Window wont go up after reset.

[Pwny]

I installed new speakers yesterday and lost my bass. Reversed the wires and now I have bass. Unfortunately my driver side window will not roll back up at all. I have tried the 20 sec reset multiple times but its not working. With the door closed I cannot hear the click of the relay announcing its working. It only starts clicking when the door is open and continues to click every 3-5 seconds with the door closed. I have swapped the motor from the passenger side to the driver side and no change. The motor was hot when I took it off the driver side. I installed the driver side motor onto the passenger door and the window rolls up just fine so I know the motor is good. Driver side motor (that was previously passenger side) was hot when I took it off the door again. I'm pretty sure the clicking is the relay trying to work but I can't find anything on the net to where its location is. I can operate the passenger window from driver switch so I'm pretty sure the switch is fine too. It's cold outside and we are due for rain so I really need to get this window up. I have no idea what to do. Speedy replies are gratefully requested.

Edit.
I plugged the motor cable back in putting the door back together and it started turning. I think the clicking sound I hear now is it trying to turn the regulator.

[SouthArk370Z]

Wiring diagrams, component locations, etc are in the FSM (link in sig).