Introducing the New RJ MFG Strut Tower Brace!

RJ MFG · 09-06-2016, 10:25 AM

More info coming soon! including color options and pricing!

DarkJak · 09-06-2016, 01:17 PM

Will it fit with the plastic cover at the top part next to the windshield? Also, does it fit with the stock engine cover?

bullitt5897 · 09-06-2016, 01:45 PM

Quote:

Originally Posted by DarkJak

Will it fit with the plastic cover at the top part next to the windshield? Also, does it fit with the stock engine cover?

From the pictures and my discussion with the guys at RJ MFG it will fit the stock intake manifold and cover. Also for the rear mounts they are still looking at hardware. the current hardware which are Grade 10 bolts would require some small holes to be cut in the vented area to make sure everything latches properly. A drill bit or dremel should suffice...

RJ MFG · 09-09-2016, 08:33 AM

Quick Update:

For those following this thread we were planning on having a fully powdercoated and ready to go production unit today. However our laser cutter is a little behind on schedule meaning it will have to wait until next week. Fear not we will post plenty of pictures and post a price next week.

To answer some questions we have already received:

1. Will this fit a stock plenum car?
A. Yes this will fit any plenum on the market.

2. Is it stronger than the factory unit?
A. Yes, the chromoly is much stronger than the factory unit and its significantly lighter.

3. Will there be a group buy?
A. At this time we are only offering a discount to those who already bought the gtr conversion. If you buy the conversion there is a SIGNIFICANT discount by bundling the strut tower bar.

4. What colors are available?
A. Any powder coat color is available. We will have a set of standard colors available at no additional cost. Special order colors will be available.

5. Can I get it in Titanium?
A. Well of course you can but be prepared for a $2k+ price tag.

EZT · 09-09-2016, 11:39 AM

Man you guys weren't kidding, you got on the ball. Looks great so far, definitely looking forward to a finished product and pricing.

RJ MFG · 09-15-2016, 10:16 AM

Quick update:

We have already started production on the first 10 units. The first production unit will be complete and installed come friday. We should have pictures and possible feature video following.

Pricing has been determined and MSRP has been set @ $699. All current owners of RJ MFG GTR Conversions will receive a $100 Discount. For the first 10 buyers we will extend this discount to you as well. So this means if you already have a gtr conversion (there are 30+ customers) and the first 10 non owners will pay $599.

Included in this price will be:
Choice of Wrinkle Black or Wrinkle Red "in stock" colors
or
Choice of 5 base colors (TBD)
All needed hardware and Base plates

Options Coming Soon:
Engine Dampener
Catch can kit (single or dual)

RJ MFG · 09-23-2016, 01:42 PM

Ladies and Gentlemen,

I present you Nismo Red!

bullitt5897 · 09-23-2016, 08:51 PM

That looks amazing! Totally getting one! Great price on the group buy too!

cooltoy · 09-23-2016, 10:36 PM

I would put those brackets underneath so they are not visible and cap the ends of the tubing so it looks better.

I understand that this is for function, but it should look good too,

bullitt5897 · 09-23-2016, 11:15 PM

Quote:

Originally Posted by cooltoy

I would put those brackets underneath so they are not visible and cap the ends of the tubing so it looks better.

I understand that this is for function, but it should look good too,

I agree with caping the ends. However, the plate brackets are on both the top and bottom. It helps with rigidity...

cooltoy · 09-23-2016, 11:58 PM

I see. Maybe the welds for the top ones could be on the inderside for a cleaner look.

azza12311 · 09-24-2016, 09:13 AM

wow man i love it. did a great job

bullitt5897 · 09-24-2016, 10:06 AM

Quote:

Originally Posted by cooltoy

I see. Maybe the welds for the top ones could be on the inderside for a cleaner look.

That's not possible given the space constraints... The only way to get the look your going for would be to weld tabs on the bars and screw down the plates and then you will have lost the structural rigidity to the part. The end caps I can see but the welds on the top will have to be there... You just can't get a tig welder in that tight of a space... Even free handing you wouldn't be able to do it.

RJ MFG · 09-24-2016, 10:28 AM

Bullitt is right... the top plates cannot be welded from below due to the distance between the tubes and the radius of those tubes. Now for those that want the end caps we can do that as an option but it would cost $50 to make the cap plates and weld them on. We can add them at that cost but it will need to be requested.

