Help Identify Mystery Missing Tools

SoCal 370Z · 02-11-2009, 12:38 AM

I hope this thread is not redundant as I have looked through the forum, but in the trunk spare tire area there is a styrofoam overlay that has two formed depressions molded into it. Ours were empty, and we are wondering whether others actually have the tools or they were never shipped to the States? Thanks!

M.Bonanni · 02-11-2009, 12:44 AM

No tools in my Z either.

SoCal 370Z · 02-11-2009, 12:50 AM

Quote:

Originally Posted by DDMotorsports

No tools in my Z either.

Hmmmm, well, one looks to be a screwdriver, and the other (I am guessing) a tire gauge.

AK370Z · 02-11-2009, 12:58 AM

One does look awfully close to a screwdriver shape but the other one, I have no clue. Interesting...

RCZ · 02-11-2009, 08:05 AM

JDM Pyrometer!

Phil Wallace · 02-11-2009, 09:21 AM

I checked the 370Z tech certification booklet and there is no mention.
I have another Master Tech going to training tomorrow (Thursday) and I gave him printouts of the mystery molds to inquire about.
I checked the Nissan accessory guides and nothing seems to match.

I will post if I find anything out. I'm going to assume that it is along the lines of the eye hook molds in the Altima where there is a place to put one if you decide to buy one for they no longer come from the factory with it.

SoCal 370Z · 02-11-2009, 10:49 AM

Quote:

Originally Posted by Phil Wallace

I have another Master Tech going to training tomorrow (Thursday) and I gave him printouts of the mystery molds to inquire about.

REP POINTS! And thanks!

SoCal 370Z · 02-11-2009, 12:53 PM

Phil,

While you are at it can you please ask why we do not get the nice black license plate holder bracket as shown on the Japanese model? Instead we are given two bolts, and license plate rub rash (Where's the justice?). Also, note parking sensors in bumper (you can see them in both the front and rear bumpers if you go to AK370Z's albums).

Yet another photo pilfered from AK370Z's many albums.

MaximumPwr · 02-11-2009, 04:33 PM

^^^^^ I want one of these brackets.

MC · 02-11-2009, 05:05 PM

looks like the one on the right is for a 10mm socket. maybe the JDM ones come with the tools and ours dont or its like a space for some accessory kit

Phil Wallace · 02-11-2009, 05:12 PM

Even the GTR just has two non stainless clips for the plate on the rear, no plate holder. I take them off my cars and throw them away and replace them with SS same with my plate scres from the factory.
Remember, the is the company that stopped putting the info plates in the engine compartment to save .40 per vehicle.

As far as the parking sensors, I'm sure they have to leave something for future models to have...

I can send you some body shop clips that you can fire thru your bumper to get the same effect<jk>

SoCal 370Z · 02-11-2009, 05:18 PM

Quote:

Originally Posted by Phil Wallace

I can send you some body shop clips that you can fire thru your bumper to get the same effect<jk>

Phil, I was at least hoping for some titanium clips if I have to settle for less.

Phil Wallace · 02-11-2009, 05:36 PM

All us Z owners are always trying to shave weight.

Try driving a TT in the summer with the A/C system sitting on a bench in your garage to save weight.

Phil Wallace · 02-13-2009, 09:20 AM

OK, no luck with the Nissan training school. They didn't know...
I'm trying to push this up the ladder and get an answer, it going to take some time.

Gas Hed · 02-13-2009, 01:30 PM

Same deal with my '04 G 35. This is likely the remnant of an old design. Nissan is probably recycling molding tools as they can. They probably found an old tool that would work for the Z, modified it, but didn't maching away that cavity.

But I could be wrong...

02-11-2009, 12:38 AM	#1 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	Help Identify Mystery Missing Tools I hope this thread is not redundant as I have looked through the forum, but in the trunk spare tire area there is a styrofoam overlay that has two formed depressions molded into it. Ours were empty, and we are wondering whether others actually have the tools or they were never shipped to the States? Thanks! Last edited by SoCal 370Z; 02-11-2009 at 01:44 AM.

