6mt shift knob change, new boot?

spearfish25 · 06-12-2010, 02:11 PM

I'm considering swapping shift knobs but I'm curious what you guys did with the shift boot. The stock knob has a pretty wide base that flattens the boot where they touch. Is the stock boot reusable or will I need to replace it?

I'm considering a Sparco knob...anyone have experience with them?

Modshack · 06-12-2010, 02:53 PM

Quote:

Originally Posted by spearfish25

I'm considering swapping shift knobs but I'm curious what you guys did with the shift boot. The stock knob has a pretty wide base that flattens the boot where they touch. Is the stock boot reusable or will I need to replace it?

I'm considering a Sparco knob...anyone have experience with them?

Keep in mind, most aftermarket knobs mount with set-screws. I think the Sparco does. YOu may be happier with a dedicated threaded knob like the ones from TWM. (thead M10x 1.25) My weighted one with the pattern engraved is awesome and no finisher needed using the Redline boot. If you insist on retaining the cheap plastic OEM boot, then Z toys makes a finisher that wil work with aftermarket knobs...

Also, any knob made for a Mata will be the correct thread and pitch. Google Voodoo knobs:

The stock boot is kinda cheezy...

m4a1mustang · 06-12-2010, 02:59 PM

Here is the finisher and Voodoo shift knob Modshack is referring to. The knob is the "pearl" finish which looks really nice. I wish TWM offered a weighted knob in this finish!

I think I'm going to order a TWM knob anyways because they are height adjustable. I would set it to the highest height possible since I like longer throws.

spearfish25 · 06-12-2010, 03:01 PM

Great advice. Thanks! +rep

Where did you buy your leather boot?

Modshack · 06-12-2010, 03:08 PM

Quote:

Originally Posted by spearfish25

Great advice. Thanks! +rep

Where did you buy your leather boot?

Go to: Shift boot store - RedlineGoods leather shift boots

and custom configure the boot you need. Mine is for a 350 and fits pefectly. Guys have said the 370 one is off a bit...

spearfish25 · 06-12-2010, 03:11 PM

I was just playing around on their site. Trying to decide if black faux-alcantara with orange stitching would be tasteful or not.

m4a1mustang · 06-12-2010, 03:13 PM

Quote:

Originally Posted by spearfish25

I was just playing around on their site. Trying to decide if black faux-alcantara with orange stitching would be tasteful or not.

I was looking at the faux-alcantara but it looks like felt sheets from Michael's Arts & Crafts.

Modshack · 06-12-2010, 03:19 PM

My Big, Honkin Retro black Q-ball is for sale! This thing actually feels great...

2.25" for a manly grip! $40

m4a1mustang · 06-12-2010, 03:21 PM

That's a big ball you got there, Steve! (BTW, I got your package yesterday.)

^ That just sounds bad.

spearfish25 · 06-12-2010, 03:38 PM

Thanks Steve. I'm actually looking for a more vertical, cylindrical shifter. I may go with the Nismo carbon-fiber, but I hate that it says Nismo. I do like your first pic of the oblong TMW knob. I just know it will flash-freeze my palm in the winter.

(I was going to ask you to post a pic palming your ball to judge the size, but I don't feel right asking a man to photograph his ball in his hand)

.

batman_4 · 06-12-2010, 03:40 PM

i opted for a "suede" boot. looking how to make it sit flush w/my shift knob though...the boot is great though, matches w/the middle portion of the touring seats and the insert on the door panels.

m4a1mustang · 06-12-2010, 03:42 PM

What shift knob is that? Looks fantastic!

Modshack · 06-12-2010, 03:43 PM

Quote:

Originally Posted by m4a1mustang

That's a big ball you got there, Steve! (BTW, I got your package yesterday.)

Heh!.....Btw, I have an interested party on the car...If he's a no-go, the TWM might be available...I'll keep you posted..

Quote:

Originally Posted by spearfish25

(I was going to ask you to post a pic palming your ball to judge the size, but I don't feel right asking a man to photograph his ball in his hand)

.

