Installed Braum Elite X Seats

marrawi · 03-18-2018, 11:47 PM

Quote:

Originally Posted by johnnydrama

Thank you I appreciate it!

Carid.com is a Braum distributor and I bought my seats and Planted brackets from them. They have a very large selection of Braum seats available and the price is the same or lower than anywhere else I have seen them listed.

I followed this DIY link on the forum and it satisfied the airbag lights and weight sensor on the passenger side. It should have everything you need to remedy these issues.

DIY: [How-To:] Racing Seat airbag light fix

I also snapped a couple additional photos in the daylight the other day.

Thanks! So you were able to place the weight sensor Inside the BRAUM seat? Have you tested it? Does it engage, activate airbag, when you sit on the passenger side?

johnnydrama · 03-19-2018, 09:02 AM

Quote:

Originally Posted by marrawi

Thanks! So you were able to place the weight sensor Inside the BRAUM seat? Have you tested it? Does it engage, activate airbag, when you sit on the passenger side?

I was able to install the sensors under the seat between the seat springs and pad and it works when I try it out (I weigh 170lbs). However it is still not working at the suggested 80lb mark as it was intended. Probably due to the fact it is intended to sit directly under your bottom with only a layer of cloth between. They way I have it currently there is several inches of foam in between your bottom and the sensor. I do not want to run the risk of tearing/ruining the Braum seats therefore this was the best I could do without removing the leatherette, placing the sensor, and then re-attaching the leatherette.

Therefore I have purchased the workaround at the link below which will have the airbag on at all times.

Nissan 350z 370z Passenger Seat Occupancy Sensor OCCUPANT CLASSIFICATION SENSOR EMULATOR

marrawi · 03-19-2018, 09:31 AM

Quote:

Originally Posted by johnnydrama

I was able to install the sensors under the seat between the seat springs and pad and it works when I try it out (I weigh 170lbs). However it is still not working at the suggested 80lb mark as it was intended. Probably due to the fact it is intended to sit directly under your bottom with only a layer of cloth between. They way I have it currently there is several inches of foam in between your bottom and the sensor. I do not want to run the risk of tearing/ruining the Braum seats therefore this was the best I could do without removing the leatherette, placing the sensor, and then re-attaching the leatherette.

Therefore I have purchased the workaround at the link below which will have the airbag on at all times.

Nissan 350z 370z Passenger Seat Occupancy Sensor OCCUPANT CLASSIFICATION SENSOR EMULATOR

Smart man. I bought the airbag360 too. I didn't want to tear both seats for something that won't work well.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (socal) stiller cai, braum racing seats, swift spec-r lowering springs	Gthdavid	Parts for sale (Private Classifieds)	36	03-25-2018 01:53 PM
[FOR SALE] Red braum racing seats with harnesses	Om_z34	Parts for sale (Private Classifieds)	6	09-27-2017 02:49 AM
Corbeau and Braum seats suggestion	SyndicateZ	Exterior & Interior	1	08-26-2017 08:55 PM
Vivid Racing \| Braum Racing Seats Sleek and Affordable	vividracing	Body Interior/Exterior	0	10-12-2016 12:17 PM
New seats installed!	boomboom	Exterior & Interior	31	02-18-2010 12:17 AM