02-11-2009, 12:44 AM	#2 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	No tools in my Z either. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

02-11-2009, 12:58 AM	#4 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	One does look awfully close to a screwdriver shape but the other one, I have no clue. Interesting... __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

02-11-2009, 12:53 PM	#8 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	Rear License Plate Bracket Phil, While you are at it can you please ask why we do not get the nice black license plate holder bracket as shown on the Japanese model? Instead we are given two bolts, and license plate rub rash (Where's the justice?). Also, note parking sensors in bumper (you can see them in both the front and rear bumpers if you go to AK370Z's albums). Yet another photo pilfered from AK370Z's many albums. Last edited by SoCal 370Z; 02-11-2009 at 12:58 PM.

02-11-2009, 05:05 PM	#10 (permalink)
MC Moderator Join Date: Oct 2008 Location: NC Posts: 3,238 Drives: 2015 GTR NISMO Rep Power: 23	looks like the one on the right is for a 10mm socket. maybe the JDM ones come with the tools and ours dont or its like a space for some accessory kit Last edited by MC; 02-11-2009 at 05:10 PM.

02-11-2009, 08:05 AM	#5 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	JDM Pyrometer!

02-11-2009, 09:21 AM	#6 (permalink)
Phil Wallace Base Member Join Date: Feb 2009 Location: Connecticut Posts: 34 Drives: 1991 300ZX TT Rep Power: 219	I checked the 370Z tech certification booklet and there is no mention. I have another Master Tech going to training tomorrow (Thursday) and I gave him printouts of the mystery molds to inquire about. I checked the Nissan accessory guides and nothing seems to match. I will post if I find anything out. I'm going to assume that it is along the lines of the eye hook molds in the Altima where there is a place to put one if you decide to buy one for they no longer come from the factory with it.

02-11-2009, 04:33 PM	#9 (permalink)
MaximumPwr Base Member Join Date: Jan 2009 Location: Houston Posts: 78 Drives: 2009 370Z Rep Power: 16	^^^^^ I want one of these brackets.

02-11-2009, 05:12 PM	#11 (permalink)
Phil Wallace Base Member Join Date: Feb 2009 Location: Connecticut Posts: 34 Drives: 1991 300ZX TT Rep Power: 219	Even the GTR just has two non stainless clips for the plate on the rear, no plate holder. I take them off my cars and throw them away and replace them with SS same with my plate scres from the factory. Remember, the is the company that stopped putting the info plates in the engine compartment to save .40 per vehicle. As far as the parking sensors, I'm sure they have to leave something for future models to have... I can send you some body shop clips that you can fire thru your bumper to get the same effect<jk>

02-11-2009, 05:36 PM	#13 (permalink)
Phil Wallace Base Member Join Date: Feb 2009 Location: Connecticut Posts: 34 Drives: 1991 300ZX TT Rep Power: 219	All us Z owners are always trying to shave weight. Try driving a TT in the summer with the A/C system sitting on a bench in your garage to save weight.

02-13-2009, 09:20 AM	#14 (permalink)
Phil Wallace Base Member Join Date: Feb 2009 Location: Connecticut Posts: 34 Drives: 1991 300ZX TT Rep Power: 219	OK, no luck with the Nissan training school. They didn't know... I'm trying to push this up the ladder and get an answer, it going to take some time.

02-13-2009, 01:30 PM	#15 (permalink)
Gas Hed Base Member Join Date: Feb 2009 Location: Delaware Posts: 12 Drives: 04 G35 Coupe Rep Power: 219	Same deal with my '04 G 35. This is likely the remnant of an old design. Nissan is probably recycling molding tools as they can. They probably found an old tool that would work for the Z, modified it, but didn't maching away that cavity. But I could be wrong...