Carbonsignal Custom GTR Style Display Screen

CarbonSignal

UPDATE 29th June 2016

Unfortunately because of current workload of line of products we are discontinuing this item. We will advise anyone who purchased this in the past and has any issue please contact so we can get it corrected, all units were sold with one year warranty for peace of mind.


UPDATE!!!!!!!!!!!!!! 7th September 2015

Kit ONE:
Comes with 7' screen, HDMI cable, rotary joystick, control module, and optional extra sensor ports

Here are the details and purchase details in Gb thread

Console comes in three finishes and design is simple but without airlift module as in DEMO pics its just the joystick by default.

Console FRP
Console FRP painted matte black
Console CF
Console Wrapped in leather and alcantara additional

Everything working in the pics and video is only via OBDII, but for boosted guys following are optional sensors needed if any of these readings are needed, oil temp does come via OBDII and all other. There is a port for these already in the module so all what is needed is hooking up the sensors and two or three wires in the module

Below are additional sensors incase anyone needs these

Exhaust Gas Temperature (EGT) K-Type thermocouple probe sensor
Oil Temperature Sensor
Boost (MAP) Pressure Sensor
Intake Air Temperature Sensor
Intercooler Air Temperature Sensor
Fuel Temperature Sensor
Transmission Oil Temperature Sensor
Gearbox Oil Temperature Sensor
Exhaust Manifold Pressure Sensor
Fuel Pressure Sensor
Oil Pressure Sensor / Sender
AFR (Air Fuel Ratio) Wideband Controller Functionality


Kit TWO:

Its for people already with navi screen, kit comes with, rotary joystick, control module, and optional extra sensor ports in the module

OBDII reader with cable is needed for both kits

For Navi screen guys there is not need for screen and buyer will keep all existing functionalities of stock screen like navi, audio etc.



















We created a new thread when saw some people were interested in the GTR style guage/screen we have.

Normally biggest size it comes in is 4.3" as below with an option of 6 reading in one go and there is a joystick to move around or change the parameters. In total you can have 12 or more parameters. There is a lot of customization possibility people can run one/two/four gauges at a time which makes the size bigger. It comes with installed parameters to be measured from OBD or direct from sensors and boost and A/F sensor is optional. People can use existing AEM/DEFI/other Air Fuel ratio sensors as well and plug an output to display A/F in this screen



These pictures of same size screen 4.3" fabricated in G37 Coupe made a bracket in FRP for the screen to be placed in sunglass holder












There is another option to have one to three small screens to be installed on A pillar




Also round gauges for top three meters



And can be hooked up to an android tablet as well



Lots of options but as we saw more people interested we worked out a better option in addition to these. 7" screen similar size as OEM navi ones and we will make a cubby console in multiple finishes (FRP/painted/leather wrapped/vinyl wrapped/CF) and integrated joystick to use the features of the screen along with CS touches. This piece should be a straight fit in non navi cars. We still need to do RnD for the screen holder which we will do once we see the interest need more people to make it work for 7" screen. It will have optional nissan or Z logo as well in one of the place can be kept or removed.

Another good feature is this can be plugged with OBDII port for non FI cars and people can still enjoy getting all the available reading.

The graphics are very smooth and sensors works spot on we have used in few cars and guy are really happy with the outcome. Below are the pictures of 7" screen done in R34 with GTR logo.






We will offer with an opening logo for 1 sec then an option to run Z/Nissan/CS logo the whole time




Frost prototype



We can open a GB thread if atleast 10 people are there to offer this price

Cost breakdown:
Screen (HDMI cable, rotary joystick, Boost port sensor): 650$
Boost sensor (if someone needs): 60$
AFR wideband controller and sensor: 240$ (for people already having wideband sensor installed can be offered with an input port of free then no need to buy this AFR)
OBDII reader with cable: 120$

Total price ranges from 770$ (screen+OBDII) to 1070$ (Screen+Boost+AFR+OBDII)

Console will in price range of 150$-450$ ranges from FRP to CF and can be done in vinyl/leather/alcantara wrapped.

These prices are assuming a GB

__________________