EVO-R Carbon Fiber front lip - Preview Teaser

kenchan · 09-03-2010, 03:18 PM

nono, i meant more like a DIY, why did you personally not test fit it?

NewYorkJon34 · 09-03-2010, 03:53 PM

well there is already a d.i.y in this thread that evo-r posted, my friend & I held the piece up to the car and it looked good. Ill take pics and put them in order when it gets put on the car.

kenchan · 09-03-2010, 04:23 PM

oh, ok sounds good. looking forward to the picts. probably after labor day, huh?

NewYorkJon34 · 09-03-2010, 04:46 PM

Ya, as soon as he paints the side pieces the lip will go on so it will be this week. I have so many other mods going on as well besides this so I'll prob be posting alot in my journal thread: *NewYorkJon's Journal*

kenchan · 09-03-2010, 06:22 PM

hey looks good so far!

NewYorkJon34 · 09-03-2010, 06:47 PM

I felt bad I didn't get to take pics of the whole kit, so I just got done test fitting the carbon part on the car. I'll post pics in a min...

NewYorkJon34 · 09-03-2010, 07:00 PM

Remember these are only a quick test fit & it will look better with the side pieces.

Cmike2780 · 09-03-2010, 07:04 PM

That looks pretty good.

NewYorkJon34 · 09-03-2010, 07:11 PM

You really think so cmike? Since the carbon is shiny & the black part above the fangs is matte black, I'm not soo sure that it matches?

Cmike2780 · 09-03-2010, 07:28 PM

Quote:

Originally Posted by NewYorkJon34

You really think so cmike? Since the carbon is shiny & the black part above the fangs is matte black, I'm not soo sure that it matches?

Now that I look at it again..

It's ok, but a CF part for the upper part might tie everything together... or maybe if you black out the fangs... what do you think?

kenchan · 09-03-2010, 07:26 PM

Fitment looks okay, but this unit alienates people with CF fangs so hope they release the one compatible with the fangs soon.

neveucd · 09-04-2010, 12:47 PM

Quote:

Originally Posted by kenchan

Fitment looks okay, but this unit alienates people with CF fangs so hope they release the one compatible with the fangs soon.

Didn't Evo-R comment that they weren't going to be releasing a version compatible with the fangs, because it would be too hard to guesstimate how far people pushed their fangs in and how much to trim off the center piece without creating a gap....somewhere further back in this thread???

AK370Z · 09-04-2010, 01:38 PM

Quote:

Originally Posted by kenchan

Fitment looks okay, but this unit alienates people with CF fangs so hope they release the one compatible with the fangs soon.

I can haz picture of the 1 piece cf lip?

Also, kenchan, I mean the front cf overlay fits pretty flush with the front fang. I think one can just install the lip over it. What you think? take a look

NewYorkJon34 · 09-03-2010, 08:12 PM

That a pretty cool PS, idk what I'm gonna do, maybe the side pieces will tie everything together. I just want it to look clean.

chuckd05 · 09-03-2010, 09:36 PM

black out the fangs and paint the whole lip white or get the upper carbon fiber piece... why not test fit the sides too ?

09-03-2010, 07:04 PM	#8 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 31	That looks pretty good. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

09-03-2010, 09:36 PM	#15 (permalink)
chuckd05 A True Z Fanatic Join Date: Oct 2009 Location: NY Posts: 2,391 Drives: No longer a Z Rep Power: 21	black out the fangs and paint the whole lip white or get the upper carbon fiber piece... why not test fit the sides too ? __________________ 09 370Z 6M PW - FBO Best 1/4 mile = 12.926 @ 109 SOLD -- 08 BMW 135i - FBO 12.1@120mph SOLD -- white 09 e92 335 Coupe Mtech - 11.9 @ 119 :-)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
carbon fiber front liecense area cover	darkseed	Nissan 370Z General Discussions	9	03-05-2010 06:55 AM
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
Sneak Peak, Carbon Fiber Front Lip, From The 370ZSOURCE!!!!	Michael@TheZStore	Exterior & Interior	31	04-19-2009 12:51 PM

09-03-2010, 03:18 PM	#1 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	nono, i meant more like a DIY, why did you personally not test fit it?

09-03-2010, 03:53 PM	#2 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	well there is already a d.i.y in this thread that evo-r posted, my friend & I held the piece up to the car and it looked good. Ill take pics and put them in order when it gets put on the car.

09-03-2010, 04:23 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	oh, ok sounds good. looking forward to the picts. probably after labor day, huh?

09-03-2010, 04:46 PM	#4 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	Ya, as soon as he paints the side pieces the lip will go on so it will be this week. I have so many other mods going on as well besides this so I'll prob be posting alot in my journal thread: NewYorkJon's Journal

09-03-2010, 06:22 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	hey looks good so far!

09-03-2010, 06:47 PM	#6 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	I felt bad I didn't get to take pics of the whole kit, so I just got done test fitting the carbon part on the car. I'll post pics in a min...

09-03-2010, 07:00 PM	#7 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	Remember these are only a quick test fit & it will look better with the side pieces.

09-03-2010, 07:11 PM	#9 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	You really think so cmike? Since the carbon is shiny & the black part above the fangs is matte black, I'm not soo sure that it matches?

09-03-2010, 07:26 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	Fitment looks okay, but this unit alienates people with CF fangs so hope they release the one compatible with the fangs soon.

09-03-2010, 08:12 PM	#14 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1067	That a pretty cool PS, idk what I'm gonna do, maybe the side pieces will tie everything together. I just want it to look clean.