Seibon Carbon Fiber Hood TS Style

NickD · 04-20-2016, 12:25 PM

Just wondering if anyone else with this hood has experienced that it does not sit straight when put down and just resting, not latched. Is one side higher than the other before latching the sides shut?

Eagle · 04-20-2016, 12:44 PM

Quote:

Originally Posted by NickD

Just wondering if anyone else with this hood has experienced that it does not sit straight when put down and just resting, not latched. Is one side higher than the other before latching the sides shut?

This can be adjusted by raising or lowering the latches that surround the center latch with the spring. Also it could be that your hood was mounted slightly crooked, which is easily fixed by loosening the bolts that attach the hood to the hinges, then the hood can be repositioned to your liking.

Eagle · 04-20-2016, 12:46 PM

Quote:

Originally Posted by NickD

Just wondering if anyone else with this hood has experienced that it does not sit straight when put down and just resting, not latched. Is one side higher than the other before latching the sides shut?

I just realized, what you asked here...but why do you care how it sits when it's not latched?

NickD · 04-20-2016, 01:05 PM

Quote:

Originally Posted by Eagle

I just realized, what you asked here...but why do you care how it sits when it's not latched?

Because when i latch it down on the drivers side i'm practically bending it to force it to latch because 1 side is sitting higher than the other. I'm worried about the stress thats putting on the hood and it may crack. I also dont think it's normal to sit uneven like that so wanted to see if others had the issue.

I even put the hood on my living room floor with no hardware on it at all and one side is lower than the other.

Seibon is trying to tell me it's normal.

OptionZero · 04-20-2016, 01:07 PM

Having experienced Seibon hoods before on other cars, I would not be surprised if the mold was imperfect resulting in an imbalanced car. You're getting what you pay for with these mass produced hoods.

I bought a "Type-TA" hood for my S14 and it was completely warped. Uneven gaps on both sides, just ****** up.

NickD · 04-20-2016, 01:15 PM

Quote:

Originally Posted by OptionZero

Having experienced Seibon hoods before on other cars, I would not be surprised if the mold was imperfect resulting in an imbalanced car. You're getting what you pay for with these mass produced hoods.

I bought a "Type-TA" hood for my S14 and it was completely warped. Uneven gaps on both sides, just ****** up.

It's not a cheap hood though so to say getting what I paid for isnt quite right. At a minimum it should sit straight.

Eagle · 04-20-2016, 01:16 PM

Quote:

Originally Posted by NickD

Because when i latch it down on the drivers side i'm practically bending it to force it to latch because 1 side is sitting higher than the other. I'm worried about the stress thats putting on the hood and it may crack. I also dont think it's normal to sit uneven like that so wanted to see if others had the issue.

I even put the hood on my living room floor with no hardware on it at all and one side is lower than the other.

Seibon is trying to tell me it's normal.

I also cannot close mine by just pushing the hood down. I actually let it drop from about 6 inches above the core support and it locks in place and i don't put stress on the drivers side. The whole hood absorbs and distributes the impact. I don't know if that's something you're willing to try but i have been closing mine like that for 2 years now and it hasn't damaged the hood at all.

OptionZero · 04-20-2016, 01:19 PM

having to drop the hood with force to latch it seems sub optimal . . . are hoods from Varis or Amuse like that?

NickD · 04-20-2016, 01:22 PM

Quote:

Originally Posted by Eagle

I also cannot close mine by just pushing the hood down. I actually let it drop from about 6 inches above the core support and it locks in place and i don't put stress on the drivers side. The whole hood absorbs and distributes the impact. I don't know if that's something you're willing to try but i have been closing mine like that for 2 years now and it hasn't damaged the hood at all.

When your hood is not latched and just resting down is it sitting even?

cooltoy · 04-20-2016, 01:23 PM

Even the stock hood should be closed by dropping it. It's the best way. Pressing any hood down is not optimal.

cooltoy · 04-20-2016, 01:26 PM

Hotrodz · 04-20-2016, 01:27 PM

Quote:

Originally Posted by OptionZero

having to drop the hood with force to latch it seems sub optimal . . . are hoods from Varis or Amuse like that?

I have a Fugimura vented hood and of the same quality as the two you mentioned and I dropped the hood as Eagle has suggested. It is actually the proper way to close the hood.

