![]() |
Once you open your lights don't touch the inside of the covers. Set them in none dusty area. Use a fine grit sand paper make the chrome go away. Prime
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#5 (permalink) |
|
A True Z Fanatic
![]() Join Date: Dec 2011
Location: Pensacola Florida
Posts: 1,696
Drives: Awesome Car
Rep Power: 28 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Once you open your lights don't touch the inside of the covers. Set them in none dusty area.
Use a fine grit sand paper make the chrome go away. Prime and paint. What ever paint you use ensure the primer is made for it. Don't mix paints. If you mess up, spray with oven cleaner and wipe it all off and start again. If you use a 3 stage paint (primer, base, clear) you would want to use a promoter. For the basic rattle can paints its not needed. (Do not use high temp resistant paint) it bubbles up, dont use engine enamel, caliper paint ect.. Krylon works fine, if you color match to your paint code, PM me and ill send you a good place to get your color code. Hope this helps.
__________________
Did new cool science stuff to the car !!!
http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 01-23-2015 at 11:00 PM. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Is there an alternative to painters tape??? | Osiris | Exterior & Interior | 10 | 08-19-2012 11:54 PM |
| DFW or Houston painters | DEpointfive0 | Texas | 9 | 04-07-2012 10:58 AM |
| Car Speed Signal Input and Reverse Gear Signal Input tap locations? | rdavidw | Audio & Video | 11 | 09-11-2011 07:24 AM |
| Blue painters tape on front? | ddvette9 | Exterior & Interior | 36 | 05-14-2010 04:52 PM |
| New Headlight Design!!! Need your Input! | bullitt5897 | Nissan 370Z Photos / Spyshots / Video / Media Gallery | 101 | 02-27-2010 07:51 PM |