Modified B Pillar

Originally Posted by RedNismo

It takes not much heat. So i guess blow dryer would work. I used a heat gun. It's faster and easier to control. Just make sure you don't pull on vinyl too much while it is in the soft state (hot). The vinyl would stretch just a tiny bit in a certain spot and create minor discoloration. unfortunately, I found this out the hard way. I have a little bit of this issue on my roof. But I am not going to waste 150 bucks worth of di noc and redo it though.

By the way, I didn't have to use any heat for the pillars. I only had to use heat on the roof installation.