#4 (permalink)
nizz23sd Base Member Join Date: Feb 2009 Location: san diego,cali Posts: 76 Drives: nissan 370z 09 Rep Power: 18	i removed all the emblems,doors,fenders,hatch,front and rear bumpers,c pillars,side skirts, and mirrors on mine for this big project were working on..any guess?emblems..front and back dont have holes.i used a fishing line to start with and finished it with a gentle used of flat head and wallahh..just be really carefull not to scratch or dent ur paint and body. im currently working on installing my bnm short shifter with trust shift knob.its pain in the butt to take the stock knob off so i just decided to buy the whole shifter.

05-23-2009, 01:51 PM	#5 (permalink)
carfr3ak Base Member Join Date: May 2009 Location: Nor Cal Posts: 71 Drives: Nissan SUV Rep Power: 18	If you guys use goo gone to remove anything off the car, make sure you wash it and reseal that part with wax.

05-24-2009, 07:04 AM	#7 (permalink)
cwj370 Base Member Join Date: Apr 2009 Location: Tennessee Posts: 121 Drives: 09 370z Bl Tour Auto Rep Power: 18	Yes, I just reused the Z. I think its 3m auto tape. I actually like the car better without the Z, but I scratched the car with my fingernail, taking it off. So if you are going to remove any of the emblems use the fishing line and no nails!!!

05-24-2009, 02:03 PM	#8 (permalink)
Phimosis Enthusiast Member Join Date: May 2009 Location: Oildale, CA Posts: 412 Drives: 2013 911 4S Rep Power: 418	I would like to Relace the front and rear hamburger with the same design, same size/shape that says "Datsun." Bring the old school back.....

08-15-2009, 12:19 PM	#11 (permalink)
desunaito Base Member Join Date: Jun 2009 Location: Seattle, WA Posts: 2 Drives: 2009 370z blue M6 Rep Power: 17	I want to pull the nissan emblems off, paint them black then reattach. What kind of adhesive to I need to use to stick the emblems back on?

05-30-2009, 08:58 AM	#15 (permalink)
cwj370 Base Member Join Date: Apr 2009 Location: Tennessee Posts: 121 Drives: 09 370z Bl Tour Auto Rep Power: 18	I've been waiting on The 370Z Source to get the new ones in that are on their web site. Anybody know when that will be?