Removing that plastic piece in order to remove engine strut

MenZerna · 07-14-2016, 08:08 AM

Hi all, I feel like a squid for posting this but I'm removing the engine strut brace and I'm having difficulty with that plastic piece - part of the windshield wiper cowl in the middle, that needs to be removed in order to access the two screws and the top of the brace.

I removed the two clips. Is there more? I started to pry on it and heard breaking noises !

Dirk McGurck · 07-14-2016, 08:35 AM

Pretty sure it's a couple plastic clips and then some molded parts. Shouldn't need a screwdriver too much to move it.

ChaseZ · 07-14-2016, 09:32 AM

I saw in instructions for something or other that there were four of those clips. Mine had only two, and I assumed that some older models that may have been the case. Wasn't too much of a pull to get that cover piece off for me with just my hand.

Trips · 07-14-2016, 09:40 AM

Remove the two plastic fasteners and lift up from, and pull from one of the sides of the covers to release the clips it pops into.

You won't break it, but don't go caveman on it either.

MenZerna · 07-15-2016, 05:57 PM

I got it. After I put a LOT of light on the situation, I was able to tell that I was pulling wrong. The piece is about half as big as I thought it was.

Thanks all.

ChaseZ · 07-15-2016, 07:34 PM

Quote:

Originally Posted by MenZerna

I got it. After I put a LOT of light on the situation, I was able to tell that I was pulling wrong. The piece is about half as big as I thought it was.

Thanks all.

I usually imagine the piece I'm pulling is twice its size. Not half

Glad you got it figured out

07-14-2016, 08:08 AM	#1 (permalink)
MenZerna Base Member Join Date: Jun 2016 Location: Tampa Bay Posts: 28 Drives: 2014 370Z Base Rep Power: 37	Removing that plastic piece in order to remove engine strut Hi all, I feel like a squid for posting this but I'm removing the engine strut brace and I'm having difficulty with that plastic piece - part of the windshield wiper cowl in the middle, that needs to be removed in order to access the two screws and the top of the brace. I removed the two clips. Is there more? I started to pry on it and heard breaking noises !

07-14-2016, 08:35 AM	#2 (permalink)
Dirk McGurck Track Member Join Date: Jun 2014 Location: Delaware Posts: 715 Drives: 09 MB 370Z Touring Rep Power: 20	Pretty sure it's a couple plastic clips and then some molded parts. Shouldn't need a screwdriver too much to move it. MenZerna likes this. __________________ 2009 370Z Touring with Sport

07-14-2016, 09:32 AM	#3 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94682	I saw in instructions for something or other that there were four of those clips. Mine had only two, and I assumed that some older models that may have been the case. Wasn't too much of a pull to get that cover piece off for me with just my hand. MenZerna likes this.

07-14-2016, 09:40 AM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Remove the two plastic fasteners and lift up from, and pull from one of the sides of the covers to release the clips it pops into. You won't break it, but don't go caveman on it either. gomer_110 and MenZerna like this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody know how to remove the hatch plastic trim?	'10Anamoly	Exterior & Interior	5	11-30-2014 11:51 AM
Remove Plastic wheel well liners?	GSS138	Track / Autocross / Drifting / Dragstrip	4	11-16-2014 02:34 PM
how to remove the plastic to install the tow hook?	Juruki	Exterior & Interior	13	11-06-2014 01:14 AM
Removing the dealer plastic name tag	hawkerpilot62	Nissan 370Z General Discussions	25	08-01-2013 09:23 PM
Removing plastic near the fangs?	vehl	Exterior & Interior	2	07-25-2009 02:50 AM

07-15-2016, 05:57 PM	#5 (permalink)
MenZerna Base Member Join Date: Jun 2016 Location: Tampa Bay Posts: 28 Drives: 2014 370Z Base Rep Power: 37	I got it. After I put a LOT of light on the situation, I was able to tell that I was pulling wrong. The piece is about half as big as I thought it was. Thanks all.