STILLEN 370Z Urethane Fascia - Sneak Peek - In Development

Caravanshaka · 02-27-2010, 11:42 AM

oh, and any idea how this will fit with Injen intakes that have he filters down below the headlights? It's either going to be a tight fit, or it's going to be perfect for a ram-air addition.

Kyle@STILLEN · 02-27-2010, 11:44 AM

Quote:

Originally Posted by travisjb

also looking forward to info on the optional/modular brake ducting setup

Me too!

I'm hoping to incorporate some components from our GT R brake cooling kit which has NASCAR style fans so that when you're on the track you have additional cooling via the fans. They are extremely effective on the GT R and we see temperature drops of a couple hundred degrees when really pushing hard.

Kyle@STILLEN · 02-27-2010, 11:45 AM

Quote:

Originally Posted by Caravanshaka

oh, and any idea how this will fit with Injen intakes that have he filters down below the headlights? It's either going to be a tight fit, or it's going to be perfect for a ram-air addition.

I don't know that answer yet. We have found a smaller windshield washer bottle which I believe will be located in the same area as the injen filter but I'm not 100% sure about that. We wanted to relocate that windshield washer bottle so that it was out of the way of the openings and you didn't see some giant ugly white bottle with blue liquid in that vent.

travisjb · 02-27-2010, 02:41 PM

Quote:

Originally Posted by Kyle@STILLEN

Me too!

I'm hoping to incorporate some components from our GT R brake cooling kit which has NASCAR style fans so that when you're on the track you have additional cooling via the fans. They are extremely effective on the GT R and we see temperature drops of a couple hundred degrees when really pushing hard.

very trick... keep us updated and if you need another test car...

simota1 · 02-27-2010, 03:12 PM

looks absolutely sick.... i think i like the side skirts more than the s tune.... and i LOVE the fact the kit aint fiberglass stillen FTW!!!

jmlenz · 02-27-2010, 07:36 PM

Not to get too far ahead of ourselves, but is there going to be a Stillen rear fascia? Maybe one to compliment the front with large vents like the factory Nismo only larger

htt760 · 02-27-2010, 07:42 PM

great job on the front fascia...it looks clean but but yet very effective.. Do you think maybe some (grill guards for the side vents) will look nice... It may look wierd when looking straight through something like the vents

I like the mesh guard that came on the stock evo 9's.... subtle but very effective for rocks and other things that would like to fly in there....

<pic> http://cdn1.ioffer.com/img/item/111/...msVavYEpbu.jpg </pic>

Mike@Blackline · 02-27-2010, 09:44 PM

Quote:

Originally Posted by Josh@STILLEN

hawt. really good looking plus functionality ftw!

G Fo12ce · 02-28-2010, 09:41 AM

Josh, if you have it I think it would be good to show another rendering without the black along the lower chin spoiler. Curious to see what it looks like paint matched.

RCZ · 02-28-2010, 10:36 AM

Hope Stillen doesnt mind, its just for the sake of seeing it in one color.

37Z · 02-28-2010, 01:35 PM

Could you blend the side vent openings?
Who is manufacturing it out of polyurethane (east coast or west coast)?

speedoflife · 02-28-2010, 02:56 PM

Quote:

Originally Posted by RCZ

Hope Stillen doesnt mind, its just for the sake of seeing it in one color.

That looks good.

RCZ · 02-28-2010, 03:39 PM

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

G Fo12ce · 02-28-2010, 03:45 PM

Quote:

Originally Posted by RCZ

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

I say go painted. It works on the NISMO and if you change your mind I'm sure you could go vinyl or easily paint that section later.

Mike · 02-28-2010, 05:29 PM

Quote:

Originally Posted by RCZ

Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

I guess I'm lucky mine is black, it will look about the same either way. I may go unpainted in the center though, if its black urethane, just to keep the chips down.

02-27-2010, 11:42 AM	#121 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	oh, and any idea how this will fit with Injen intakes that have he filters down below the headlights? It's either going to be a tight fit, or it's going to be perfect for a ram-air addition. __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

02-27-2010, 03:12 PM	#125 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	looks absolutely sick.... i think i like the side skirts more than the s tune.... and i LOVE the fact the kit aint fiberglass stillen FTW!!! __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

02-27-2010, 07:42 PM	#127 (permalink)
htt760 Base Member Join Date: May 2009 Location: Bonsall, CA (San Diego) Posts: 246 Drives: 2009 Base 370z Rep Power: 16	great job on the front fascia...it looks clean but but yet very effective.. Do you think maybe some (grill guards for the side vents) will look nice... It may look wierd when looking straight through something like the vents I like the mesh guard that came on the stock evo 9's.... subtle but very effective for rocks and other things that would like to fly in there.... <pic> http://cdn1.ioffer.com/img/item/111/...msVavYEpbu.jpg </pic> __________________ http://i39.photobucket.com/albums/e1...f/Huys3701.jpg Volks LE 37's 19x9.5 - 19x10.5 (+12 offset), Status Elite Intakes and Some fast Stickers

02-28-2010, 09:41 AM	#129 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	Josh, if you have it I think it would be good to show another rendering without the black along the lower chin spoiler. Curious to see what it looks like paint matched. __________________ Nismo Suspension: New Owners Check Here!

02-28-2010, 01:35 PM	#131 (permalink)
37Z Enthusiast Member Join Date: Jun 2009 Location: Florida Posts: 476 Drives: 370Z MB 6M -sold Rep Power: 263	370Z front bumper cover Could you blend the side vent openings? Who is manufacturing it out of polyurethane (east coast or west coast)?

02-27-2010, 07:36 PM	#126 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	Not to get too far ahead of ourselves, but is there going to be a Stillen rear fascia? Maybe one to compliment the front with large vents like the factory Nismo only larger

02-28-2010, 10:36 AM	#130 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Hope Stillen doesnt mind, its just for the sake of seeing it in one color.

02-28-2010, 03:39 PM	#133 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Yeah it looks good either way. I'm trying to decide what will look better. Everyone with a modified z around here has that blacked out center area, getting a little played out for me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber front fascia?	kannibul	Exterior & Interior	21	09-30-2009 01:19 AM
front fascia cost?	Snakes709	Nissan 370Z General Discussions	7	09-22-2009 07:15 AM
Sneak Peek, Carbon Fiber B-Pillars @ The 370ZSOURCE!!!	Michael@TheZStore	Exterior & Interior	3	08-25-2009 05:21 PM
Sneak Peek, Carbon Fiber Door Sills @ The 370ZSOURCE!!!!!	Michael@TheZStore	Exterior & Interior	2	07-29-2009 03:58 PM
Going to sneak a peek at a 2010 Genesis Coupe in a few minutes!!!	iamtherhino	Other Vehicles	5	03-07-2009 10:08 AM