Sent from my SM-N910P using Tapatalk

NickD · 04-20-2016, 01:28 PM

My hood wont catch the driver's side latch if i drop it. It's too far away and needs to be pushed down separate from the passengers side. Seibon told me to push down hard on the drivers side to see if it latches. lol

NickD · 04-20-2016, 01:33 PM

This is what I'm dealing with... and the rubber bumpers dont help. I've tried.

Hotrodz · 04-20-2016, 01:35 PM

Have you tried realigning it...loosen the hinges and then close it to were the pins line up if possible. Then raise it so it doesn't move and tighten it up.

Sent from my SM-N910P using Tapatalk

04-20-2016, 12:25 PM	#1 (permalink)
NickD A True Z Fanatic Join Date: Mar 2012 Location: Babylon, NY Posts: 1,322 Drives: 10 Z34 Touring Vert Rep Power: 15	Seibon Carbon Fiber Hood TS Style Just wondering if anyone else with this hood has experienced that it does not sit straight when put down and just resting, not latched. Is one side higher than the other before latching the sides shut? __________________ 2010 370z Touring Roadster Monterey Blue My Z Photo Library

04-20-2016, 01:19 PM	#8 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,162 Drives: 15 370Z Nismo 6MT Rep Power: 203226	having to drop the hood with force to latch it seems sub optimal . . . are hoods from Varis or Amuse like that? NickD likes this.

04-20-2016, 01:23 PM	#10 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,948 Drives: 14 PW 370Z S/T MT Rep Power: 240365	Even the stock hood should be closed by dropping it. It's the best way. Pressing any hood down is not optimal. Eagle, Hotrodz and KapitalZ like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-20-2016, 01:26 PM	#11 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,948 Drives: 14 PW 370Z S/T MT Rep Power: 240365	TriNismo and KapitalZ like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-20-2016, 01:28 PM	#13 (permalink)
NickD A True Z Fanatic Join Date: Mar 2012 Location: Babylon, NY Posts: 1,322 Drives: 10 Z34 Touring Vert Rep Power: 15	My hood wont catch the driver's side latch if i drop it. It's too far away and needs to be pushed down separate from the passengers side. Seibon told me to push down hard on the drivers side to see if it latches. lol __________________ 2010 370z Touring Roadster Monterey Blue My Z Photo Library

04-20-2016, 01:07 PM	#5 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,162 Drives: 15 370Z Nismo 6MT Rep Power: 203226	Having experienced Seibon hoods before on other cars, I would not be surprised if the mold was imperfect resulting in an imbalanced car. You're getting what you pay for with these mass produced hoods. I bought a "Type-TA" hood for my S14 and it was completely warped. Uneven gaps on both sides, just ****** up.

04-20-2016, 01:33 PM	#14 (permalink)
NickD A True Z Fanatic Join Date: Mar 2012 Location: Babylon, NY Posts: 1,322 Drives: 10 Z34 Touring Vert Rep Power: 15	This is what I'm dealing with... and the rubber bumpers dont help. I've tried. __________________ 2010 370z Touring Roadster Monterey Blue My Z Photo Library

04-20-2016, 01:35 PM	#15 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Have you tried realigning it...loosen the hinges and then close it to were the pins line up if possible. Then raise it so it doesn't move and tighten it up. Sent from my SM-N910P using Tapatalk Eagle and madwi like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] SOCAL: Evo-R Carbon Fiber Side Blades, Seibon Gt-Style Carbon Fiber Front Lip's	sxfs4956	Parts for sale (Private Classifieds)	21	09-24-2014 07:15 AM
Seibon TS Style Carbon Fiber Hood	nmanfredi43	Parts for sale (Private Classifieds)	22	11-07-2013 11:11 PM
New front lip Seibon SR Style Carbon fiber	nguy3nt0mmy21	Exterior & Interior	19	04-16-2013 11:54 AM
FS:Seibon GT-R style carbon hood	Elysium	Canada	25	12-16-2011 08:03 PM
FS: Socal - Seibon GTR-Style Carbon Fiber Hood For Sale	tazma61	Parts for sale (Private Classifieds)	33	12-10-2010 08:33 PM