...Thank you!....BTW, check the Voodoo site. They make some vertical ones that are a direct screw on. Oops...just checked and NO but there are other Miata knobs designed this way...

http://www.thompson-automotive.com/voodoo.html

batman_4 · 06-12-2010, 03:49 PM

Quote:

Originally Posted by m4a1mustang

What shift knob is that? Looks fantastic!

Forged Performance knob. really great

JollyGoodChap · 12-02-2010, 01:23 PM

has anyone ever bought bride gradation fabric and made a boot with this? i think it would be a pretty cool touch for the car. It's pretty pricey but I'm sure you can make a few of them with the size it comes in Bride Fabric (Gradation) Inner Cushion Material - 100cm x 76cm - More Japan :: Since 2003

Google image search

06-12-2010, 02:11 PM	#1 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1858	6mt shift knob change, new boot? I'm considering swapping shift knobs but I'm curious what you guys did with the shift boot. The stock knob has a pretty wide base that flattens the boot where they touch. Is the stock boot reusable or will I need to replace it? I'm considering a Sparco knob...anyone have experience with them? __________________ 2013 Cadillac V-Wagon, RIP Z

06-12-2010, 03:01 PM	#4 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1858	Great advice. Thanks! +rep Where did you buy your leather boot? __________________ 2013 Cadillac V-Wagon, RIP Z

06-12-2010, 03:11 PM	#6 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1858	I was just playing around on their site. Trying to decide if black faux-alcantara with orange stitching would be tasteful or not. __________________ 2013 Cadillac V-Wagon, RIP Z

06-12-2010, 03:19 PM	#8 (permalink)
Modshack A True Z Fanatic Join Date: Mar 2009 Location: Greenville NC Posts: 2,883 Drives: 370Z Sport Rep Power: 978	My Big, Honkin Retro black Q-ball is for sale! This thing actually feels great... 2.25" for a manly grip! $40 __________________ Steal my car! (SOLD)...Now Porsche Cayman S Oil Cooler DIY: Here! Last edited by Modshack; 06-12-2010 at 03:26 PM.

06-12-2010, 03:21 PM	#9 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6964	That's a big ball you got there, Steve! (BTW, I got your package yesterday.) ^ That just sounds bad. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

06-12-2010, 03:38 PM	#10 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1858	Thanks Steve. I'm actually looking for a more vertical, cylindrical shifter. I may go with the Nismo carbon-fiber, but I hate that it says Nismo. I do like your first pic of the oblong TMW knob. I just know it will flash-freeze my palm in the winter. (I was going to ask you to post a pic palming your ball to judge the size, but I don't feel right asking a man to photograph his ball in his hand) . __________________ 2013 Cadillac V-Wagon, RIP Z

06-12-2010, 03:40 PM	#11 (permalink)
batman_4 A True Z Fanatic Join Date: Dec 2008 Location: McAllen Tx. Posts: 1,038 Drives: '09 PW 370Z Rep Power: 369	i opted for a "suede" boot. looking how to make it sit flush w/my shift knob though...the boot is great though, matches w/the middle portion of the touring seats and the insert on the door panels. __________________ '09 6spd. Touring: Eibach / SPC / Motordyne / Berk / Z1 / Oneighty / Mines / SSR / Stillen / CFE

06-12-2010, 03:42 PM	#12 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6964	What shift knob is that? Looks fantastic! __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

12-02-2010, 01:23 PM	#15 (permalink)
JollyGoodChap Enthusiast Member Join Date: Aug 2010 Location: Lust Angeles Posts: 328 Drives: Z34 Rep Power: 16	has anyone ever bought bride gradation fabric and made a boot with this? i think it would be a pretty cool touch for the car. It's pretty pricey but I'm sure you can make a few of them with the size it comes in Bride Fabric (Gradation) Inner Cushion Material - 100cm x 76cm - More Japan :: Since 2003 Google image search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Shift Boot Install	E-Licious	DIY Section (Do-It-Yourself)	8	10-06-2020 11:36 AM
New shift boot help	theDreamer	Exterior & Interior	4	01-29-2010 05:24 PM
WTB OEM Shift Boot.	Rps13.jw	Parts for sale (Private Classifieds)	0	10-09-2009 05:43 PM
Aftermarket shift knob with short throw shifter and factory boot	m4a1mustang	Exterior & Interior	18	06-09-2009 08:15 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM