INGS+1 Rep Front Lip

Leingod · 06-02-2017, 07:03 AM

Quote:

Originally Posted by CharmCityZ

So any word on if this can be made to fit the 13+?

Yea, it'll fit. Nothing changed on the underside of the bumper and the DRL's don't interfere with the symmetric of anything.

Leingod · 06-02-2017, 09:50 AM

Amazing find! Debating on pulling the trigger on the 1st version style right now. $170 shipped is dirt cheap for blades. Especially if they're aluminium and powdercoated.

Can you take some photos of the blades if you have some time? I may be ordering some tonight at this rate....

littlejuanito · 06-02-2017, 09:52 AM

Quote:

Originally Posted by Leingod

Amazing find! Debating on pulling the trigger on the 1st version style right now. $170 shipped is dirt cheap for blades. Especially if they're aluminium and powdercoated.

Can you take some photos of the blades if you have some time? I may be ordering some tonight at this rate....

The V2 look definitively better since they have the little wing at the back. I'll take some pics later this evening.

Leingod · 06-02-2017, 09:57 AM

Quote:

Originally Posted by littlejuanito

The V2 look definitively better since they have the little wing at the back. I'll take some pics later this evening.

I just wonder how they'll look with the INGS on the front since that also has the raised wing shaped on the sides. Wondering if it would look offsetting with dual wings technically. The V2 do look better than the V1 though.

littlejuanito · 06-02-2017, 10:04 AM

Quote:

Originally Posted by Leingod

I just wonder how they'll look with the INGS on the front since that also has the raised wing shaped on the sides. Wondering if it would look offsetting with dual wings technically. The V2 do look better than the V1 though.

Exactly my same thoughts. That's why I've delayed installing the INGs. Out of the two, I like the blades much better and these guys at Aeroflowdynamics also have the aluminum splitter and rear diffusers

CharmCityZ · 07-11-2017, 11:51 PM

Found this on one of the 370z Facebook groups, apparently it fits with 0 modifications.

daveb91 · 07-12-2017, 04:32 AM

I wondered since the stock front air dam is the same on all years..

Leingod · 07-12-2017, 08:08 AM

Let's test out Flickr...

IMG_20170502_173622_zpszlgke8vb by Michael Guerrieri, on Flickr

Leingod · 07-12-2017, 08:10 AM

Leingod · 07-12-2017, 08:18 AM

That was a wokout transferring from photobucket to flickr. hahahaha

Yellowwolf · 07-12-2017, 09:14 AM

Is that raw or did you paint it? Car year? Thanks

Leingod · 07-12-2017, 09:56 AM

Quote:

Originally Posted by Yellowwolf

Is that raw or did you paint it? Car year? Thanks

Unpainted. I purchased a long roll of 3m carbon fiber tape to eventually put on it. Otherwise I highly recommend getting it painted and sealed correctly otherwise it will begin to turn yellow over time.

Car is 2009, but the front lip will fit all model years other than Nismo. Nothing has changed drastically.

370deep · 07-12-2017, 04:51 PM

Does this require bumper removal? From the picture looks like it fits on 13+ bumper.

daveb91 · 07-12-2017, 07:52 PM

Quote:

Originally Posted by 370deep

Does this require bumper removal? From the picture looks like it fits on 13+ bumper.

From page 7 it really does..

ChaseZ · 07-12-2017, 08:03 PM

Quote:

Originally Posted by 370deep

Does this require bumper removal? From the picture looks like it fits on 13+ bumper.

You could probably do it with the bumper on though I'm sure it would be much easier with it off. It only takes a few minutes to remove the bumper cover anyhow so in my mind that's essentially a non-issue.

06-02-2017, 09:50 AM	#2 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,065 Drives: In Circles Rep Power: 2684398	Amazing find! Debating on pulling the trigger on the 1st version style right now. $170 shipped is dirt cheap for blades. Especially if they're aluminium and powdercoated. Can you take some photos of the blades if you have some time? I may be ordering some tonight at this rate.... littlejuanito likes this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

07-12-2017, 08:08 AM	#8 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,065 Drives: In Circles Rep Power: 2684398	Let's test out Flickr... IMG_20170502_173622_zpszlgke8vb by Michael Guerrieri, on Flickr __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

07-12-2017, 08:10 AM	#9 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,065 Drives: In Circles Rep Power: 2684398	cooltoy, carlitos_370z and ChaseZ like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR Last edited by Leingod; 07-12-2017 at 08:17 AM.

07-12-2017, 08:18 AM	#10 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,065 Drives: In Circles Rep Power: 2684398	That was a wokout transferring from photobucket to flickr. hahahaha carlitos_370z and ChaseZ like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

07-12-2017, 09:14 AM	#11 (permalink)
Yellowwolf Base Member Join Date: Feb 2017 Location: Maggie Valley, NC Posts: 216 Drives: 2014 370z, BC sport Rep Power: 10	Is that raw or did you paint it? Car year? Thanks __________________ Life is full of changes, adapt and overcome

07-12-2017, 04:32 AM	#7 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 26	I wondered since the stock front air dam is the same on all years..

07-12-2017, 04:51 PM	#13 (permalink)
370deep Base Member Join Date: Feb 2015 Location: South Carolina Posts: 130 Drives: 2015 370z M/T Rep Power: 12	Does this require bumper removal? From the picture looks like it fits on 13+ bumper.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
INGS+1 Front Lip	CremeFraiche	Exterior & Interior	45	06-14-2016 06:50 AM
Front Lip Sale - Ings +1 and JP USA Front Spoilers Now Available!!	DriveLineEric	Body Interior/Exterior	101	08-19-2014 11:07 PM
WTB: INGS+1 Front Lip CF	tsolin01	Wanted	2	05-01-2011 08:17 PM
INGS +1 front lip	Calvin	Parts for sale (Private Classifieds)	7	04-29-2011 01:13 PM
New INGs front lip	370Ztune	Exterior & Interior	11	12-23-2009 02:05 PM