RJ MFG · 09-24-2016, 02:16 PM

For those interested in the GB please follow the link below. We have also updated the first post:

GROUP BUY PAGE: GROUP BUY: Adjustable GTR Conversion Strut Tower Bar

09-06-2016, 10:25 AM	#31 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	More info coming soon! including color options and pricing! __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

09-06-2016, 01:17 PM	#32 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,390 Drives: 2009 370Z Rep Power: 13448	Will it fit with the plastic cover at the top part next to the windshield? Also, does it fit with the stock engine cover? __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

09-09-2016, 08:33 AM	#34 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	Quick Update: For those following this thread we were planning on having a fully powdercoated and ready to go production unit today. However our laser cutter is a little behind on schedule meaning it will have to wait until next week. Fear not we will post plenty of pictures and post a price next week. To answer some questions we have already received: 1. Will this fit a stock plenum car? A. Yes this will fit any plenum on the market. 2. Is it stronger than the factory unit? A. Yes, the chromoly is much stronger than the factory unit and its significantly lighter. 3. Will there be a group buy? A. At this time we are only offering a discount to those who already bought the gtr conversion. If you buy the conversion there is a SIGNIFICANT discount by bundling the strut tower bar. 4. What colors are available? A. Any powder coat color is available. We will have a set of standard colors available at no additional cost. Special order colors will be available. 5. Can I get it in Titanium? A. Well of course you can but be prepared for a $2k+ price tag. bullitt5897 and JARblue like this. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

09-09-2016, 11:39 AM	#35 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 535 Drives: 09 370z Rep Power: 315	Man you guys weren't kidding, you got on the ball. Looks great so far, definitely looking forward to a finished product and pricing. bullitt5897 likes this.

09-15-2016, 10:16 AM	#36 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	Quick update: We have already started production on the first 10 units. The first production unit will be complete and installed come friday. We should have pictures and possible feature video following. Pricing has been determined and MSRP has been set @ $699. All current owners of RJ MFG GTR Conversions will receive a $100 Discount. For the first 10 buyers we will extend this discount to you as well. So this means if you already have a gtr conversion (there are 30+ customers) and the first 10 non owners will pay $599. Included in this price will be: Choice of Wrinkle Black or Wrinkle Red "in stock" colors or Choice of 5 base colors (TBD) All needed hardware and Base plates Options Coming Soon: Engine Dampener Catch can kit (single or dual) Carbon_z, Ni55anPat, EZT and 1 others like this. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

09-23-2016, 01:42 PM	#37 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	Ladies and Gentlemen, I present you Nismo Red! bullitt5897, EZT, axmea? and 1 others like this. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

09-23-2016, 08:51 PM	#38 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	That looks amazing! Totally getting one! Great price on the group buy too! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

09-23-2016, 10:36 PM	#39 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	I would put those brackets underneath so they are not visible and cap the ends of the tubing so it looks better. I understand that this is for function, but it should look good too, bullitt5897 and mag_black like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

09-23-2016, 11:58 PM	#41 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,938 Drives: 14 PW 370Z S/T MT Rep Power: 240204	I see. Maybe the welds for the top ones could be on the inderside for a cleaner look. scope22 likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

09-24-2016, 09:13 AM	#42 (permalink)
azza12311 Base Member Join Date: Sep 2015 Location: australia Posts: 153 Drives: nissan 370z ,r34 Rep Power: 9	wow man i love it. did a great job bullitt5897 likes this.

09-24-2016, 10:28 AM	#44 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	Bullitt is right... the top plates cannot be welded from below due to the distance between the tubes and the radius of those tubes. Now for those that want the end caps we can do that as an option but it would cost $50 to make the cap plates and weld them on. We can add them at that cost but it will need to be requested. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

09-24-2016, 02:16 PM	#45 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 283	For those interested in the GB please follow the link below. We have also updated the first post: GROUP BUY PAGE: GROUP BUY: Adjustable GTR Conversion Strut Tower Bar __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Strut tower brace	blake29	Parts for sale (Private Classifieds)	3	09-23-2015 07:03 PM
[WTB] strut tower bar brace	blak max	Parts for sale (Private Classifieds)	7	04-18-2015 08:55 PM
strut tower brace material?	edub370	Exterior & Interior	12	09-22-2012 01:01 AM
WTB: OEM Strut tower brace	daisuke149	Wanted	7	10-27-2010 08:50 AM
WTB: OEM Nismo Strut Tower Brace	'10Anamoly	Wanted	0	07-13-2010 08:30 AM