Passenger Window Issue. Window Reset Doesn't Work

vil9j

Lately whenever my passenger opens and closes the door the window rolls down half way and both buttons do not work to bring it back up.

Then I would have to keep holding the button up, start the car, turn it off, tinker with it, and repeat for about 10 minutes until it goes up again.

I've tried safely removing the battery, window reset procedure, looking for a fuse(couldn't find) etc. Seems like a bug in the system or not enough voltage to the regulator. However it's weird since the passenger window is rarely used.

If anyone has had this problem or fixed it with another method let me know. Thanks in advance.

Sent from my LG-H931 using Tapatalk

__________________
POWERTRIX UL COILS W/ SWIFT SPRINGS | STILLEN PULLEY | MOTORDYNE INTAKE MANIFOLD | STILLEN GEN 3 INTAKES | MOTORDYNE ART PIPES | MOTORDYNE Y-PIPE RESONATED | MEISTERSCHAFT MIDPIPE | MEISTERSCHAFT AXEL-BACK | NITTO NT-05 TIRES | SPL REAR-CAMBER-ARMS | UPREV TUNE| WHP

SouthArk370Z

Maybe it's the door-closed switch. Check with a multimeter.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

vil9j

Problem still there**

So I decided to unplug both the Passenger power window switch and door jamb switch.

Reconnected them and now I can open and close the door freely without the window dropping halfway.

*How to remove power window switch(go to 1:00 min)
https://youtu.be/PR2B6RSjCYE

*How to remove door jamb switch(go to 30sec)
https://youtu.be/kQNaAUo39Aw

Sent from my LG-H931 using Tapatalk

__________________
POWERTRIX UL COILS W/ SWIFT SPRINGS | STILLEN PULLEY | MOTORDYNE INTAKE MANIFOLD | STILLEN GEN 3 INTAKES | MOTORDYNE ART PIPES | MOTORDYNE Y-PIPE RESONATED | MEISTERSCHAFT MIDPIPE | MEISTERSCHAFT AXEL-BACK | NITTO NT-05 TIRES | SPL REAR-CAMBER-ARMS | UPREV TUNE| WHP